Handmade mink earrings. Original handmade leather jewelry

Most girls prefer jewelry made of precious metals, but by no means refuse jewelry made of natural materials- stone, leather, fur. Earrings with stone beads and fur look stylish with almost any outfit. The technology of their manufacture is simple. Not only young people can cope with it, making original ones for girls, but also the fair sex.

The following tool will be needed for work:

ruler;
awl;
comb;
pencil;
small round pliers;
small pliers;
transparent glue "Moment-Crystal";
blade knife;
scissors.

The material used is:

dyed fox fur with long hair;
2 bowl-holders with a radius of 0.9 cm, a height of 1.6-2 cm;
4 bowl-holders for beads with a radius of 0.3 cm, a height of 0.8 cm;
2 beads made of stone in the color of fur with a radius of 0.7 cm;
shvemza - 2;
pin - 4 by 3.5-4 cm long;
fur threads.

Progress.

1. Take a piece of fur and prepare it for work.

Comb the skin, find the softest, not overdried part of the skin, determine the direction of the pile. The hair on the skin in the earrings should go from top to bottom. Mark on the skin 2 rectangles 1.5x4-5 cm. Blanks for earrings are cut with a blade from the side of the skin. The fur on the cut on the opposite side is fully extended. After cutting, the skin on the blanks is scraped with a blade for evenness. The cuts are scraped off with a blade.

2. Rectangles on the skin side are glued and tightly wound into rollers. From above, the roller is wrapped with a thread. The thread is coated with glue.

3. When the part dries, the roller is vertically pierced through with an awl.

4. A pin is inserted into the hole from the fur side. A bowl-holder with a radius of 0.9 cm is put on its tip.

For soft filler (leather, fur, fabric, knitwear), it is better to use hard bowls.

5. The excess pin is cut off with the cutting side of the pliers.

The rest of the pin 0.5 cm long should come out of the bowl.

6. At the tip of the chopped pin, a ring with a connector is made with round-nose pliers.

7. The second half of the earrings. Put a bowl-holder with a radius of 0.3 cm, a bead and another similar bowl on the pin so that they wrap around the bead.

For a hard filler (metal, stone), soft bowls are good, changing shape due to their openwork.

8. With a cutting sidewall, pliers should cut off the tip of the pin with a remainder of 0.5 cm.

10. Using split rings, connect 2 parts with a bead and fur.

The result was a design with the first mobility. These earrings will fit better around the neck.

11. A shvemza is attached to the structure using detachable rings.

They will give the earrings a second mobility.

12. If the skin is sensitive to base metals, it is better to use silver shvemza.

13. For strength, the rings on the earrings can be carefully tightened.

14. Earrings with stone and fur are ready.

15. It is advisable to protect such earrings from moths. Sometimes they need to be carefully combed and styled with hairspray.

Earrings with pieces of fur can add a little charming wildness to you and complement the ethnic look. They are very easy to make. They are very light and do not pull the ear, and when the wind blows, they tickle the neck a little.

To make these earrings with your own hands, we need:

a small piece of long-haired fur, natural or artificial
a small piece of leather, also natural or artificial
four beads, a smaller pair and a larger pair (I usually use wooden ones)
fasteners
sewing needle and thread to match the fur
universal glue
pen
ruler
scissors
blade (you can also use a sharp clerical knife).

How to make earrings with your own hands

First, take a piece of fur, turn it upside down. We draw two rectangles, about one and a half centimeters wide and two long.

Be careful, you need to correctly orient these rectangles. As a rule, the fur pile is directed in one direction, and their long side is located along this direction.

Carefully cut out the marked rectangles with a blade. To do this, stretch the fur a little with your fingers and draw the blade along the marking line several times, trying to cut the skin, but not damage the pile itself.

Now we take a piece of leather and cut off two narrow strips from it, no more than two millimeters wide. The length of the strips can be calculated as follows: to the length of a large bead, add the length of a small bead and another one and a half centimeters, and then multiply the whole amount by two.

We cut the thread, about 40 cm, fold it in half and thread the ends into the eye of the needle, a loop should form at the end.

We hook the thread in the middle of the leather strip: we thread the needle into the loop and tighten it.

And now we can easily thread our leather strip through the beads. We string on a needle first a large bead, then a small one.

We shift the beads down the thread, and then along the leather strip. It is necessary to make sure that a very small leather loop, about 3 mm, peeks out of a small bead.

We unhook the thread, now you can put the fastener. We open the ring on the fastener and thread it through a leather loop, then close it. Usually earwires are very soft, and to open and close the ring, it is enough to press on it with the end of the scissors. But if you suddenly come across tough and stubborn, deal with them with pliers.

