Isolate for beginners diagrams with numbers flowers step by step
allows you to create genuine masterpieces. It is so easy to master it that even each of the beginner needlewomen will soon be able to become skilled in embroidering beautiful postcards, still lifes, ornaments and even portraits. In order to bring this moment closer, you need to learn how to create beautiful flowers using this technique. 
Required inventory
To work in the isothread technique, you will need to prepare the following “ingredients”:
Basic Rules
In making beautiful flowers, the pattern with numbers you have chosen will help you, as well as tips for beginners that our master class offers. If you already know how the angle and circle are worked out, then you have to act as follows:
Strengthening the effect Having started working in the isothread technique, you will soon be convinced that it is it, like no other, that is perfect for creating truly luxurious products. If complex schemes are initially in your hands, then to enhance the decorative effects, act as she tells you. Otherwise, our master class for beginners will help you.
You have to do the following manipulations:
Schemes always designate each of the stages with Roman numerals.
Petal elaboration 
A flower petal embroidered using the isothread technique should be worked out according to the type of incomplete stitching of an oval. You should adhere to the following recommendations:
- work should begin from the sharp end of the embroidered element;
- work should end there;
- choose the distance between 2 points equal to the line that touches the bottom of the embroidered element.
We embroider flowers for the holiday
How about embroidering delicate flowers of chamomile, forget-me-nots and cornflowers using the technique of sewing? Choose the schemes that suit you and boldly act!
Chamomile 
To make a chamomile flower using the isothread technique, you will need to perform the following manipulations:
- embroider a few petals;
- in the middle of each of the resulting flowers, sew a beautiful bead;
- work out the buds (the diagrams will tell you exactly how to do this);
- work the leaves and stems in the same way.
Forget-me-not Get a beautiful and delicate forget-me-not that will decorate your interior, you can by following these steps:
- embroider flowers;
- carefully work out the leaves (as indicated by the diagrams);
- draw stems in increments of one to three.
cornflower 
Would you like a flower to be present in your house - a symbol of purity, tenderness and holiness? Then, without delay, start embroidering a cornflower. This wild flower will ideally fit into the interior or be a great gift for a dear person. And you will need to do the following:
- work out the core of the flower (steps one to ten);
- carefully, sew a bead along the contour;
- depict the petals of a plant;
- work through the leaves (steps one to eight);
- embroider stems (steps one to three);
- refine the rest of the elements.
Work is ready! 
In order for your work to be perfect, try to follow the tips below:
Finally
The finished picture with flowers can be glued onto a cardboard sheet. If there is a desire, you can make a frame, and then give it or hang it on the wall.
Schemes with flowers
Comments
related posts:
Isolate for beginners diagrams with butterfly numbers (pictures)
isothread(other names - thread graphics, thread graphics, thread design) - a type of decorative and applied art, graphic technique, obtaining an image using threads on some kind of solid base (most often on cardboard), which allegedly appeared in the 17th century in England. In English-speaking countries, the name "embroidery on paper" is used - embroidery on paper. Sometimes the name "paper embroidery" is found, occasionally "Form-A-Lines" - forms from lines, in French "broderie sur papier". In German-speaking countries, "pickpoints" are a bitmap.
English weavers (there is a version that in this way they made sketches of future patterns for fabric) invented an original way of weaving threads. They pulled the threads in a certain sequence on the nails driven into the planks and received elegant products that decorated their home. Over time, this technology has been improved and subsequently spread to thick paper and cardboard, in which holes are first made.
The practice of isothread contributes to the aesthetic and mental, broadens one's horizons, cultivates artistic taste, forms a creative attitude to the surrounding life and moral ideas, teaches one to observe. Of course, the technique of isothread is sleight of hand and accuracy, and especially perseverance, but all this is acquired in the process of classes. First, a sample is considered, its constructive structure and implementation methods are analyzed. Then the object is modeled, the basis, the color of the thread is selected.
Using the isothread technique, you can create magnificent large decorative panels, still lifes, landscapes and even portraits, covers, ornaments, postcards, bookmarks and much more. Mastering this technique is quite simple if you carefully and consistently follow all the tips.
To work with isothread, you will need the following materials:
the basis on which, in fact, it is supposed to embroider (velvet paper, more often cardboard);
- what we will pierce holes in the base with (an awl or safety pin with a bead at the end);
- sewing threads (reel, floss, iris);
- adhesive tape or glue (for fixing the ends of the threads from the wrong side);
- needle;
- thin foam - a substrate when piercing cardboard.
