Bows with double satin ribbon. Ribbon bows: satin, wide, nylon

Gathered for a visit, chose a gift, now you don’t know how to pack it? Then you are at the right place. In this article, we will look at how to make a ribbon bow for decorating gifts, and also tell you how you can make an exclusive present for every taste from a regular ribbon.

How to create a festive mood?

Nicely wrapped gift original decoration always creates festive mood, and it doesn’t matter if you give it or gave such a present to you. It is a beautiful bow, which can be called a classic decoration technique, that “warms up” the fantasy, making you tremble in anticipation of a surprise. The originality of this decoration lies in its versatility, since a ribbon bow can be made in different shapes or sizes, and today's market offers the widest selection of colors, from plain to complex patterns. Such decorations can give the souvenir more solemnity. Initially, you need to pack a surprise in gift paper, how to do it, read the article: well, we will teach you how to make a bow from a ribbon, most importantly, be patient and not quit work after the first failure, because a wonderful grateful smile of the hero of the occasion, to which you gathered in guests deserves a little effort.

How to make a voluminous ribbon bow to decorate a gift?

To get a really voluminous bow, you need to give preference to cuts made of hard material. Having picked up the ribbon, we do the following:

Having decided on the size of the bow (the longer the loops, the larger the bow will be), you need to make loops from the tape in 5–9 additions, laying them one on top of the other.
Smooth out the resulting loops and carefully trim the edges, as indicated in the photo below. You should get almost triangles around the edges.
Take the loops in the middle and part them on the sides so that the cut parts are in the center.
Fasten the narrowest central part. You can do this:

the same ribbon
sew with threads;
fasten with a stapler;
twist with wire.

Straighten the resulting half-loops, give them volume and a beautiful bow is ready!

How to make a fluffy ribbon bow? Video lesson

How to make a simple ribbon bow to decorate a gift?

You can make a strict version for a “male” present. It will look great both on the packaging and on the bottle of an expensive strong drink. And you can read more about souvenirs for the men's holiday in the article:. Let's get to work:

Cut off a piece of wide ribbon of the desired size, fold, glue the edges with glue. Should be a ring.
Flatten the resulting ring.
Hide the joint under the same, but thinner cut.
Gently glue the edges and a strict decoration is ready.

How to make a bow from a ribbon - a classic version

The classic version of the decoration is very simple in execution, while creating an excellent frame for any present.

With such a bow, both a book, a box of chocolates or a service, as well as ordinary ones, will look great. wildflowers. Such a classic is performed according to the following steps:

Take a long ribbon and fold it into two loops, as in the photo below. In each hand, there should be one addition.
The loop that is on the left to start at the back, crossing two additions. It turns out a circle at the bottom.
Pull the right loop through the formed circle, pull it off. The center should be in the middle.
Straighten the loops - a beautiful bow is ready! If necessary, you can cut the lower ends to the desired shape (oblique, triangle, etc.).

Video tutorial: how to tie a classic-style ribbon bow to decorate a gift?

How to make a Dior bow from ribbon for decorating souvenirs?

The Dior bow is used not only in decorating gifts. With it, unforgettable decors for parties, weddings and other celebrations are created. By the way, take note of the rules of conduct at the table at such festivities. They are described in the article:.

To make such a bow, you need to follow these steps:

Prepare four cuts, of different lengths.
Roll each of them into a circle and fix with threads or glue.
Fold the circles in ascending order one on top of the other.
Tie the resulting design of ribbons in the center by inserting the strapping tape into the upper (smallest) circle, as in the photo below.
Attach the structure.

How to make a ribbon bow on a fork?

Do you believe that you can tie a beautiful bow on a fork? No? Then let's learn, we offer to try out two options for the execution of such an ornament.

