From this master class you will learn how to decorate a metal base for a headband using wire, beads and beads.

To create an ornament you will need:

metal base for the rim;
white beads of three different diameters;
large transparent beads;
white beads;
crystal beads;
wire (3 mm);
pliers.

The essence of creating a headband is that you need to wind a lot of different branches, which then need to be assembled into one piece of jewelry. Get ready for the fact that you will need a lot of wire, so prepare a whole skein just in case.

Creating branches should not be a problem, as it is very easy to do. The larger the branch, the longer the wire you need to prepare for it. For the first option, we take a wire 25 cm long. We string the crystal in the center and twist the ends under its base. The length of the twist will be 1 cm. Then we form the side branches in the same way. We repeat the pattern and the arrangement of the beads according to the example.

In the master class, 5 types of twigs will be used. The first is triple, where each has 5 white beads, the second is triple, where each has 3 large transparent beads, the third - 5 pearl beads alternate with each other, starting with the largest, the fourth - as in the example and the fifth - triple, where in the center there is a branch of 5 beads, and along the edges along one of one large bead. The number of branches depends on how much product you need. You can make 5 branches of each type, then the product will be more sophisticated. If there are more branches, then the decoration will be more massive.

From these branches, we need to make a drawing, which we will lay out on the rim. It is better to initially lay it out on the table, and then take it on a branch, thereby you will evenly distribute the beads throughout the rim.

We retreat from the edge of the rim a few centimeters. We wind a very long wire on the base and hide the end under the top wire. Each layer should be very close to the previous one. That is, the wire should not be in a chaotic state, since we need to fix the branches very tightly.

We wind a few centimeters of wire and proceed to assemble the branches according to the drawing. Arrange the blanks as you need it. It is better to put them on top of each other to create volume.

Since last season, headbands have thoroughly entered the wardrobe of fashionistas. At one time they were an explosion on the catwalk, and now any of their variations are still in trend. In our article, you will learn how to make a bezel with your own hands without spending a lot of time and money. Everything is easier than it might seem!

How to make a Greek bezel with your own hands?

What you need: T-shirt, sharp scissors, T-shirt-colored thread, sewing needle.

Since we are looking at the most budget options, we offer the simplest: you don’t even need to go to the store. Our main tool is an unnecessary old T-shirt, which is not a pity. As a result, we will get a comfortable elastic band that can be used for hairstyles in the Greek style. So let's get started:

We start from the bottom of the t-shirt. We need to cut three to five ribbons from it. It is important that the ribbons are the same length.
We sew all five ribbons at the base, it is desirable, of course, that the threads be in the color of your T-shirt. Further, a simple classic braid is braided from five ribbons.
Once the braid ends, sew the ends together. Then we connect the sewn ends on both sides to make a headband.
Our accessory is almost ready, it remains only to hide the seams. You can use the same T-shirt for this. We propose to cut a small rectangular piece and carefully sheathe the place where the ends are fastened. By the way, for a similar rim, ribbons can also be bought in .

How to make a wreath of flowers on the head?

What you need: some ribbons (colors of your choice), sharp scissors, wire, some artificial flowers.

It is important to distinguish a wreath from a rim. Therefore, to begin with, it is imperative to measure the volume of your head. If you don't, chances are high that the wreath will just fall off your head. Based on the measurement, we carefully make a wire frame.
You can use any flowers for a wreath: only your finances and imagination play a role here. As a rule, good stylish options can be chosen among ordinary artificial flowers, which can be bought for a penny at any store. If we use a large flower, then be sure to cut the stem: this way you can quickly and conveniently push the wire through it to fix it on our base. If we use small flowers, then it is best to make several small compositions from them (from three to four flowers).
The last stage of work is fixing the flowers on the rim. For the best aesthetic effect, we recommend alternating them in tone and size.

To see clearly that it is really simple, watch the video with master classes "How to make a headband with flowers."

How to make a headband from ribbons?

What you need: a few satin ribbons (colors to taste), plastic headband, thread and needle, glue, sharp scissors, cotton pad, lighter, artificial flowers, wire.

We take a hoop and carefully wrap it with ribbons. The main thing is not to forget to periodically coat the ends with glue so that the tape is better attached.
As soon as the rim is wrapped with ribbons on all sides, you can attach several artificial (or even fresh) flowers to it. It is best to use a special wire for these purposes, on which the flowers will be attached.