Let's start with the base, it's the background. For isothread, cardboard or thick paper is most often used. Thinner paper may wrinkle during operation and, in addition, absorb moisture from fingers and deform.
Most often, cardboard is used for children's creativity, on the one hand it is colored, on the other it is gray. Also a good option can be cardboard with a white inside. That is, so that different sides of the cardboard are painted in different colors.
The best will be colored uniform cardboard. It is quite dense, but not too thick. The high density of the cardboard is needed so that at the moments of tightening or pulling the thread, the holes made in it do not break through. Also, a denser cardboard structure makes it possible to pierce holes with minimal distances between them, which in turn allows us to make our product more openwork and decorative.
The background color must be chosen depending on the artistic intent of the product. So it can be not only a plain background of various colors, but also a picture printed on a printer, or even wallpaper pasted onto cardboard.
Works made on velvet paper look very decorative and even luxurious, but because it is too thin, then it is also better to combine it with cardboard.
The appearance of the work is highly dependent on properly selected threads. Depending on the design of the work, it can be either shiny (this option is preferable) or non-shiny threads. The work looks neater if it is made with twisted threads, but sometimes the design requires the use of loose threads.
The most common thread for isothread is floss, because. with a very high decorative effect, they are easy to work with. Pay attention that the threads are evenly colored and have a shine, are even in thickness and do not fray. Iris is also very often used for embroidery, sometimes it is even preferable to floss.
Least of all, woolen threads are suitable for isothreading. They are fleecy and not very bright and, as a result, the work made from them does not look very pretty. However, for training or if the artistic intent requires it, these threads are also applicable.
In order to master the isothread technique, it is enough to know two basic techniques: "Filling the corner" and "Filling the circle" and the forms derived from them (star, square, triangle, oval, spiral, arc, teardrop).
Main: first, on the front side, we make a long stitch, in the middle of its open finals, each time we skip the same number of punctures and it should cross the previous stitch, and on the front wrong side, a huge needle is sent to the next puncture (short stitch), moving quickly in one good spirit, uncertainly assume clockwise.
Next, we will consider several techniques for working with isothread for beginners.
For clarity, the techniques for working with isothread are illustrated with diagrams with numbers showing the sequence of stitches and punctures.
Reception "Filling the corner".
- Draw any angle on the wrong side of the cardboard.
- Divide each side of the corner with a ruler into 6 (12 in total) equal parts (possible after 5 mm).
- Number the obtained points, starting from the top. Mark the vertex of the corner with the point "0".
- Make a needle of greater thickness or an awl, placing the foam under the cardboard, punctures at all points except the top ("0").
- Thread the thinner needle.
- Fill in the corner according to the scheme, starting from the inside.
Typically, a stylized image for isothread consists of 2 geometric shapes - an angle and a circle - and forms derived from them (star, square, triangle, oval, spiral, arc, teardrop). To master the technique of isothread, it is enough to know 2 basic techniques - filling (flashing) an angle and a circle.
The angle can be anything: straight, acute, obtuse (Fig. 1). The stitching of any corner is carried out from the edge to the top, on the other side - from the top of the corner to the edge (in the diagrams, the direction of movement to the puncture sites is shown by arrows).
If the angle is not equilateral, then the number of puncture sites should still be the same on both sides of the angle (Fig. 2).
In order to avoid a too rectilinear shape of the element or to get rid of the lines that limit the figure along the perimeter, the first stitch (from point 1 to point 2) is placed one point forward from the top of the corner.
Reception "Filling the circle".
- Draw a circle (first with a small radius of 30-50 mm).
- Divide the circle into 12 equal parts. After mastering the technique, you can divide the circle “by eye”, piercing the cardboard at regular intervals (the smaller the distance between the punctures, the more delicate and interesting the work is). It is important that there are an even number of points.
- Make punctures at the points obtained.
- Thread the needle.
- Fill in the circle according to the diagram.
The same circle (oval) can be sewn with stitches of different lengths. The longer the stitch, the more filled the circle will be and the smaller the center hole will be and vice versa.