We do the same with a leather strip, beads and fasteners again. And now we have two blanks and two pieces of fur, it's time to connect them. We grease the tails that stick out of the beads with glue and apply the bead to the fur, approximately in the middle, close to the upper edge.
Here, too, you need to be more careful: the top and bottom are determined relative to the direction of the pile, take a look at the photo below.

We are waiting for the glue to dry, and then we will sew our piece of fur. We cut the thread about 40 cm long, thread it into the needle, knit a knot at the end. We pierce the lower corner of the fur close to the edge, the knot remains inside.

We pierce the opposite corner, the thread goes from the inside out, as in lacing.

We tighten the thread and continue to “lace up” with small stitches. The main thing is to cling the fur to the very edge so that the thread is not visible later.

When we reach the top edge, we make a knot and hide the thread in a bead, then it can be cut off.

We repeat the same operations with the second earring. Now they look almost ready, the finishing touch remains. Cut off a leather strip about half a centimeter wide.

Lubricate the strip with glue and make two turns around the fur, right under the bead. Cut off, carefully glue the very tip.

Everything, our pussies are ready. Protect them from water and dust, if they suddenly hesitate - comb them with a frequent brush. And most importantly, wear it with pleasure!

The wooden jewelry set looks pretty nice

Every girl deserves royal jewelry. This is not about expensive jewelry, but about magnificent jewelry created by the skillful hands of craftswomen. It is beautiful, stylish, original jewelry with your own hands that gives zest fashionable image, effectively emphasizes it. Exclusive earrings, necklaces, bracelets hand made they will be able to tell without words about the extraordinary personality of the hostess, about her excellent taste and individual perception of beauty. Fantasy and creativity are important in the art of creating accessories. Let her boldly roam, as they say, to the fullest, and incredibly fashionable man-made masterpieces will make your look bright, stylish and individual.

Beautiful handmade accessories are not at all bad taste or a sign of lack of money. On the contrary, such jewelry demonstrates good taste, an original look at modern fashion and a sense of style. It is precisely these valuable qualities that eminent fashion designers who have achieved stunning success in the fashion world arena have.

Decorations of various styles

Do you want to know how to make luxury accessory and feel like a creative designer? It is enough to know a few secrets and learn how to make jewelry with your own hands at master classes, which experienced needlewomen share with pleasure. In addition, the creation of jewelry at home is quite a lucrative activity. Before proceeding to practical exercises, you need a little theory.

Classic style. Classics can be manifested in the conciseness of forms, color combinations, choice of materials. Earrings, bracelets, necklaces made of stones, beads, beads and other materials in this style are distinguished by their versatility, they can be safely worn both at business meetings or work in the office, and at social events.
Trendy style. This category of jewelry is distinguished by creativity, extravagance and originality. The style manifests itself in contrasting color combinations, an unusual synthesis of materials, and manufacturing technologies. It all depends on trends, and, as you know, fashion can surprise. It can be jewelry made of wood, feathers and beads, metal and any kind of textiles.
Vanguard style. Asymmetry, unconventional combination of materials, originality in every detail. Such do-it-yourself wood, metal or textile decorations will harmoniously complement, for example, an eccentric steampunk. Taking a fresh look at centuries-old traditions, you can make ethnic jewelry with your own hands in an avant-garde style.

Making jewelry with your own hands is not an easy, but very exciting activity. We offer for beginners a few interesting micros to create original and original jewelry with their own hands.

Basic styles, rules for choosing and wearing

Earrings with fur tassels

Fur has long been used not only for tailoring warm coat. Do not rush to throw away shreds of fur. We offer a simple and interesting MK for the manufacture of original earrings. Earrings will be light, unusual and exotic. To make jewelry, you will need two small pieces of fur, wooden beads, a small piece of brown genuine leather and earwires, which can be bought at a jewelry store.

From the remnants of fur, you can create such wonderful earrings.

The algorithm is the following:

We take a piece of fur, put it with the pile down and draw two rectangles of 1.5-2 cm. Cut out the lined patterns carefully with a blade so as not to damage the fluffy pile.
From a flap of skin we cut off two thin strips a couple of millimeters wide.
We thread a strong thread 40 cm long into the needle, fold the strip of leather in half and sew at the base. We string the beads with a needle and a leather cord so that the tails peek out of the hole by about 3 cm.
We put a fastener on a leather loop and securely fasten the ring. We perform similar manipulations with the second workpiece.
It's time to connect the base of the earrings with the fur patch. To do this, we apply glue to the smooth side, apply tails that freely peek out of the bead, exactly in the middle.
When the glue has dried, we sew a piece of fur from opposite sides, as if lacing the edges. The main thing is to link a piece of fur along the very edge so that the thread is not visible. The knot can be hidden in a bead, and the thread can be carefully cut.
Right under the bead, wrap the fur with a strip of leather, wrapping it twice, and glue the end.

