The problem of rapid discharge of Android mobile devices is a "disease" faced by many consumers. There are many reasons for the rapid discharge due to the specifics of the platform. How to quickly charge an Android phone and what problems are typical for batteries - find out from this article.
It is also worth turning on the power saving mode while your smartphone is charging. This will help save power while your smartphone is charging at the cost of slowing down system performance as well as other behind-the-scenes resources. In general, you can charge your smartphone faster. By following the guidelines and steps outlined above, you should hopefully never run out of juice before leaving home for work or some other event. However, some of these ways to boost your charge won't work if you have an aging or damaged battery.
How to properly charge a new or used phone for the first time if the socket is broken? What should I do if the battery power fluctuates and does not fully charge? What programs and applications can be used to save, control and optimize the charge on Asus Zenfon Max or other phones? How to find out the capacity and how to check the battery status?
Lithium-ion batteries are found in most of our smartphones and while they are much better than other solutions, the battery type is still subject to aging. In some smartphones, the deterioration of lithium-ion capacity can be noticeable in as little as one year. It costs nothing that they can completely fail in two or three years. However, it may be worth buying a new battery if your smartphone has a removable one. If your smartphone has a non-removable battery, it's best to check your warranty, as you can - most of the time - get a replacement smartphone.
To begin with, we will analyze the causes and methods for their elimination:
- High settings for the brightness of the screen of the mobile device. A display set to 80-100% brightness will quickly drain your mobile. For optimal performance, 50% brightness is usually sufficient. To fix the problem, you need to change the brightness level in the Settings menu by going to the Display section. Adjust the brightness to your needs, if possible, set the automatic option to adjust the brightness according to the ambient light.
Mobile devices have additional options for automatically rotating the screen or smart waiting when the display remains active while the user is looking at it. These options affect battery life and should therefore be disabled. - Use of unnecessary modules and services. If the Wi-Fi, Bluetooth, 3G, GPRS and other options are used unnecessarily, it will drain the battery. Functions, although not much, but they drain the battery, and if they are used constantly, then the battery is discharged quickly. To fix the problem, simply disable the options.
- The GPS option can be turned on without the user's knowledge, in particular, if the geolocation function is activated, which is used in the operation of the camera. Turn off GPS and geolocation to prevent discharge.
- Usage mobile applications and games at high settings, especially 3D games that run for at least half an hour. How to save the charge of a tablet or smartphone and how to make the battery last longer? Do not run applications and games for a long time, if possible, reduce the graphics settings. This will not affect the quality gameplay, but will significantly reduce the load on the battery.
- If the charge drops sharply, this is often associated with regular reboots of the mobile device. You should not do this without the need, restart the phone when the gadget requires it.
- If the device incorrectly shows the charge, the battery discharges too quickly or it does not charge at all, then it is useless to think about how to calibrate and how to keep the device alive. If the symptoms are accompanied by swelling of the battery, this indicates that the battery life has been exhausted and it needs to be changed. Swollen batteries cannot be used or repaired.
The best power source for fast smartphone charging
What methods do you use to increase the charging speed on your smartphone? Just got home, you should be back soon. So quickly charge your phone for a while. First of all, it is important when you are charging your phone. But this can take a long time, because at least three times as many amps are being transferred through the socket. In this regard, the store also goes much faster.
They are available in different versions with completely different load capacities. Some are little more than cigars, slip easily into a jacket pocket, and are now given out as advertising media. The performance of these devices is quite low, but the capacity is usually sufficient to charge a smartphone. Charging takes two to three hours. The included power supply doesn't have to be the best. You can also easily use power supplies from other manufacturers. The differences in charging times are somewhat serious: you can charge your phone with the appropriate charging cable in more than twice as fast.
1. Checking the condition of the mobile battery
2. Shutdown Wi-Fi modules and Bluetooth
3. Decrease brightness and turn off auto-rotate
Solving the problem of fast charge consumption
How to properly charge your phone, how to charge your smartphone faster without charging? How to reduce the discharge? Read more about how to overclock and how to increase battery life, read below.
However, there are no fundamental recommendations for a specific power source. Fear caused by Charger another cell phone manufacturer or battery destroyed is unreasonable. Charging electronics used in smartphones and other mobile devices controls how much current flows at that time during the charging process to protect the device from overheating or overheating. You should also pay attention to the length and quality of the charging cable. Non-titan cables are often low grade copper and therefore transmit less power.
- For proper operation, charge with the power supply that came with the phone. If the phone is designed to charge with a current of 1 ampere, then using a 1.5 ampere charger will damage the battery faster.
- When faced with a problem, check for updates for operating system and phone programs and applications. Update the system. If there are errors in the platform, try restoring the phone to factory default settings.
- Do not keep your mobile gadget on charge longer than necessary. When the battery is charged, unplug it.
