The interior made of natural wood looks very solid, presentable, soft and pleasant. Coniferous material is especially valuable, which also contributes to the natural healing of all residents of the house during operation. But there is one problem that arises when laying softwood - how to get rid of resin on the boards, which must be solved correctly. How to remove resin from a tree in a pine bath or steam room? That is what this article will be about.
Why remove resin?
Coniferous wood species such as pine, spruce, larch are unusually beautiful, but they emit natural resins not only after sawing, but also during growth. This resin is a very viscous, fluid substance, so the process of interior decoration is much more complicated, because:
- Boards where the resin leaks out become extremely sticky and will quickly bond to whatever tools and materials they come into contact with.
- Usually, the areas where the “resin” flows out look a little darker than the whole board, so the uniformity of the coating cannot be achieved.
- Staining to perform with the resulting substance is impossible, and unprofitable. Paint or varnish will not harden on resin stains, respectively - there will remain convex, unprotected from the harmful effects of moisture, areas of the coating that stand out by their color.
What do you need to know about resin?
Resin removal is best done only after the board has been sanded. Although compliance with this rule will not be a guarantee that the "resin" will not prove itself again. Sometimes such a substance begins to ooze under the influence of certain factors after the finishing work is completed. This factor must be taken into account before giving preference to coniferous decoration of the house.
How to remove resin from the board?
In order to properly prepare all the elements for laying the floor, wall cladding or ceiling, you need to correctly get rid of the resin on the boards. This can be done in several ways.
Mechanical removal
In this case, in order to remove the resin from the boards, it is necessary to wait for the complete solidification of the fluid mass. Then, armed with a knife, remove each piece by hand.
Important! After removing all unwanted sagging, it is necessary to sand the surface of the wood with sandpaper or a special tool.
Solvents
To dissolve the "resin" you can use improvised chemistry. The following tools are suitable for this purpose:
- alcohol;
- White Spirit;
- turpentine;
- refined gasoline;
- acetone;
- nitro solvent.
Important! The use of any of these solvents does not affect the structure and shade of softwood. But when using it, it is advisable to protect yourself with gloves, a respirator so that caustic volatile vapors do not provoke irritation of the skin and mucous membranes.
Other ways and means
You can also get rid of resin on the boards with the help of folk methods, which consist in the use of available kitchen and pharmacy solutions, powders.
The following methods effectively help to solve the problem:
- Ammonium chloride or ammonia solution. Such a tool is diluted with acetone in a ratio of 2: 1. Apply to the surface with rubbing movements until foam is formed. Remains of foam and resin are removed after 20 minutes with a clean, damp cloth.
- Potash and soda in equal proportions (50 g each). Both substances are mixed and poured into 1 liter of hot water. To enhance the effect, you can add 250 ml of acetone.
- Caustic soda. It is dissolved in half a liter cold water. You can also add 250 ml of a solvent such as acetone.
Important! Any of these products can only be applied to a sanded, but not painted surface. Otherwise, acetone will dissolve the paint and the finished finish will not look the most attractive way.
Safe Recipes
In order not to damage the wood either mechanically or chemically, or in the case of a small amount of resin, use the following products to get rid of the resin on the boards:
- 25 g of wood or any liquid soap mixed with 50 ml of ammonia and 1 liter of hot water;
- acetic solution of concentrated acid and water in a ratio of 1:50.
Important! The last resort is also well suited to remove alkali residues after using any other substance or solution to get rid of the resin on the boards. It helps a lot, including when you wash ready-made walls and you need to remove the remnants of the cleaner from the joints of the crowns.
When the walls are already sheathed
If the resin began to appear from the boards after they were laid on the walls, you are unlikely to have a desire to spend a lot of time pointwise removing each piece of “resin” with solvents or a knife.