Option No1

Let's try to solve the following equation: Ribbon + Fork = Original bow. To resolve, you need to do the following:

Cut a narrow ribbon of the desired size. For convenience of work, it should be at least 18 cm.
Conditionally divide it into a long and a short side. The short side will not be used.
Pass the long part between 2-3 cloves of the fork used.
And its end, bring up between the same teeth.
After these steps, you should get a small loop. Don't tighten it just yet.
Pass the rest of the long end through the loop inward again.
Pull this end out and tighten the knot.
Trim the long ends to the desired length, singe them with matches or a lighter.

OptionNo2

To get a beautiful bow in the form of a lush flower, you need to use two different ribbons:

thin;
wide nylon.

Execution steps:

Insert a narrow ribbon crosswise into the center of the fork. It will be needed almost at the end of the work.
Braid the fork teeth with a wide nylon cut, as shown in the photo below.
Pull off the bindings with a thin ribbon, tie.
Remove the workpiece, straighten.
Scorch the edges with fire.

The decoration is delicate. It will ideally complement any souvenir intended for the beautiful half of humanity.

Video tutorial: how to make a ribbon bow on a fork

Photo ideas for decorating gifts with bows

Hair bows can make even the most ordinary hairstyle bright and festive. To make your bow the most original and unusual, you can easily make it at home with your own hands. In fact, making bows is a very entertaining entertainment, as a result of which you are left with amazing elegant accessories for any occasion. It does not take much effort to create a regular model. Even a child can do this. But to make more complex hair ornaments, you will need patience, perseverance and a little knowledge.

QUICK ARTICLE NAVIGATION

Multi-layer ribbon bow

A ready-made multi-layered bow, made by oneself, is no different from its store counterpart. But, creating it at home, you can not limit yourself in the choice color, ornament and the material itself.

To create this variation of the bow, you will need:

trimming the tape of your choice, namely 5 pieces, as shown in the photo;
a hairpin or elastic band that will attach the product to the hair;
thread with a needle;
glue.

At the first stage it is necessary do blanks. It is necessary to bend each of the three ribbons of the same length that were prepared earlier, so that their edges converge in the center, and sew, as shown in the photo.

Two of the three finished petals are connected to each other by squeezing their centers with a thread. Thus, a simple four-petal bow is obtained.

The longest ribbon should be wrapped in such a way that a bow with two loops and two tails is formed. It should be tightly fastened with threads in the middle.

As a result, you should get three blanks: from two loops, from four petals and a bow with ponytails.

All of them are fastened together in the listed sequence with the help of threads and glue for reliability.

To hide the middle sewn with thread, the last and shortest shred is used. They simply wrap the middle of the bow around, and behind the ends of the ribbon sit on the glue.

It remains only to attach with glue to back side products hairpin, let dry and wear with pleasure.

The creation technology is shown in the video:

Spectacular two-tone bow

To create these hair bows you will need:

satin ribbon of medium thickness of the same color;
thin satin ribbon of a different color;
very thin pieces of ribbon of any of two colors;
threads.

When creating bows, it is not necessary to adhere to the colors and materials that are described here. After all, you create a masterpiece with your own hands, so you also choose the style.

From the widest ribbon it should turn out three-layer bow base. To do this, you need to decide on its diameter and begin to evenly wind the tape to get three full turns. Then fasten the middle with a thread. More clearly presented below.

Then you need to move on to creating upper bow. It will consist, as it were, of two layers located on top of each other. We fasten the ends of the ribbons in the middle and tie the two tiers together so that they do not fall apart.

Good mood to all readers of the site. Summer is in full swing and it's time to think about the right accessories and jewelry. Today we will create beautiful lush, I would even say fluffy, do-it-yourself ribbon bows. So, this article will be especially interesting for mothers of girls.

But even if you have a son, then know: if suddenly ... someday ... you need to surprise and please a neighbor girl or nephew with something, then why not try to sew such small bows from nylon ribbons?

Moreover, they are sewn very quickly and simply. And they look very cute and playful. For example, we have already managed to conquer with our bows not only the neighbor boys, but also the girls!

In order to get such fluffy bows, you need to prepare:

nylon tape of the desired shade 8-10 cm wide - 3 meters
small pieces of felt or any other non-woven material of sufficient density.