The stitching is carried out in accordance with the general procedure: - a knot is tied at the end of the thread and the needle and thread are brought out to the front side at point 1; - make a stitch, sticking a needle at point 2; - on the wrong side make a broach to point 3; - on the front side, a stitch is made to point 4. This is continued until the circle is completely filled, so that two threads come out of each hole. On the front side, a pattern in the form of a star is formed, and on the wrong side - short broaches around the circumference.
To enhance the decorative effect, a circle or a closed contour can be stitched in several stages, each time choosing a chord (stitch) of a different length. In the diagram, the stages of flashing are indicated by Roman numerals.
Corner sewing rules can be used for circle sewing. To do this, the circle is divided into sectors.
Each sector can be stitched as a corner with a vertex in the center of the circle.
Sectors can also be stitched as corners with a vertex on the circle line.
Stitching is carried out in 2 stages: first in one direction - the first corners of each sector, then in the other direction - the second corners.
Arcs, spirals, petals.
Arcs, spirals, petals stitched according to the same rules as circles.
Arc stitching. The length of the stitches with which the arc is sewn must be less than half the arc. The shorter the stitch length, the thinner the arc image.
stitching spirals. Work begins from the starting point of the curl, the stitch length is selected from 3 to 5 punctures. Filling the spiral is done by moving towards the end point all the time in one direction.
Incomplete stitching of the oval (tear or petal). Work begins with the sharp end of the element, and embroidery ends there. The distance between two points is better to choose equal to the line tangent to the bottom of the petal.
When to Flash an Image like a fan from one point (for example, petals, buds, flowers), apply the “triangle stitching” technique.
Creation of tonal isothread.
The creation of tone isothread is, perhaps, the highest step in the art of thread design. The isothread pattern must be correctly composed, correspond to the purpose of the future product, the technique of its execution, be combined with the background and the environment. It is necessary that its details are correctly and beautifully placed, and the selected thread colors convey the volume of the depicted objects.
The whole variety of colors and color shades, their combinations are studied by the science of color science.
1. When “filling the corner” on the front side, the threads are pulled from one side of the corner to the other, on the wrong side - the stitches are located on the sides of the corner in the form of lines-strokes.
2. When "filling the circle" on the front side, a pattern in the form of an asterisk is obtained, and on the wrong side, the thread repeats the line of the circle.
3. If you need to lengthen the thread, then you can fix it from the wrong side and introduce a new thread from the wrong side to the face, or tie a new thread to the end of the old thread and continue working.
To make the thread less tangled, it is better not to measure it too long. If the trouble did occur, pull it back and try to dissolve it. At the beginning and at the end of the work, fasten the thread well. We use narrow adhesive tape, gluing thread trimmings and knots from the wrong side. You can avoid deformation of the cardboard if the thread is not too tight. But, if the thread tension is too loose, the pattern will turn out to be indistinct.
After finishing work, carefully seal the back of the postcard with white paper. The picture can be glued onto a larger sheet of cardboard with PVA glue. This results in a contrasting frame and hides the wrong side of the work.
Isothreading is not just a needlework technique, but a real art. Many of them are familiar with it from school. The technique will seem quite simple to master even for a child, so it is widely used in educational institutions. As a result of several hours of creativity, a unique picture of threads is obtained, ideal as a gift or interior decoration.
Isothread paintings: materials and tools
The picture, made with isothread, is an image of a complex interweaving of threads on cardboard. Embroidery is carried out with a needle according to a specially designed pattern. In the process of creating paintings, threads of various shades are used. The schemes are also different. To master this art, it is recommended to start with simple ones.
For beginners, schemes with numbers designed for children are suitable. You will also need a solid foundation. Most often, cardboard is used in this type of embroidery. It can be covered with velvet fabric. The base comes in various shades, however, needlewomen prefer to use a predominantly dark background. On it, a complex pattern made with isothread is more clearly and clearly visible.
Isothread picture schemes for beginners: master class and video
Beginners to master the art of embroidering pictures with isothread can start by making images of simple shapes: a circle, a square, a rhombus. In the middle of the figures, as a rule, either an empty space remains or a volume is created.
Any work begins with drawing on the basis of the picture. Then, along the perimeter of the image, it is necessary to pierce the holes and number them. Consider the method of filling a triangle according to a simple scheme:
- Pull the thread from the inside out from the point at the top of the triangle.
- Pull it to the mark located on the opposite side in the center.
- Bring the thread out of the adjacent hole and pull it in the opposite direction.
- Repeat steps 2 and 3 until the picture is completely filled.