In this case, you can burn through all the places where coniferous wood sap is formed with a blowtorch, then cleaning them with sandpaper of a suitable degree of graininess.
footage
When giving preference to a coniferous board, remember that you will not be able to completely get rid of the resin on the boards. It can appear at any, the most unexpected moment for you. But this is actually not such a global problem, because it is possible to remove the “sap”, and the beauty, environmental friendliness and benefits of such wood cannot be compared with any modern plastic or other material. Let your home be filled with only the pleasant aroma of pine needles and always look cozy. And with minor resin problems, you now know how to deal with it.
Resin stains on clothes are a common problem for those who like to spend summer days in nature, especially in the forest. The resin is sticky, clings to dirt and dust. But if you know how to remove resin from clothes, then you can get rid of stains without harming things. The suggested tricks are suitable for different materials and fabrics and help to remove stains without a trace. All you need is the availability of the necessary funds.
Preparation for washing clothes from tree resin
As in other similar cases, the rule works with washing the resin - the less time has passed since the stain appeared, the easier it is to get rid of it. But old stains can also be dealt with.
You should also know that if the resin was noticed immediately after it got on the clothes, you should not try to remove it fresh - you won’t get rid of it completely in this way, but later it will be more difficult, as it will smear and penetrate deeper into the fabric structure.
In any case, you should first get rid of the thick part of the resin, and only then remove the remaining stain.
How to remove resin in folk ways
Specialized store funds for dissolving tar stains on fabric are unpopular and expensive, but there are a number of folk recipes helping to get rid of such stains and keep clothes in good condition. To avoid unexpected troubles, you first need to test the selected substance on that part of the fabric that is not striking. This is necessary in order to make sure that the product does not spoil the material: it does not corrode it, does not wash the paint, does not leave streaks. If any of this happens, you need to choose another cleaning agent. In the case of delicate fabrics that require special handling, it is better to contact a dry cleaner, where the problem will be solved quickly. For simpler cases, you can use one of the proposed substances available in the house or within walking distance. 
Turpentine + alcohol
Apply turpentine to the stain and leave for half an hour. Then, with a cotton swab dipped in alcohol, wipe the contamination until it completely disappears. To eliminate the remaining pungent odor, after the procedure it is enough to wash the item as usual.
Coca Cola
You can soak a thing or a soiled place in ordinary, undiluted Coca-Cola for half an hour or an hour, and then just wash it. It is undesirable to use other carbonated drinks, because they can leave stains, but a positive effect may not be achieved.
Dishwashing liquid
First you need to drop sunflower oil on the stain and leave it for half an hour. Then wipe it with a cotton swab, on which dishwashing detergent should be applied. Then you can wash it off with plain water.
Instead of dish detergent, you can take a soap solution, although this is more relevant for the skin.
Refined gasoline
It is enough to hold the item in refined gasoline, then wash it as usual to eliminate the smell (you may need to do this more than once).
Important! Gasoline is needed precisely purified, bought in a special store, and not ordinary, intended for refueling cars, which corrodes the fabric and leaves stains.
You can use regular acetone or nail polish remover. They need to wet the napkin and gently rub the stain with it until it disappears completely. It is necessary to repeat the procedure in several stages, between which it is necessary to pause for several hours - acetone can dissolve the resin not immediately, but over time.
Most of the proposed cleaning agents can leave an unpleasant odor. It is easy to get rid of it: after cleaning it is enough to wash the item with ordinary washing powder or use any fabric care product. If this does not help, then you can hang it in the cold or place it in the freezer, and then ventilate it. In any case, sooner or later the smell will go away on its own, and the proposed methods only help speed up this process.
We use solvents
If the stained fabric is not classified as delicate, you can clean it with a special solution, which consists of:
- 4 drops of ammonia;
- 4 drops of turpentine;
- a teaspoon of starch.
After thoroughly mixing the ingredients, the mixture must be applied to the stain and wait until it is completely dry, and after a while scrape off with a stiff brush. Perhaps, after this, traces of resin will remain, and then the procedure should be repeated again.
What not to do with a tar trace
Before choosing what to wash tree resin from clothes, some important factors should be taken into account, otherwise, by negligence, you can damage the thing irrevocably.