The main thing is that the material should not crumble and preferably should not stretch. From this point of view, fleece will not be very convenient to use. It does not crumble, but it stretches, and this is not good. But if nothing else is at hand, then you can use it. You can also try using thin, soft leather. Or a piece of felt. Or, at worst, glue an ordinary cotton fabric with PVA glue. In general, there are a lot of options - choose.

Why exactly thin I will explain later. But if you don't read to the end, you can find out for yourself. Especially if, without listening to advice, you take not the needle that I recommend, but the one that has long taken root in your sewing box.

We also need hot melt glue, a lighter, a couple of beads to match the ribbon (preferably with a wider hole so that the elastic goes in) and the hat gum itself, approximately 30-40 cm long. Also in the tone of the ribbon. All. Let's start our master class.

Fluffy ribbon bows with your own hands. Master Class

The first thing to do is to prepare the nylon tape for further work. Iron it on a very, very low temperature with a heated iron to eliminate possible creases, wrinkles and other outrages. The ribbon should be perfectly ironed. I do not recommend using steam, as some tapes may become very waviness or even become stained with moisture as a result of steaming. Therefore - only dry ironing. For fans of steaming, I advise you to try it first on a small area at the edge of the tape.

Next, singe the sections of the tape, nested between the pages of a thick book, with a lighter. If there is a special soldering iron or a burner, then you can process the sections with them. And the method with the book is good because when special devices and tools are not available, you can melt the cuts without fear and reproach, or rather the risk, and not be afraid that the edge will be even worse than before processing. Dense sheets of the book will not allow the flame to spread beyond the prescribed level, and the cut line will turn out to be even and neat.

Now let's start the sewing process. We bend the tape in half and sew with small stitches approximately 0.3-0.5 cm long along the fold line at a distance of 0.3 cm from it. Maybe less, but not very convenient. But it's very beautiful.

I tried to sew at a distance of 0.1 cm. True, it was a little inconvenient to collect later. In general, okay. Section by section, folding the tape in half, we lay the line with a seam “forward the needle”.

Secret No. 1 The tape is better and easier to collect initially on a double thread. So, after threading it into the needle, connect both ends and tie a knot

Well, without going far, secret number 2. Tighten the thread, gathering the tape each time, sewing a small area with straight stitches. Don't wait until you get to the end of the tape. This way you will avoid the possibility of breaking the thread when pulling a long strip of tape, and you will not have to take too long a thread. All these little tricks will help make your ribbon bows even and neat.

Now the most crucial moment. And labor intensive. In principle, nothing complicated, but it will take effort. And… tact. It is necessary to tighten the thread strongly, but at the same time show tact so as not to break it. Otherwise… Uuuuu… even talking is scary.

Your thread will break, and not only will you have to start all over again, including ironing the tape, by the way. So, in addition to everything, you will get a lot of puffs, hooks and holes that you can’t remove in any way, but sew and pull them together again ... Well, in general, of course, you won’t have anything else left, but the quality of the bows is , of course, will not add. In general, we work extremely carefully. Without too much enthusiasm.

So. I digress. After the entire tape has been assembled, we fasten the thread with a few stitches and start beautifully and slowly, twisting the assembled tape in a spiral (starting from the end on which we just finished work), sew the edge assembled into an accordion. It's a little hard to show in the photo, but it seems to be something you can see.

At the same time ... Attention!!! ... we help with our fingers, pulling down the free edge of the tape so that only the stitched edge gets into the spiral. Nuuuu ... if possible, of course.

So let's flash it. In a spiral, turn by turn. Try not to form a hill or something resembling a cone when you pull it together, but to get a flat base. If it doesn't work out, then it's not a big deal. But it's still better if it works. Therefore, connect the turns as if "superficially". In the sense that the stitches should be of high quality, but lie on the surface, and not turn into a dot when tightened. In other words, they must be visible.

If you do everything right, then as a result you should get a not very fluffy and not quite round, and also not at all fluffy, but absolutely crumpled ribbon bow. And so, this is what the output should look like.