The principles of filling circles, squares and rhombuses are the same. The figure is divided into the number of parts equal to 12. Then the markings should be placed around the perimeter with numbers. The thread is not pulled in opposite directions, but to points No. 1 and 11, 12 and 2, 3 and 13, etc.
You will quickly learn how to embroider with threads on cardboard according to patterns if you follow all the recommendations. To facilitate the task, we suggest watching a video with a master class on filling a regular-shaped circle with isothread:
Children's schemes with numbers for embroidery with isothread
Currently, a huge number of patterns for embroidery with threads on cardboard have been developed. Pictures for children are distinguished by the simplicity of forms and methods for filling in shapes. In the diagrams, it is imperative to put down numbers so that the child quickly masters the technique of this type of needlework.
Teachers recommend starting to create paintings using the Isothread technique from the moment a child reaches senior preschool age. Toddlers learn to independently count, plan and perform complex finger movements, which has a positive effect on the development of fine motor skills. Isothread contributes to the formation of creative abilities. Needlework of this kind develops imagination and fantasy.
Consider a scheme for embroidering a triangle with isothread with numbers.
It is also interesting to try to embroider a small circle with isothread according to the scheme with numbers.
Isothread was developed in the 17th century in England. Initially, weavers created patterns on planks, and carnations were used as fasteners instead of holes. The results of their work served as decoration for the interior.
Pictures with isothread are an excellent memorable gift for any occasion. Professional needlewomen create images of stunning beauty: landscapes, still lifes and even portraits.
Such a technique of arts and crafts as working with isothread has two easy-to-perform techniques: mastering embroidery on geometric shapes - a circle and an angle. Thanks to the wide imagination and irrepressible fantasy of two figures, you can come up with masterpieces worthy of the showroom. Paintings created using the streak technique are an unusual gift for a loved one, an excellent addition to the interior style and just a good mood on a dull day.
Paintings created using the technique of isothreading are an unusual gift for a loved one.
In practice, there are two types of scheme.
For circle
- On a sheet of thick cardboard, select the starting point - the center of the circle. Draw a circle with a compass. To determine the equal distance between future holes, we use a protractor. On the circle we make an equal number of holes according to the markings.
- We conditionally number clockwise from 1 to 16 without skipping holes. Following the instructions, skip the thread in sequence: from wrong side 1 to 3, return on the wrong side to 2, from 2 to 4, back to 3, from 3 to 5 and so on until the end of the circle. The pattern is good for embroidering the contour of curly images. In order to create an arc with the base, use a semicircle.
- The next pattern is obtained with long stitches, it is convenient when making ovals in the pattern. From designation 1 we count seven punctures, on the front side we make a stitch in the eighth. From the wrong side we go to the seventh and the front one goes back before the designation 1. The movement of the thread is counterclockwise. The ornament is ideal for embroidering a New Year's snowman, decorative elements in the images of animals, butterfly wings and bows.
- Now we make the same pattern with long stitches with a distance of five punctures. The center circle will be slightly larger, which makes it possible to make an internal ornament with stitches "through one" or obliquely.
For Angle
- We draw an angle of arbitrary shape on thick cardboard from the inside. On both sides of the figure, mark the same number of points at an equal distance. Pierce the markings with a pin, 5 punctures on each side.
- We number the points on one side from above - down from 1 to 5, on the other from below - up from 6 to 10, respectively.
- Filling out the schema. From point 1, stretch the thread to 6, along the purl to 7, from it the front thread to 2. Then down 3 and along the outer 8. Finish the pattern by fastening the end of the thread with a sketch from purl 10.
Gallery: isolate (25 photos)
How to embroider a circle with isothread: master class
Making a circle with isothread requires concentration and a sequence of actions.
Necessary:
- A sheet of thick cardboard;
- Threads of iris, floss;
- Compass, needle, awl;
- Scissors, glue, protractor.
How to do:
- Turn the cardboard over to the wrong side, draw a circle in the center with a compass. Using a protractor, accurately distribute the points around the circle with a pencil, taking the degree ruler as a basis. For example, every 10 degrees we put a designation.
- Carefully pierce the places of designations with an awl. Place a cloth or piece of wood under the cardboard to prevent damage to the work surface. To make the holes smaller, you can use a needle.
- Now mentally imagine a clock face. Where the number 12 should be, put the number 1 above the puncture, then clockwise number all the holes with numbers.