- Before charging your mobile device, do not turn it off. The battery is put on charge when the smartphone or tablet is turned on (video filmed and published by the Niksilon channel).
A shorter cable less than half a meter long can result in a lower recharge time if the electrical resistance is lower. This, however, always depends on the respective cable and also on the mobile phone. If the terminal cannot record this extra power, a shorter cable is of no benefit. Here it is: try it!
Fast charger - fast payment for mobile phone
Mobile phone chargers can be used to charge your mobile phone as quickly as possible. As a rule, smartphones are loaded with constant current and voltage. With version 0, four times faster loading times can be achieved compared to a charging process without fast charging. According to the manufacturer, charging time is reduced from 80% to 80%, from 35% to 80%. Depending on the device and battery condition, a smartphone typically requires two hours or more for that power.
We have already reported on how to reduce the discharge - for this it is desirable to reduce the brightness of the display and lower the application settings.
How to swing the battery in mobile device and how to extend its service life:
- When charging your mobile device, activate Airplane mode. This will save up to a third of the time required for recharging. When this mode is activated, the smartphone will not waste its charge on the operation of the Wi-Fi adapter, the search for mobile communications, and these functions consume quite a lot of energy. When the phone is in Airplane mode, the user will not be able to talk on the phone with other parties, send messages, or use the Internet.
- As we have already reported, the charging time should not be increased. When the mobile gadget is charged up to 100%, the phone's battery will begin to lose capacity, although not much. Therefore, at night, before going to bed, you should not put your smartphone on charge.
- Completely discharge the battery periodically, at least once a month. This means that the smartphone must be discharged to complete shutdown, then plug it in and wait for it to charge. This is how the battery is calibrated, and this process is especially important for lithium-ion devices.
- Use original charger for charging. This is important because the technical parameters and characteristics of the battery and charging are the same.
- When not charging, recharge your phone using USB cable connected to a computer is not recommended. Connecting to a laptop or computer will not allow you to provide the desired amount of current that the original charger provides. In addition, using a cord connected to a PC affects the charging time quite a lot, which increases. This is reflected in the technical parameters and characteristics of the battery as a whole.
- If you find yourself in a zone of no mobile network signal, which makes it impossible to use your smartphone for its intended purpose, turn off the device. For example, going down the subway or leaving the city, where the mobile network does not catch. When the phone is in an area where the network is too weak, it will automatically search for it, which will reduce the battery.
- If you use the sound method of alerting calls and messages, then turn off the vibration. Vibration "eats" a significant part of the battery charge.
- Do not put animation on the desktop, this also affects the charge. If possible, use black pictures for the desktop screen. Displays designed with AMOLED technology use significantly less power when they display black colors instead of light colors.
- Be aware that the discharge is also affected by too high or low temperatures. Lithium batteries are more sensitive to both overheating and hypothermia, the most suitable option would be to use the battery at a temperature of 15 degrees Celsius. At a temperature of 0 degrees, the battery will lose about 6-8% of its capacity in twelve months. If the air temperature is 25%, then the battery capacity will decrease to 20%. At higher temperatures - 40-50% - the battery can lose 40% of its capacity in a year.
Directly if you cannot recharge the battery in the standard way. For example, if the gadget has a broken connector or the contacts have gone. In this case, the charging wire will be useless. But you can pull out the battery and power it directly from the cable or external drive.
With these cell phone tweaks, your battery charges faster
The manufacturer has marked on its home page about 60 devices, at least one of the versions. A certified charger is also required. AT latest version 0 feature according to the smartphone manufacturer will load from 0 to 70 percent within 20 minutes. 
When the phone is charging, you can disable all features that consume power. Even reduced brightness saves energy and protects the battery.
Read our article on how to charge your tablet directly and how to do it right.
Doubt whether you can directly charge? This is quite real, but not safe for the device. Mobile gadgets do not provide this method of charging. Therefore, use a direct connection only as a last resort, when there is no other way. And don't do it for no reason, just to see if it works. Of course, if you still need this energy storage device.
It so happened that you were on the road all day and could only access mobile data. If you boot up your phone at the same time, the process takes much longer. So turn off automatic updates apps in your smartphone settings and run updates when you have time - for example, overnight.
Surprisingly, when turned off automatic synchronization it takes a long time for the battery. It is a data backup so that important contacts and files are not lost. If you cannot ensure availability, Aircraft mode is suitable, in which all wireless devices and wireless communication features are disabled. All of these features can be found on a mobile phone in the "Settings" menu. Even more consistently: disable your mobile phone while charging - this saves maximum power.
If the part is built-in, nothing will work. You will not be able to "get" to its terminals. She needs to be pulled out. But there are workarounds here too. For example, you can buy wireless charging. Although older models do not support power transmission over the air and a suitable set of equipment is expensive.
Before you charge the gadget's battery directly, find out if it works. If you cannot power it due to malfunctions or hardware failures, take the device to service center. Do not try to fix the device yourself if you do not know how to do it. It is better to entrust it to professionals.