This, of course, is not as ideal as I painted for you here and advised you for half an hour, but something like that. We fix the thread. We cut off. We string (in my case - somehow screw) the beads on a rubber cord.

What are beads for? The fact is that their presence on an elastic band greatly simplifies the task of fixing this very elastic band on ponytails and pigtails. This remarkable and, more importantly, useful know-how has long been used with great success in the manufacture of all kinds of hair bands. Well, actually, why am I worse? I, too, now hang beads on all rubber bands. Vot! And by the way, I advise you!

In general, we string beads, then tie a cord into a knot, get a closed ring with a diameter of approximately 5-6 cm and cut off the excess elastic, leaving free ends no more than 0.5 cm long. We melt the braid threads with a lighter.

Sew the elastic to the assembled tape. At the same time, make sure that the stitches are located on top of the rubber cord, otherwise you will injure it, make it unusable. We sew, of course, from the side of the knot. The bead at this moment dangles freely below.

We work, again, with a double thread. 4-6 stitches. 2-3 stitches on each side of the knot. At the same time, try not to grab the tape itself, but work only with the assembly area. Thanks to this, the lower tier of frills will not become shorter and the finished nylon ball, or rather a bow, will be evenly fluffy.

Ready! Finally. It remains to put on a rubber band a circle of felt prepared in advance with a diameter of approximately 2.5 cm with a longitudinal cut for a bead in the center of this circle. The length of the cut is equal to the diameter of the bead or slightly less (by 1 mm). From a technological point of view, the second option is even more correct than the first. I am telling you this as my beloved readers.

After you have threaded the bead and put a circle on the junction of the rubber cord with the bow, you can glue it. You can do this with ordinary transparent Moment Crystal glue, but I prefer the silicone glue gun. A couple of small drops at the base of the gum and thin line around the entire perimeter of the felt circle.

Fluff (or fluff? Who will answer, well done!) our nylon ball and get a wonderful fluffy, bright ribbon bow!!! Beauty! You like? Yes, for me.

As you can see, it’s not at all difficult to sew ribbon bows with your own hands, and most importantly, it doesn’t take long at all. 30-40 minutes and two handsome bantams are ready for trying on and for new hairstyles on your baby's head!

Share the material with friends on social networks, add it to your pages or bookmarks, subscribe to my newsletter with new master classes, patterns, patterns, announcements of contests and other equally interesting handicraft projects and always be positive and creatively purposeful!

Creative success and good mood!

Tatiana

Good day, my dear friends! When the time of the holidays approaches (especially the last calls and September 1), such an item as a ribbon bow becomes especially relevant. This accessory is so popular with schoolchildren, mothers and just needlewomen that I could not get around it and decided to dedicate a whole post to bows.

All sorts of bows are actually found in our lives so often that we don’t even notice it - in jewelry, clothes, they are even used as an element school uniform... In general, if you want to learn how to make bows from a variety of types of ribbons, then welcome!

Beautiful do-it-yourself ribbon bows: master classes

In fact, learning how to tie even the most complex bows yourself is not so difficult. Instructions for this will help big amount photos, which today I have prepared for you in abundance. There will be both selections from the Internet and unique master classes specially prepared for you.

How to make satin ribbon bows: step by step instructions

Satin ribbons are the most popular material for creating small masterpieces. Smooth, shiny, relatively inexpensive ribbons have always attracted the attention of needlewomen from all over the world. The material has found application in various fields of creativity, not an exception for steel and decorations based on various kinds of bows.

To create accessories, you can use ribbons of different widths, but it all depends on the chosen design and execution technique. Let's start with the simplest types.

The simplest classic bow

A basic bow that any beginner should learn to make is shown below. For him, you can take both a narrow and a very wide tape - it will turn out from any.

Work process:

Fold the ribbon over the two halves of the ribbon over the index fingers of both hands.
Cross the halves and slip one into the other.
Tighten the product. Ready!

Based on such a bow, you can make chic decoration. It will be enough just to fill it with waterproof glue or shiny acrylic varnish, then attach the rings to which the chain will be fastened.