- Start work with the designation 1. From the wrong side of the paper, through the number 1, we stretch the needle and thread up to 5 from the front side. Then to 6 wrong side up to 2. Observing the digital order, from the wrong side, a circular seam is obtained, from the front side - a circular pattern like a multifaceted star.
- You can’t tie knots, pulling together, the thread deforms and spoils the image of the picture. Fasten the ends of the thread with glue.
There are options for other circle patterns:
- Stitch equal to the diameter: Inside the figure, measure the center, put a point. Poke a hole from the inside with an awl. Then, from purl 1 along the front to the center point, stretch the thread, return to purl 2, from it along the front to the center and again return to the bottom by 3.
- Equal length stitches: Mentally divide the circle into a clock face. Where the number 12 should be, we retreat on the wrong side to 11, from it the front thread to 5, on the wrong side from 5 to 4, from 4 front up to 10.
It is very important not to stray from the sequence of designations, before making a seam, consider the location of further numbers.
Isothread embroidery on nails for preschoolers step by step: how it is
Such crafts look spectacular, creating visual volume by raising the thread above the surface of the base.
You will need:
- Small carnations with hats;
- floss threads;
- Wooden board or plywood sheet;
- Drawing template, hammer.
Such crafts look spectacular, creating visual volume by raising the thread above the surface of the base.
How to do:
- Having chosen a drawing for a future masterpiece (print new schemes), fix it with a strip of tape on the work surface.
- To maintain the exact distance between the nails, use a pencil to mark the base. Drive in nails at the points of the contour borders. Remove drawing.
- At the end of the thread, form a loop, throw it over the nail of the first corner, scroll around the mount. Then stretch diagonally to the opposite carnation. The technique of isothread on nails allows you to form a pattern both in a certain sequence of applying a thread, and in a chaotic manner.
- Perform the work clockwise, without violating the order of the threads.
At the end of the execution, fix the end of the thread with glue.
Isothread: star for children
You will need:
- A sheet of thick paper;
- Threads of iris or floss;
- Pencil, ruler;
- Needle, awl.
What to do:
- Draw a symmetrical star on the wrong side of the sheet. For the initial basis of the drawing, we take the upper ray of the star. The vertex point of the beam will be conventionally denoted by the letter A. From the designation down the sides of the corner, count an even number of points. For example, five on each side, for a total of ten. We denote them by numbers from left to right.
- Make holes with an awl at the point designation. I got a diagram of the drawing.
- From the inside of point 9, stretch the thread to the top of A. then return from A to point 2 and down to point 7. Accordingly, from 7 to 5 we move on the wrong side, on the front side from 5 to 4. From 4 to 6 down the wrong side. From 6 to 3 on the front, from 3 to 1 on the wrong side and up to 8. From 8 to 10 and to top A. According to this scheme, gradually make all the rays of the star.
- After finishing the embroidery of the corners, you can come up with an original image in the middle of the star. For example, here we use the technique of embroidery of equal stitch length.
Just keep in mind the obligatory nuance - in order to prevent mixing of graphic styles of the drawing, it would be more expedient to make some deviation from the punctured holes of the original image.
How to make a snowflake isothread
The snowflake pattern will be very easy for inquisitive and restless needlewomen.
The thread graphic of the image is a circle or square, from the middle along the edges covered with a thread. Here the size of the seam can be varied, for example, one can be made larger, that is, outside the figure, the next seam is smaller, respectively, not reaching the edges of the image.
At the beginning of work on a snowflake, the kid will need the help of adults. Draw a square on a piece of paper with a center point O inside. From it we measure the same distance segments to the edge of the figure and beyond, alternating through one. In the marked places, we put the designations from 1 to 10. From 1 we pull the thread to O, then from O to 2, from 2 to 3 and back to the center point. If you follow the sequence of the pattern, the picture turns out a small snowflake. After finishing the drawing, with light movements, erase the shape of the square with an eraser.
The snowflake pattern will be very easy for inquisitive and restless needlewomen.
The second option for embroidering a snowflake involves sheathing the contours of the pattern with a stitch “through one” (1-3,2-4). Inside the contours, you can decorate the image with beads or sequins, weaving them into stitches.