How can you dissolve resin? different methods, the thing soiled by it will not be spoiled forever. It is only important to know which methods are suitable for a particular material, as well as to have the necessary tools on hand. Even for delicate fabrics, there are safe options with which the thing will return to its normal state. In any case, do not worry and throw the thing away if there is a chance to save it. There are many ways to get rid of tar stains, and one of them will definitely help.
It is very easy to get dirty with resin on a walk in the forest, at a photo shoot or during repair work. It is much more difficult then to get rid of this substance on the skin of the hands, clothes, hair. There are ways to help quickly wash the resin.
How to wash resin from hands
When traveling to the pine forest, hiking for mushrooms, or when covering the roof, we can stain our hands and hair with wood or epoxy resin. They harden within a day. Epoxy may vitrify earlier (within 7-14 hours), depending on its composition. Drops of artificial and natural resins are removed in different ways, but the described methods should be used until the resin completely hardens on the skin.
Wood resin is easier to clean than artificial resin.
How to clean epoxy from hands and other skin areas
Epoxy is a kind of strong adhesive. He grips tightly various materials: wood, ruberoid, plastic. Epoxy resin is used for repairs in liquid form, after a while it hardens. It is necessary to immediately clean the skin of resin drops, since with prolonged contact it causes irritation and swelling of the skin, serves as a source of allergies, redness and tearing of the eyes, irritation of the respiratory tract.
Epoxy resin is a carcinogen that, upon contact with the skin, begins to poison the body. It should be removed immediately! If it is still soft, do not soak the solvents on the skin, but rub the dirt with them.
Resin Cleansing Cream for Children
The most gentle way is a cream for children. It will not only remove impurities, but also soften the skin, reduce the level of irritation. In addition, it rarely causes allergies, suitable for both adults and children. It can be used for delicate and sensitive skin.
- We apply the product to the resin and the skin around the stain.
- Scrub immediately, then apply more cream and rub again until the stains are completely cleared. You can use a hard brush for this.
- Wash off the residue with soap.
Baby cream safely removes epoxy
Coca-Cola as a solvent
Dissolves Coca-Cola resin well.
It is known that Coca-Cola is able to clean many things: a sink and a bathtub from limescale, pipes from rust, pans from burnt food. Its effectiveness is explained by the content of carbon dioxide and phosphoric acid.
In fact, you can use not only Cola. Both Fanta and Sprite are often used as epoxy solvents.
Soda
Soda reacts chemically with the resin, softening it. There will be no harm from prolonged contact with soda. On the contrary, the substance relieves irritation and inflammation of the skin. The main thing is to prevent the gruel from drying out on your hands. It can be used on delicate areas of the skin, this method will not harm children. We will need:
- water - 1 tbsp. l.;
- soda - 3 tsp
Cleansing:
We clean the skin with rubber glue
Any rubber adhesive must contain a solvent. It acts on drops of resin that have fallen on the skin. Do not use on children's skin: an allergic reaction may occur. It is important not to keep the glue longer than 10 seconds, otherwise, in addition to the resin, you will also have to remove it.
- Apply a little rubber glue to the stained area of \u200b\u200bthe skin.
- Hold for 10 seconds.
- Roll the resin with your fingers.
- Wash your hands thoroughly with soap.
The composition of the rubber adhesive includes a solvent that cleans the epoxy well from the skin
A mixture of turpentine, starch and ammonia
To cleanse the skin, you should choose gum turpentine. Unlike technical, this product does not leave burns on the skin and does not cause allergies, dermatitis. Gum turpentine, being a highly purified substance, softens the resin to the required consistency. To get rid of epoxy, we need:
- ammonia - 3 drops;
- starch - 1 tbsp. l.;
- turpentine - 4 drops.
Cleansing:
- We mix the ingredients.
- Apply to the contaminated area of the skin.
- Scrub with a hand brush.
- I wash my hands.
They also use turpentine with the addition of ammonia and starch to clean hands from resin.
The technical solution can only be used to clean clothes, shoes and other household items. Since its use negatively affects the human respiratory organs and can leave chemical burns on the skin, you should work with the product with gloves and a mask.