It will not be difficult to tie the same bow on a fork, with its help it will turn out to be more accurate and even (although you can create very beautiful accessory). There is also a limitation for such an “assistant” - it is useful only when creating very small bows, for larger products you will have to resort to the traditional method.

double tape

The double bow is performed in a slightly different way from the previous one. Two rings of tape and a separately created center, obtained by sealing the edges, are useful for it.

Fold two rings in the middle and sew or glue so that they are in contact with the side parts. After that, the middle is closed with a pre-made part. The design can be attached to a hairpin or elastic band.

Note!

For this accessory, you need to take a medium or wide ribbon; such beauty will not come out of a thin, narrow material. If your choice goes to a width of 2.5-5 cm, then this will be the ideal solution.

A variation of such a bow of two ribbons can be such an analogue: in this case, two rings are superimposed in the middle on each other. You can also experiment with colors - for example, create a red or green bow, or even combine one or more shades in one product.

Try to make more than two layers, take ribbons of different widths and textures. Thus, from one scheme for creating a bow, you can create a wide variety of accessories.

Layered puffy bow

A great option for schoolgirls and not only. Such a bow is easy to put on a hairpin or comb to attach to your hair. It is based on two simple bows discussed earlier.

To fold this, you will need to make a base of two overlapping layers. From the ribbons folded in this way, you get rear end. The front is similar to the simplest first bow. At the end, they must be connected with glue or thread. Everything is held together by a central piece.

In this way, you can get more voluminous accessories, like the white bow below. There is one difference here - the basis is not two layers, but three.

Romantic and sophisticated, this addition to the image will please any graduate who wants to indulge in nostalgia. But this option, unlike jewelry for girls, is more adult and feminine, and this is exactly what is needed in such cases.

Twisted bow of 3-4 ribbons

Very beautiful bow, which is well suited for decoration on the head. To do this, three or four (or even more) pieces of tape of the same width, but different lengths you need to sew with the sign of infinity and put one into the other. Draw the middle as in a few microns earlier.

Kanzashi

Many beautiful bows are made using the kanzashi technique. This type of creativity came, as you might guess, from distant Japan. There, in this way, magnificent details are created to complement not only everyday, but also festive outfits.

Bow flower

Making such a flower is not difficult, but painstaking. You will need at least 12 petals, which will need to be pre-cut from a ribbon 2 and 4 cm wide (you can take a different width, but not less than 1.5 cm).

First, make the first layer by stringing six wide petals and pulling them together. Put some kind of decoration between the layers and attach the second layer made in the same way. Don't forget the bead in the middle.

Another variation of simple but beautiful petals is located below. Here the flowers come out more pointed.

A more elegant white flower is created below. IN step by step photos you can see that the flower petals are made by twisting the ends inside the middle. Such a bow can consist of either a pair or five or six layers gradually increasing in number of elements.

Bow for discharge from the hospital

Newborns (and children in general) deserve the best! That is why I have found for you a beautiful bow that will suit both girls and boys. For it, you will need a sufficiently long tape (at least three meters).

In the middle, make a winding of several layers and then a knot as in the photo. After that, you will need to pull out a few petals formed by previously folded rings.

Why leave such long ends around the edges? The fact is that you will need to tie them around the long-awaited bundle, leaving a beautiful center in front. At one time, I generally purchased a five-meter ribbon - the nurse imposed such beauty from it that we still remember with a smile with the whole family.

How to tie a ribbon bow

Rep ribbon is good because, unlike satin, it is less prone to various kinds of damage. Satin should only be hooked once and that's it - appearance bow is damaged. With reps, such a trick will not work, but it also costs more.

Baby bows

The combination of several types of tapes looks very interesting. In this case, colors are also combined, which, nevertheless, look very organic. The polka dot ribbon is just perfect! Such a bow will decorate the girl's head for a holiday and in Everyday life. For him, you will need to connect two tucked parts, as was seen earlier in the master classes. The top will be decorated with a classic variation.