Stylish fluffy decoration is ready. To fluff up the fur, brush the pile a couple of times in a downward direction. These earrings can perfectly complement the look in boho-chic style, bring an ethnic zest.

Earrings with fur do it yourself

Soutache earrings

Soutache earrings are trendy jewelry that perfectly emphasizes the evening look. Many Hollywood divas walk the red carpet in these earrings. Do you want to look like a celebrity?

Variety of soutache earrings

We offer a simple master class on jewelry with your own hands. To work, you need to stock up on accessories. You will need beads, rondel beads, drop beads, earwires, soutache cord (black and with gold lurex) and black brushes.

Do-it-yourself jewelry assembly occurs according to the following principle:

The first step is to make a hat. We take white beads, string it on a white thread. We begin to form a hat. We make the first stitch between two cords, hiding the knot inside. We bring the thread through the golden soutache, add a bead, and make a stitch through two cords. Similarly, we add beads one by one, in total we get 6 beads braided with a soutache cord. We form a hat, but do not close the cap. To prevent the soutache thread from unraveling in the process, you can singe the ends with a lighter.
At the second stage, we fasten the fringe brush inside the cap, glue or sew it inside, and then close the cap.
We sew rondels to the base, tighten a little to give a domed shape. We braid the base in the form of a mesh with black beads.
We put on stitches. You can thread the ring through and attach it directly to the hat, or you can lengthen the earrings a little and make a beautiful upper part. We braid rondels-drops with a soutache cord, and decorate the reverse side with a piece of genuine leather.

Elegant soutache earrings are ready. You can create a whole festive jewelry set by making not only earrings, but also a ring and a necklace.

Making soutache earrings

Tiered beads in ethnic style

Ethnic is an amazing original style that is used, among other things, in the manufacture of jewelry. Ethnic accessories will decorate any look in an original way, but they will especially harmoniously complement hippie, boho and even military style outfits. Ethnics is not only wooden jewelry, as is commonly believed. These are earrings, beads, necklaces and bracelets made of stones, textiles, leather, silver and brass. We offer you to make a luxurious necklace with your own hands, consisting of several tiers.

Very stylish and at the same time simple beads in ethnic style

To work, you will need several brass medallions that you can buy at the hardware store, ceramic beads with various patterns, agate and carnelian beads, wooden round beads, and a brass lock. The more interesting the texture of the beads, the corrugated pattern or embossing, the more original and original the necklace will turn out to be. To assemble the jewelry, you need a thick brass-colored wire, a strong cotton cord and connecting rings to match the decorative elements. Of the tools, round-nose pliers and wire cutters are useful.

Let's start assembling:

First, it is important to determine the order of the beads and elements, the number of tiers and the length of the beads. Since all the elements are of different shades, you can arrange them in a certain order so that the shape, color and size of all elements harmoniously interspersed. We measure the distance by placing the thread between two brass medallions.
When the assembly sketch is ready, you can bring the masterpiece to life. First, prepare the medallions. We fasten one ring on one side, and three on the bottom. The number of lower fasteners is equal to the number of tiers of beads.
We tie a cotton cord to the rings, with the help of round-nose pliers we gird ourselves with several turns of wire. Then we string the elements in order of priority. Similarly, we do all the other tiers.
Let's do the top part of the necklace. We determine its length, tie a cord, string beads on it and fix one part of the lock. Repeat the same on the other side.

Authentic, original, stylish beads in ethno style are ready. They look great with not only light summer sundress, jeans and a cowboy shirt. A beautiful necklace will unobtrusively dilute an office outfit and will appeal to self-confident business ladies.

Tiered beads in ethnic style

Spectacular button ring

A stylish ring can be made from the simplest materials, such as buttons. For craftswomen, the button department is a real paradise, a flight of fancy in needlework.

Beautiful ring with a button on a metal base

Buttons decorate clothes, accessories, shoes, make unusual decorations. You can make a button ring very quickly. To do this, we take the basis for the rings, you can buy it at any jewelry accessories store. The button in our case will replace gem and in a completely new way. We simply glue a beautiful button to the metal base, and the ring is ready! To give a touch of sophistication, you can make a button edging from beads, glue beads into the middle.

In this ring, the base is made of beads.

The world of creativity is full of surprises. Do not rush to spend money and buy jewelry in stores. Using the example of master classes, you can learn how to make a luxurious and original decoration with your own hands from the simplest materials.