Removes tar from leather with acetone and products containing it, such as nail polish remover. It is not recommended to use acetone for colored clothes, as the color will be washed out by the solvent. In no case should you use this method for children's and delicate skin.
Acetone is used in a well-ventilated area and away from children, as inhalation of this substance can provoke respiratory diseases.
Operating procedure:
- Apply acetone or nail polish remover to a cotton pad.
- Apply to the resin for 3-5 seconds.
- We clean up pollution.
- After applying acetone, lubricate the skin with a moisturizer.
Acetone cleans epoxy well
Video: acetone - epoxy solvent
How to wash the resin of pine and other coniferous trees from the skin of your hands
You can also use acetone or gasoline to clean your hands of tree resin. But you need to remember that in this case it is necessary to carry out the cleaning procedure in a well-ventilated area. In addition to solvents, folk methods are also used.
The method is absolutely safe for children and adults. Can be applied to any skin type. Sunflower oil changes the consistency of the resin to a more liquid one, softens the substance. This makes the resin easier to remove from the skin.
- Apply plenty of sunflower oil to a cotton swab.
- Rub into the skin for 30-40 minutes until the resin is removed.
- Wash off with hot water and soap.
Copes well with traces of wood resin sunflower oil
Wash the resin with normal hand-washing products (soap and liquid soap) is unlikely to succeed. My dad washes the tar off a lot with regular gasoline or kerosene and then regular soap. Sunflower or olive oil also helps a lot.
Murochka striped
You can wash your hands of adhering pine resin with ordinary vegetable oil.
Athanasius44
http://www.bolshoyvopros.ru/questions/659434-chem-otmyt-ruki-ot-smoly.html
How to Remove Pine Cone Resin Stains with Rubbing Alcohol
Alcohol is used for a wide variety of contaminants, including against tar drops on the skin. Prolonged contact of alcohol with the skin is harmless. It does not threaten chemical burns and wounds, on the contrary, it disinfects hands. The alcohol softens the resin to a sticky, viscous consistency, which allows the resin droplets to be removed. The tool can be used for adult and children's skin. Since alcohol dries slightly, evaporating from the surface, after applying it, you can smear the skin area with baby cream.
- Soak a cotton pad in alcohol.
- Apply to resin for 20 minutes.
- We wipe the stain with cotton wool or gauze.
Alcohol easily removes resin from the skin
Citric acid from traces of resin
Citric acid in everyday life is used as a mild chemical technical cleaner. It effectively dissolves the resin due to its chemical composition. Citric acid is not recommended for delicate areas of the body and children's skin: it can lead to irritation.
- Take a soft sponge or cotton pad. We wet with water.
- Sprinkle the sponge with acid and rub the resin from the edges to the center of the stain.
- Wash off with warm water and soap.
Citric acid is able to clean tar stains
Prohibited Methods
Some products clean the resin well, but negatively affect the skin. Their use is not recommended.
hot way
It is effectively used for cleaning clothes, shoes, household items, but not for the skin of the hands or other parts of the body. The resin is ironed through the parchment with a hot iron. At high temperatures, the substance softens and can be removed with a sponge or cloth.
Cold cleaning method
It is also used only for household items. A thing stained with resin is frozen. Under the influence of low temperature, the resin crystallizes. Then it is smashed with a hammer. You can, of course, try and carefully wipe the dirty place on your hand with a piece of ice for several minutes so that the resin hardens. But the desired crystallized structure of the substance cannot be achieved in this way. But to get a slight frostbite of the skin is as easy as shelling pears.
Using the cold method of cleaning the resin, you can get frostbite of the limbs
Solvents for epoxy adhesive and acid
Chemicals that are designed to clean epoxy - DMSO and DMF - can be bought at any pharmacy. They are used to thin and dissolve resins. But none of these solvents can be used to cleanse the skin of the hands, face and other parts of the body from resin.