On an elastic band

Collecting a magnificent bow on an elastic band is not difficult. To do this, you will need several layers of bows, decorated as we did earlier. The number of layers is limited only by your imagination and common sense. The difference of this accessory is that under it there is a semblance of crosses with serifs at the ends.

You can connect all this splendor with ribbons 1 cm wide, bandaging the middle. You can attach a bow to the elastic with a glue gun or something similar.

A bright bow with a school theme explodes early representations about what a school accessory should be. It's just a bomb!

Butterfly bow

With the help of rep ribbons, you can even make a semblance of a tie! Yes, the butterfly will turn out small, but very effective. To create it, fold the ribbon, bending the edges under each other, as in the photo below. You will need three of these layers. Under them, attach a longer ribbon so that you can tie it at the back. In MK it is very short, in this form it can be left for a simple accessory.

And here is another fun variation of a bow tie. Nothing more or less bird feathers are used here, connected by a ribbon in the middle. An interesting interpretation of the standard butterfly, isn't it?

By the way, a butterfly bow can also be made from fabric, a master class on this below.

Bows for gift boxes

To tie a bow on gift box you will need not only tape, but also different types of wrapping paper.

big bow

A very large accessory for a very large gift. Such a bow can be made from a ribbon, but it is better to use wrapping paper, which will take a lot for such a work.

Insert a small box into the base of the decorative element. It may be a surprise or it may just be the basis for such an accessory. Place it in the center of the square, which close its edges at the top and bottom. Tuck the free edges as in the photo below (as if wrapping an envelope). Press the middle and wrap it with a small piece of paper of sufficient length. Straighten the edges to make them as fluffy as possible.

This bow can be used on its own or as a decorative piece for a huge surprise.

Beautiful for a gift

The next fluffy bow has an incredible Christmas mood. They literally breathe from him! For this, you will need to fold the ribbon as shown below, overlapping and tying several layers together.

Place a few bows on top of the structure, folded as shown below. Decorate the middle with a beautiful bear in a cap or any other decorative element.

Paper bows: simple, cheap, original. All master classes describe their creation in great detail.

Do you want even more bows for a gift? Read about it in another article.

Nylon bows

Nylon ribbon is traditionally used for graduates and hair decoration. But for other purposes, such bows can be used.

A simple bow on a fork is created in just a couple of minutes. To do this, you take a fork, thread a thin ribbon in the middle, thicker on top of it. Wrap the thicker ribbon around the tines of the fork many times, forming a braid. A thinner ribbon becomes the central part of such a flower.

A semicircular metal template will help to “cut” the petals with a small resemblance of a soldering iron. To do this, two ribbons - nylon and satin - must be folded as shown below. After that, the middle is bent inward and you will need a lot of such petals. They merge into one layer, then another, and so on, until you get a fluffy layered bow that can be used to decorate hair.

In the next accessory, nylon ribbon is used only as an additional accessory, decorating the base made of fabric. You can create such beauty in a few minutes, and decorated with a nylon ribbon, it will look even richer.

The next bow belongs to the gift category, but I decided to put it in this section, because it is made of nylon ribbon. For it, you will need to fold the tape in many layers, and make an incision in the middle, which will need to be tied with a thin fishing line, around which the ends should be tied. The most important step is coming: you need to pull out all the ends of the folded tape to get a very magnificent design.

Such a bow will decorate a Christmas tree or simply decorate an apartment.

A similar accessory can be made from a denser ribbon and even from burlap. It will be more difficult to pull out the ends, but the effect will turn out to be more unexpected and extraordinary.

Photos of other beautiful bows

How are they not made out! In the form of elegant brooches, bracelets and much more. For example, the accessory below will be an interesting addition to a festive outfit.

Another lace bow with a bead inside.

In general, thanks to lace, even the simplest design begins to look more original and festive.

Just look how you can decorate your pen by adding several layers of lace to it and satin ribbons.

A bow on the rim will turn an ordinary girl into a doll hurrying to the ball.