The idea of executing a snowflake according to the principle of corner embroidery is more complex. You will need:
- Cardboard or velvet paper;
- Scheme of an octagonal snowflake (from the Internet);
- Colored threads of wool, acrylic, iris;
- Pin, needle, tape, paper clips.
How to do:
- Fasten the pattern diagram to the cardboard with paper clips, pierce holes in the image with a pin.
- We conditionally number the corner of the snowflake, the number one is the end of the segment from the beginning of the corner, then down to the beginning of the corner. The other side of the number is from bottom to top, for convenience we denote from 9 to 1.
- We make the first seam from the inside 1, fixing the tail with tape. From 1 we go down the thread to 9, return to 8 on the same side and to 2 on the next side of the corner. Fill in the corner consistently, without violating the order of imposing threads.
- Follow this principle to complete the remaining corners of the snowflake.
monkey thread
To make an image of a monkey, you need:
- Threads for embroidery or floss, iris of appropriate shades;
- Colored cardboard (green under the lawn), a sheet of thick paper;
- Needle, scissors, glue, pencil, pin.
How to do:
- For the picture, you need to take a drawing of a monkey. You can copy it through a carbon paper from a coloring book or find it on the Internet.
- To make the picture have a wrong side, copy the figure of the monkey through the glass. Transfer the inverted image through carbon paper to the wrong side of the background cardboard.
- Pierce the contours of the figure with a pin.
- The tummy, the inner parts of the paws, the ears are embroidered with yellow thread as a circle. We sew the contours of the pattern in brown with threads with a stitch “through one”. The peculiarity of such a stitch is that the distance between its beginning and end is one puncture. That is, if we conditionally divide the punctures into numbering, we get the stitch length 2-4, skip 3, skip 5-7, skip 6. In the second round, we capture the missed holes, skipping already 2, 4, 5, 7, respectively.
- Nose, eyes are embroidered with black thread.
You can add decorative elements to the picture, for example, embroider a ball next to the monkey with beads or make eyes in the form of black buttons.
What kind of creative work with paper does not exist. Cutting various figures, origami, quilling. And now here's another and isolate.
Isothread is embroidery on paper. The point is pretty simple. Threads of different colors are stretched on paper and cardboard, various ornaments are created with the help of weaves.
Read also:
A bit of history
This art originated in England in the 12th century. Weavers came up with the idea of twisting threads in a special way. They took two planks, made holes between them, stretched out the threads and intertwined them together. We got very beautiful openwork things. Scarves, napkins, scarves.
But these products were affordable only for rich people, the poor could not afford such a luxury. Now this technique is available to anyone.
How to embroider on cardboard?
It is wonderful that any person can master this art if desired: a man and a woman, an adult and a child. With this technique, you can do:
- various bookmarks for books,
- wall panels for interior decoration,
- isothread paintings,
- souvenirs,
- boxes,
- painted boxes,
- postcards, etc.
For any holiday or birthdays, you can make an original postcard, and most importantly, there will not be a second one like this.
Here tools required for isothreading:
scissors;
simple pencils;
thick paper;
white or colored cardboard;
thick and thin needles;
colored threads;
the ruler is small;
glue stick;
compass. 
The main stages of isothread for children
- We take cardboard colored or white. Some types of embroidery look great on white cardboard, and some only on color. It will be possible to embroider velvet colored paper, but first practice on a regular one. Velvet paper must be handled with care, it is not as flexible as cardboard and can tear.
- It is necessary to decide what we will embroider. We find diagram, redraw it on the back of the cardboard, or we can simply attach it on the back. We take a simple pencil, divide the pattern with dots into equal parts.
- We take a needle or a pin and make neat punctures instead of dots.
A beginner should make the distance between points larger, this will save time, however, the image will not be very voluminous. - In order not to keep the cardboard on weight when tingling, use available material on which you can put cardboard. It can be a piece of foam, linoleum, a wooden plank or plywood. If none of this is available, then take the usual stack of newspapers.
- Now we take a needle with which we will embroider, thread it. Threads can be taken any, except woolen. Shiny threads look more advantageous. A wonderful choice is floss threads, which have a huge number of colors and a solid base. Threads can be used in one or two colors, or several. It all depends on what you are going to embroider. But usually - for other purposes.
- We push the needle into the first hole made on the cardboard. We make a knot so that the thread does not bloom.
- Then we push the needle into the second hole and then we do everything according to the scheme. All knots will be on the reverse side.
Isothread - schemes for beginners