DMF and DMSO do not corrode metals and plastics based on non-polar hydrocarbons do not damage either. But some microcircuit / transistor cases can also swell in them, because they can be made on the basis of epoxy resins, especially old ones. Well, you need to be careful with them when working. DMF by itself is not particularly useful, and DMSO improves the transport of substances soluble in it through the skin, therefore, it can help the skin absorb anything unwanted.
pashka000
http://radiokot.ru/forum/viewtopic.php?f=3&t=101246&start=20&view=print
DMSO (dimethyl sulfoxide), used to be sold in pharmacies under the name Dimexide (in my opinion, it is diluted with something there). Will dissolve almost all organic matter. Of the minuses - if it stays in the air for a long time, it oxidizes and stinks, and secondly, it transfers very well what is dissolved in it through the skin, which is why it is contained in all sorts of rubbing, dolobens, fastumgels, etc. (wear gloves)
http://www.radioscanner.ru/forum/topic38626.html
Washing SP-6 is also the strongest solvent. It is designed to remove varnishes and paints from old ferrous metal, it also cleans epoxy. True, SP-6 is used in car services and at construction sites. After applying the wash, the paintwork swells, breaking down to a loose mass, which is then removed with a brush.
It is absolutely impossible to use SP-6 wash to clean hands from resin. In case of contact with the skin, wash hands or other parts of the body with water immediately. If this is not done, then a chemical burn is guaranteed. When using SP-6, a chemical burn of the respiratory tract is also possible. After removing the wash, you need to consult a doctor.
It is strictly forbidden to use acid to cleanse resin from body parts. After all, sulfuric and tetrafluoroboric acids in contact with the skin form an instant chemical burn. In this case, coagulation necrosis is formed almost instantly - tissue necrosis. A white crust with clearly defined borders instantly forms on the skin. The stronger the concentration of acids, the deeper the wound under the crust.
Acid contact with the skin can lead to serious consequences.
How to clean resin from hair
Not only hands, feet or face can get dirty in resin. It is much more difficult for housewives when the resin droplets are frozen in chic long hair. We will not rush and take up scissors. Let's try to fix the situation.
Peanut butter and mayonnaise
And again we turn to folk methods. Peanut butter or mayonnaise will help us. They soften the resin, strengthen the hair structure. For children, soap can be replaced with a special shampoo, which, if it gets into the eyes, will not pinch much. The method is great for both long and short hair.
- As we have already said, in no case should you clean the resin from children's skin with solvents, including acetone and gasoline. In addition to the fact that respiratory diseases can occur, there is a chance of getting chemical burns and allergies.
- Do not use citric acid either. Although it is the mildest of the existing acids, it can also damage the skin and cause irritation.
- For children, natural products are used: soda, sunflower, olive or peanut oil.
- It is important to ensure that when cleaning the product does not get into the eyes, nose, ears, mouth. If a child swallows oil or a couple of grains of soda, there will be no harm. But, for example, a cream may well cause an upset of the gastrointestinal tract or poisoning.
- If molten hot resin gets on the skin, a burn or open wound forms under it. It is washed with water. There is no need to cover it with adhesive tape or wrap it with a bandage. It is important to keep the wound open and seek medical attention immediately.
- If, after cleaning the resin, the temperature rises, blisters form on the skin, you should also immediately go to the doctor.
We examined various chemical and folk methods for cleaning resin from hands, hair and children's skin. They will help get rid of this sticky substance without harming your health and the health of your little ones.
Resting in a pine forest has little to compare with. Fresh air, intoxicating aroma, solitude with nature... All these joyful feelings disappear at the sight of resin on a car body. It is not easy to remove such pollution, moreover, with inaccurate actions it is possible. We have selected the most effective, simple and safe methods, which will make it easy to cope with difficult dirt and preserve the surface of the car.
How to clean resin from a car
There are many ways that allow you to remove pine resin from the body. Not all of them are equally effective and easy to use. Some methods will require financial investments, other options will take a lot of your time. And there are some methods that you should not pay attention to at all.
- soapy hot water;
- commercial solvents designed specifically for wood tar (available in a wide range and available at many gas stations);
- White Spirit;
- hand sanitizer;
- vodka;
Let's consider each of these methods in more detail.