How to make a hair hoop with ribbons with your own hands can be seen in this video tutorial.

Hair Jewelry made of polymer clay

What you need: polymer clay (you can buy it in specialized stores), glue, scissors, headband, toothpick, paper napkins, clear varnish.

Two colors of polymer clay are mixed - white and yellow. It is important that the color is uniform.
From a small piece of clay we sculpt a drop of medium size. The drop is not completely cut into four parts. Petals are molded from each part. For this purpose, you can use an ordinary toothpick.
By the same principle, we prepare flowers. We suggest using green clay. The edge of each petal is slightly pinched.
Let's get to the buds. We cut the drop, but do not open the flower. Ready buds and flowers are best put on paper napkins for a while until the clay is completely dry.
Next, we need a flat circle that is cut out of green clay.
It is best to glue ready-made flowers with a special gun or hot glue.
After the flowers, buds and leaves are fixed, they can be covered with a transparent varnish.

How to make a headband with stones?

It will turn out just a trendy option. It is not difficult to make such a headband, and most often it is called "in the style of Dolce & Gabbana".

What you need: as many stones as possible, ranging from pearls to large rhinestones (you can buy them in specialized stores), glue, a bezel (preferably a neutral color. If you find it, suede is ideal), a toothpick.

For convenience, we recommend using a small wooden board, on which you can pour a few drops of glue, with which we will attach the stones to the hoop. In order to apply glue directly to the stone, we use an ordinary toothpick.
Depending on what stones you have, it is best to think over the drawing in advance. In principle, creative impromptu will do. We begin to apply stones to the hoop. The most stylish and successful is considered to be a uniform distribution in the pattern of pearls, flowers of delicate tones and stones of the same tone (for example, silver). If you want to get really stylish hair jewelry with your own hands, then it is important that the result is not lurid.
Please note that the ends of the hoop do not need to be sealed with stones. About five centimeters can be left without decoration, they will still hide behind the hair.

DIY hair accessories with stones - in the next video tutorial. Look, it's really helpful.

Headband with organza flowers

What you need: organza (colors to taste), glue, headband, toothpick, sharp scissors, tulle, lighter.

We take an organza, from which we cut several circles. Please note that they must be of different sizes. The rule of a beautiful organza flower is simple: the more circles of different sizes, the more magnificent and impressive the flower will turn out.
A lighter is needed in order to carefully burn each blank along the edges. Organza is a specific fabric that tends to spread. If the edges are burned, then this will not happen.
Let's get to the tulle. You need to cut a couple of squares. Their sides should be equal in size to the circles already cut out. The squares need to be folded in four, and then cut off along the edges. So the expanded square will take the form of a circle. We fix all the blanks with glue.
The flower is almost ready, it remains to gracefully outline its center. You can add one or more pearls. We also attach the flower to the rim with glue.

Useful links for you:

Our fashion blogger has inspected more than one hair accessories store. As a result, I chose the best: in a fashionable review, it is presented for any occasion. Here are the prices, photos and addresses of stores where you can buy them.
In order to make a hair band with your own hands, you will need a lot of additional details. Our author in his list indicated all the best shops for hand-made. Stones, beads, ribbons, wires…. Everything you need at reasonable prices.
In our catalog you will find almost all the shops in Minsk that sell accessories. See link.

Content

Spring always awakens in people notes of creativity, inspiration, causes a desire to dress up, preen. And that's good, and that's great. And the best part is that we can always make jewelry and accessories with our own hands. Let's, for example, create a beaded headband today - it turns out very gently and in spring.

Jewelry with crystals

This decoration is easy to make, but looks very chic. We will need:

finished bezel, covered with velvet or velor;
various crystal beads;
needle with thread.

In fact, the master class is very simple. You need to thread a transparent thread into the needle, if possible, even a very thin fishing line will do. And in a chaotic manner, you need to sew beads to the base. Why is it important that the headband be covered with velvet? Yes, it’s just that it’s easiest to sew decor on such a basis. You can glue the beads, but then you need to use the most transparent glue.

Try to lay out the beads in advance in order to have an idea of \u200b\u200bthe future pattern.

As a decor, in addition to transparent beads, you can use decorative small flowers and various textile bows.