Even the most advanced smartphones won't last more than a day of heavy use before you have to recharge the battery. Therefore, it is recommended that you handle the battery as gently as possible. It also provides positive influence during charging. For lithium-ion batteries, which are the standard today, the following guidelines should be followed.
Simple means bring a lot of smartphone battery life
If the mobile phone triggers an emergency shutdown at zero percent, the battery may lose power. Charge the battery at room temperature. Temperatures that are too high or too cold affect your mobile phone's charging cycle and cause your battery to age faster.
- The battery feels better when it is not fully charged and charged.
- Try to keep the load level between 30 and 70 percent.
- Do not charge the battery too soon.
- Before turning the phone back on, the bottom bar must be less than 50%.
- More importantly, it's not too late to replenish your electricity supply.
If the energy storage device is constantly charged outside the case, it will quickly become unusable. Direct "connect" is a temporary solution.
Connection
It is possible to recharge the battery ( battery) "bare" wires. You will need an old or unwanted charging cable. Why "unnecessary"? Because you will cut it. And after that you will not be able to use it for its intended purpose.
First of all, a high-quality power supply, which may also come from a manufacturer other than your mobile phone, can cause the process to speed up quickly. If you also spare the battery with the above measures, you can still use your smartphone reasonably well after many charge cycles.
Your cellular telephone Or is the tablet too slow? In practice, this little change can make your phone or tablet a lot faster without the need for obscure tweaking. Scroll down to the Build Number field. Now enter this field seven times in a row.
Here is how to charge directly:
Again, this is risky. You may be electrocuted. The energy storage device can overheat, melt or even explode. A charged gadget is hardly worth it.
During feeding, do not hold it in your hands, but at the same time monitor its temperature. If it seems too hot to you, turn it off.
So, go back to settings and open the now available "developer options" entry. In this menu, you will now scroll down the page until you find three options: Window Animation Scale, Transition Scale, and Animation Time Scale.
Exit the menu and navigate through the system a bit. You will quickly notice that your smartphone or tablet feels faster with the toggle. If it's not, the animation will simply revert to the default value. By reducing animation sequences, you can speed up your smartphone or tablet.
It's not the only option, directly. You can also connect one battery to another. Cut the cable in the same way, remove the insulation and attach the bare wires to the contacts. Only not to one battery, but to two. And the drive with a smaller charge will transfer energy. Devices must fully match in terms of characteristics (current, power, and so on).
If you are interested in system design aspects, you can learn about animation by switching to "slow motion" animation. The following tips and tricks show that a tablet is much more possible than reading books, listening to music and watching movies. Do not wait for the display to turn off automatically as the screen backlight requires a lot of power. In the factory settings, the stop state is triggered only after five minutes - you must change this.
For example, change the value to "30 seconds". You must also set the Auto Brightness feature to On. In the "Sounds and screen" section. But how to remove unnecessary applications? To do this, hold your finger on the application icon until a menu appears, and then select the "Remove from device" option. In the same way, apps and media can also be removed from the start screen carousel. Read past issues of magazines: if you subscribe to a magazine and a new edition comes out, only the current booklet will be displayed on the shelf.
When connected to a power outlet, there is a risk that the power and current strength are not suitable for the gadget, and then it will fail. But when feeding the "battery from the battery" you can break both at once.
Universal charger "Frog"
Since connecting the gadget directly to charging is not the most best idea you can use the universal charger. It is called "frog" or "toad" (it looks like this animal).
But the old versions have not disappeared - they are only stacked one after the other. Hold your finger in the current magazine to switch to old paperclips. Avoid Fingerprints: The input pen replaces tapping with your fingers - the display stays clean and shines. To play, a special application must be installed.
Solving the problem of fast charge consumption
Do you want to quickly charge your mobile phone? The problem with such defective batteries leads us to find ourselves in a vicious circle of juggling that we do our best to improve the autonomy of the device: install applications that make changes manually and spend a lot of time near the power outlet while the mobile is charged .
- Lift its cover, under which there will be two terminals.
- Attach a battery to them. If it has more contacts, it's not scary. The main thing is that the terminals "coincide" with the two extreme contacts.
- Close the frog cover. She will press and fix the gadget.
- Plug the charger into an outlet.
- If the red light on it lights up, then everything is fine.
- If not, try flipping the battery over. Perhaps the "plus or minus" did not match.
The good thing is that while they have a solution for making better batteries, we can use some other methods to alleviate how annoying it is how often you have to charge your smartphone. For example, when we are short on time, there are some tricks that will make it load faster.
Use a more powerful charger
If a dedicated charger is used, up to 5A is suggested, which will be more than enough depending on the device being charged. The charger that comes with you when you buy your device is usually more than enough to charge it, but it's not always the fastest option.