Effective ways to remove tree resin from a car body
When it is necessary to wash the resin from the machine, first of all it is necessary to wash it using hot water. soapy water. We draw your attention - the water should be really hot, as much as possible.
- White spirit is excellent at dissolving tar, but it can also damage automotive surfaces and dissolve paintwork. White spirit must be applied to a soft cloth, applied to the dirt and rubbed a little without effort.
- Known and loved by all motorists, the “Vedeshka” or WD-40 does an excellent job with similar and many other contaminants. The product must be applied directly to the sticky spot, wait a bit and remove the resin with a rag.
- The usual hand sanitizer, which is sold in pharmacies and supermarkets in checkout areas, can surprise you with its ability to cope with sticky stains on cars. The principle of using such a tool is similar to that described above. The product is applied to the stain, left for a while and then removed with a rag.
- Ordinary vodka, even the cheapest, has a similar effect. It is used in the same way.
- Goo-gone is a household tool that is very popular among Russian housewives. Oddly enough, but Goo-gone is able to corrode the resin, even frozen and fairly boiled.
We have described many ways that allow you to remove pine resin from pine resin. Which of them did you like the most? Do not rush to buy auto chemicals and review home stocks. First you need to try to wash the car with hot water.
Resin on clothing is considered a stubborn stain. This adhesive substance is able to penetrate deeply into the fibers of the fabric and stick them together.
Resin is of 2 types: plant origin and artificial.
Vegetable is a sticky, hardening sap that is secreted by trees such as spruce, pine, linden, poplar.
Artificial is obtained during chemical reactions, used in construction, repair work, for the manufacture of jewelry.
In its normal state, the resin is solid, but when heated, it becomes liquid.
Wood resin is much easier to remove from fabric than synthetic resin.
A large number of clothes deteriorate due to ignorance of the principles of working with the material. Consider the main theses that must be considered in order to remove hardened marks from clothes:
- The most common mistake is a quick wash. Many housewives immediately try to soak, clean the soiled thing. If washed ahead of time, the substance will become even denser, eat into the fabric, and it will be problematic to remove it. Therefore, treatment should be carried out before washing clothes.
- Do not rub the stain with pine resin. As a result of heating, it will eat into the fibers, it will become larger.
- Do not treat delicate items with alcohol. Use oil and dish soap as a cleanser.
- Do not use bleach for colored fabrics.
- Do not violate time intervals during cleaning.
- Do not use gasoline or other solvents on synthetics.
- Do not soak the product with other dirty things.
Preparation
To successfully clean clothes from resin, you need to carry out several preparatory activities:
- remove dust and dirt from the surface of the product to be cleaned;
- turn the thing inside out;
- carefully rip and separate the lining, if any;
- treat only the contaminated area of \u200b\u200bthe fabric;
- to prevent the spread of the stain, moisten the area around it and sprinkle with starch;
- place a piece of plywood, wood or plastic under the surface to be treated;
- wear protective gloves.
Aggressive substances should be tested on an inconspicuous area of \u200b\u200bthe clothing. If the fiber structure remains unchanged, continue the procedure.
mechanical way
The first step to clean the resin is mechanical processing. It is necessary to carefully remove the frozen crust with a sharp object. You can take a knife, wooden spatulas, a razor blade, a spoon. Do not stretch the fabric, clean only upper layer products. 
Attention! Silk and thin knitwear are easily damaged, so the mechanical method is undesirable.
Temperature effects
Heat treatment of the material allows you to remove fresh contamination. It can be a heating operation or, conversely, cooling.
When exposed to low temperatures:
- Place damaged clothes in the freezer for 1-2 hours. During this time, the resin will harden and become brittle.
- Wrinkle clothes. There will be only small pieces that can be removed with a brush. Thin material does not need to be crushed, it is enough to rub and shake off the remnants of hardened resin.
Advice! If the product does not fit in the freezer, you can attach pieces of ice to it. The effect will be the same.
Exposure to high temperatures Used to remove resin from delicate fabrics. 