Vintage button ring

cat button ring

Fur decorations: best ideas fur jewelry Beautiful natural fur with a soft and delicate pile has always been a symbol of prosperity and well-being - it is no coincidence that a stylish fur coat remains the ultimate dream of many women. Original and stylish fur jewelry can be put on a par with trendy accessories - albeit not with expensive “jewelry”, but at least with high-quality jewelry. The demand for them is seasonal - it is clear that they are best combined with warm clothes for the autumn-winter season. Fur decorations are closely connected not only with modern fashion trends, but also with Russian folk culture, which is more than one thousand years old. In the old days, residents of some regions of Central Russia wore the so-called "guns" - long earrings or pendants attached to headdresses, with round fur pompoms at the ends. The tails of fur-bearing animals could also serve as accessories - they trimmed bags, hats, necklaces, and so on. Varieties of fur ornaments In the 21st century, it is unlikely that anyone would seriously adorn themselves with a rabbit's foot or a squirrel's tail. Fairly high aesthetic requirements are imposed on fur jewelry: ideally, they should look so that associations with the animal world remain at a minimum. A variety of popular fur ornaments are boas - they sometimes look like decorative scarves or collars. It was they who became a source of inspiration for designers who began to create beads, necklaces, necklaces and pendants from the fur texture. A brooch made from pieces of artificial or natural fur today, perhaps, will not surprise anyone, but earrings or a bracelet made of the same material can make a splash. Finally, such an unusual thing as fur belts appeared in the women's wardrobe. Stylish little thing - a brooch made of fur Even a beginner needlewoman can make such a "bauble". Even small pieces of fur lying around somewhere in the home bins will do. Beautiful and elegant brooches are obtained from the fur of mink, arctic fox, sable, nutria, onadtra, fox, beaver. They all have pile different lengths, and this difference can be skillfully beaten: for example, create a brooch in the form of a flower with “motley” petals. Flowers look spectacular, the petals of which are arranged in 2-3 tiers. You can add and “revive” the product with pieces of felt, leather, beautiful beads, beads, small metal fittings. With what and how to wear: on hats, on collars fashion coats 2013, on knitted and fur scarves, leather coats and jackets, turtleneck sweaters, laconic sheath dresses, on bags - especially fur ones. Fur bracelets The basis of such homemade jewelry is most often a ring cut from ordinary plastic bottle for drinking water. How to arrange it, you will be prompted by a rich imagination. For example, you can cut strips of fur of different colors and wrap them around a bracelet, alternating shades according to the principle of contrast. You can wrap the bracelet with faux fur with animal print - leopard, tiger or "a la zebra": it will turn out simple, spectacular and exotic. A few more offhand ideas - try combining fur with denim, leather appliqués, metal chains and studs, large crystals or cabochons. With what and how to wear: with any dark clothes that have long and tight sleeves - turtlenecks, jumpers, tight dresses. Fur earrings Earrings made of fur look best when they have an elongated, oblong shape. One of the most common models is “pendants” made of metal chains with fluffy balls at the ends. Sometimes large clip-on earrings are decorated with fur, sometimes they are covered with earrings that have the shape of large rings. A bold decision is neat fur pendants that can be attached to ear cuffs. With what and how to wear: with short haircuts, strict styling or, on the contrary, with loose shoulders long curls- it all depends on the type of person. Necklaces, necklaces, beads and pendants made of fur Which of the creative needlewomen first guessed to use balls made from circles of fur in the design of beads and necklaces is no longer clear. Yes, it's not that important. The main thing is that fur jewelry this type found their fans. It turned out that soft fleecy beads go well with any other details - beads made of wood and glass, plastic, etc. The concept of some necklaces is that they are based on a fur ribbon - it is located around the neck and is equipped with metal locks at the ends, and strings of glass or plastic beads are wrapped around it. With what and how to wear: with tight turtlenecks and tops that have a high collar adjacent to the neck. Decorative belt made of fur This thing will allow you to combine the useful with the pleasant - it will add trendy notes to the image, and protect your lower back from colds. Decorative fur belts 2013 are often wide and are equipped with leather inserts - the latter are very convenient for attaching fasteners. There are models of corset belts that emphasize a thin waist, as well as options designed to be worn on the hips. With what and how to wear: with leather coats and waistcoats, sheath dresses and pencil skirts made of dense woolen fabric, with jeans, leather trousers and leggings.

These earrings will certainly be a hit of the season, because the combination of ethno beads and fur is always in trend. These handmade earrings are suitable for fur vest, little black dress, fur coat. Now even the summer wardrobe is diluted with accessories with fur. So, in order not to be left without a fashion accessory, it is worth spending 30 minutes of your time and making earrings out of fur and beads.

We make fur earrings with our own hands: a master class

Making earrings will require the following materials:
- a thin strip of mink fur;
- two ethno-beads in the form of rings;
- two beads of bright color with a ribbed surface;
- two pieces of wire 1.5 cm each for fixing the fur mug;
- two earplugs;
- platypuses or round-nose pliers;
- a thread;
- the needle is thin.

Hand-made earrings with fur are made in this way:

1. We turn the strip of mink so that we get a circle. We begin to carefully make stitches to form this circle. A thread with a thin needle is perfect for this.

2. We cut off the strip where it seems to us that an extra piece of fur already begins.