Roses as bows. Great, isn't it?

The bow on the dress looks very impressive and original.

Sincerely, Anastasia Skoreva

Here is a photo that shows a variety of methods for creating simple ribbon bows by hand.

How to make a simple bow?

The most unpretentious bow can be made independently as follows:

Before starting work, prepare two ribbons (wide and narrow) of different colors. The length and width of the light ribbon is 20x5cm, the dark one is 40x5cm, respectively.
Next, fold a wide ribbon in the form of a loop and fasten the edges with glue.
Repeat the same with a narrow tape. To do this, you need to put it wide on top, and fasten the ends of one and the other to each other with glue.
Take the remaining piece of a narrow ribbon and tie loosely in the middle of the resulting product.
Free edges allow you to attach a bow to a gift or clothes

How to make a fluffy ribbon bow

There are many variations on this theme. Here is one simple way satin bow at home:

Purchase a ribbon of the desired length and width from the store. The longer it is, the more magnificent the product will turn out.
Fold the ribbon like an accordion, tie the part in the middle with a thread.
To make a large satin ribbon bow, use several of these elements connected to each other.

Lovely bow in kindergarten or on September 1, it is easy for first-graders to create using a two-meter white ribbon.

To do this, perform the following steps:

Prepare several segments of equal length (15 cm).
Lay them face down inward.
At a distance of 2 cm from the bend, glue is applied.
The place of gluing is pressed with tweezers for strength.
After the glue dries, the bows can be turned inside out.
The edges are fastened with a thread and sewn to the base (felt, cloth).
As an additional decoration, rhinestones and beads are suitable.

Bows from wide ribbons

Often, when choosing a bow tie, difficulties arise, since the store does not always have a model of the desired color.

A worthy solution to this problem will be the manufacture of such a tie from improvised materials. Here is a short guide:

Prepare 2 pieces of tape of different lengths and widths: the first - 20x5, the second -18x3
Fold each of them in half, securing the ends with glue
For strong bonding, it is recommended to use a needle
Connect both parts with stitches
Pull the thread and fasten

“Roses” are considered an original decoration - beautiful bows with their own hands.

Creation proceeds as follows:

Wrap the tape around your hand, make a knot
Spread the "petals", bending them inward
Repeat the action with each "petal"

Narrow satin ribbon bow

Sophistication and charm to your clothes will be added by the Dior decor element. It is not difficult to make a kind of bow:

Cut out elements of various lengths from the tape
Make them into figure-eight coils.
Lay them on top of each other from largest to smallest
Fasten the bow - for this you need to thread a small piece of ribbon of the same shade into the last turn

The finished product will fit any packaging box, it will be especially stylish in combination with a round and oval shape.

The following video will visually present a master class on how to make many small bows from a narrow ribbon using a table fork.

Hair ornaments

Handmade hair bows will be a great way to stand out. To do this, follow these points:

Take 2 pieces of tape (5x25) and a thin tape
Bend the corner at one end of the wide tape
Align the end of the second corner with the first
Connect the resulting corners with a needle to form a coil
Then do the same for the corners. Turning the product over, make another corner (perform these steps until the ribbon triangle remains)
The resulting "diamond" bend twice in half
Fold the free end to form a triangle.
Gently hold it in the center so that the structure does not fall apart
Remove the needles and fold over the inner triangle to create a petal
Sew the element in the middle

After that, you should prepare another such part and connect both using a narrow tape. To attach the products to the hair, you will need a clip or elastic band.

How to make a chic bow from nylon ribbon

To process home needlework was not too time-consuming, it is enough to follow the step-by-step actions:

You will need 2 tapes the same size(150x8)
Bend each in half and try to string it on a needle and thread
After finishing work, pull the thread so that the remaining piece of tape is 30-40cm
Make a knot and straighten the resulting product
Take a thick felt and prepare a circle (diameter 8cm)
Make two holes in it and thread a thin ribbon through them
Glue the first tape to the base in a spiral, then the second.
Cut off the rest of the tape, and process the ends