For cleaning by heating, follow the following procedure:
- Place paper towels on both sides.
- Iron with a hot iron.
- The crust will begin to melt and soak into the fabric. When the napkin becomes dirty, remove and replace with a new one.
- After cleaning, rub the damaged area laundry soap. Wait 15-20 minutes, wash.
Advice! If the material is very dense, use a hair dryer. Mentally divide the trace into several parts (about 5 cm). Blow hot air over the areas one by one to remove any dirt. Remove the rest with a tissue.
Solvents can be used if a trace remains after using the heat treatment.
Chemicals
There are always effective chemicals in the house that will help remove tar from clothes. When working with them, it is important to follow a few rules:
- Wipe marks gently, avoid contact with skin: chemical solutions may cause a burn.
- For light soiling, a solvent or stain remover is best applied with a pipette.
Attention! Treat with flammable liquids away from open flames.
Oil + dishwashing liquid
Fresh resin that has not had time to dry is the easiest to clean. Detergent has a degreasing property, so it is used to eliminate oil stains. You can wash clothes in the following way:
- Treat the damaged area with oil. Wait 30 minutes.
- Pour dish detergent.
- Leave to soak for 30 minutes.
- Rinse everything and rinse the product.
Advice! To clean resin from skin, wool or fur, just wait 5 minutes. Then remove the remnants with a napkin.
Alcohol
- Pour a small amount of alcohol directly on the damaged area, leave for 20-30 minutes. Grate with laundry soap, wash according to the requirements of the material. If the contamination is old, first smear the damaged area with oil.
- Pour the alcohol-based solvent on the problem area, wait 20 minutes. Moisten a cotton pad with the same solution and wipe the dirt.
Attention! Do not use as a cleaner for bright colors or delicate fabrics: discoloration will occur.
Coca Cola
The composition of "Coca-Cola" includes phosphoric acid, which will help to clean the product as soon as possible. 
Method 1
Moisten the damaged area liberally and wait 2-3 hours. You can soak the item completely. When the resin is soaked, rub the stain with a brush and rinse.
Method 2
This method is more gentle. Wash off the contamination with a cotton swab soaked in Coca-Cola, leave for 20-30 minutes. Rinse and wash.
Instead of cola, you can take Fanta, Sprite. To remove traces of resin from light-colored fabrics, you need to use colorless sparkling water.
Attention! The method is not suitable for cleaning white things. They may lose their whiteness.
Solvents
Using aggressive solvents is effective, but quite risky: clothes can be completely ruined. The methods are as follows:
Attention! All substances have a pronounced odor. Processing should be carried out in a well-ventilated area.
After using any of these methods, wash the item with
Cleaning paste
Old stains are easy to clean with a special paste:
- Take 1 tsp. ammonia and turpentine, add 1 tbsp. l. potato starch.
- Lubricate the damaged area with a dense, thick layer, leave for several hours.
- When the paste dries together with the resin, rub it with a brush. The dried mixture will be easy to remove from the material along with the resin.
- The procedure can be repeated several times if the trace does not disappear.
- When finished, wash.
Advice. For old stains, cover the hardened crust with butter or vegetable oil in advance. When the resin softens, clean it off with a knife or the sharp end of scissors, and apply a cleaning paste on the remains.
Pasta with the addition of white clay is just as effective. Mix 1 tsp. clay, potato starch and 1 drop of ammonia. Dilute to a mushy state. Add a few drops of turpentine, stir and rub on the stain. When dry, remove with a brush.
How to clean epoxy?
Epoxy resin is an adhesive that has high strength, waterproof properties and is resistant to many chemical compounds.
To clean epoxy, you must:
- Remove the dried layer mechanically.
- Next, use solvents containing alcohol or acetone. The resin should be soaked with liquid and left for a quarter of an hour.
- Remove substance with a cotton pad.
Epoxy resin can be removed by heating. It becomes liquid or gel-like, easily removed from the surface.
Attention! When heated, vapors dangerous to the body are released. Protective goggles and clothing are required. The room must be constantly ventilated.