Delicate accessory with beaded decor

For such a sophisticated decoration for a girl or a young girl, you will need quite a bit of time and materials:

a pack of plain beads, choose delicate shades: pink, blue, cream. You can also decorate the bezel with glass beads;
blank in the form of a thin metal hoop, you can order it in any hand-made online store;
scissors or special wire cutters;
wire.

It will take no more than an hour to make an accessory. So, you need to cut off a long piece of wire and fix it on the base. Like this:

A short piece of wire, then hide under the decor on the outside of the base. Now you need to string a few beads on the long end so that their width matches the width of the head jewelry. Now, as it were, we wrap the hoop with our beads. You need to do so many such steps until you cover the entire workpiece.

If you have made a similar hoop before, then you understand why the fishing line was chosen, and not the glue - the design in this case holds more securely and looks more voluminous.

We fix the end of the wire in the same way as at the beginning and hide the remaining piece under the beads. This is how beauty should be.

Luxurious head decor for a special occasion

We are talking about a headband in the style of Fashion week or a head decor worthy of Hollywood stars. We will make this decoration from beads and stones. Let's get stuff:

large pearl beads;
small pearl beads;
large Czech beads;
the basis;
glue.

For this decoration, you can use a wide plastic bezel, which can first be wrapped with black satin.

You can glue the beads in a chaotic manner, but observing a certain pattern in the meantime. Large beads of beads can first be strung on a fishing line and formed from them into something like a flower, curls or other shapes, which are then glued to the base in the same way.

Such rims can be made using decorative flowers, large stones a la diamonds and various other, one might say, improvised means.

Embroidery technique

The situation is a little more complicated with a rim embroidered with beads.

For such a chic decoration, you will need a base on which we will create embroidery, after which we will attach it to the headband.

The basis for embroidery can be felt, on which you need to draw patterns in advance, according to which embroidery will be done.

It is better to decorate the product using a thread and a needle, but it is better to glue large parts. Beads do not have to be sewn one at a time, it is enough to string a few things on a thread and sew, as shown in the photo:

After the base is ready - all the details are sewn with high quality, each piece of felt is decorated with beads, the product can be cut out in the shape of a rim and glued to the base.

On the wrong side, so that no flaws can be seen, you can also glue a piece of dense fabric. The result should be such a wonderful accessory made of beads and beads.

As you can see, you can decorate the base not only with large beads, but also with large cabochons, special petals and flowers made to look like natural stone.

A few tips on how to make a beaded headband neat and durable:

if it is possible to sew on beads, do it better, glued beads can quickly fly off;
for the base, use a rim covered with velvet or a rag base;
a handmade beaded rim always looks original and exclusive, especially if you approach the material and colors with imagination;
do not limit yourself to only beads and beads, in your arsenal - shreds, stones, pearls, glass beads and other decor;
use high-quality beads, suitable Czech, large diameter;

Bead - a project dedicated to beads and beaded needlework. Our users are novice beadmakers who need tips and support, and experienced craftsmen who cannot imagine their life without creativity. The community will be useful to anyone who has an irresistible desire to spend their entire salary on bags of coveted beads, rhinestones, beautiful stones and Swarovski components in a bead shop.

We will teach you how to weave very simple jewelry, and help you understand the intricacies of creating real masterpieces. Here you will find diagrams, master classes, video tutorials, and you can also directly ask for advice from famous bead makers.

Do you know how to create beautiful things from beads, beads and stones, and do you have a solid school of students? Yesterday you bought the first bag of beads, and now you want to weave a bauble? Or maybe you are the head of a reputable printed publication dedicated to beads? We all need you!

Write, tell about yourself and your work, comment on the entries, express your opinion, share tricks and tricks when creating the next masterpiece, share your impressions. Together we will find answers to any questions related to beads and bead art.

How to make a bezel with your own hands? Such a question came to my mind not because I cannot buy it from craftswomen, usually I did this before. But for example, on the eve of a trip to Greece. a couple of hours before departure, I wanted to have a lavender headband. After 12 at night where to buy it, if the plane is in 3 hours? There was a lot of artificial lavender at home, I found a rim, that's what happened. This was my first experience in making a headband with my own hands. He fulfilled his function. Looked quite nice.

But today I have a creative impulse again, and I will show you what I did step by step! There are many options, but how it will look visually, I will show in one of the entries.

Today I will show you a wreath of beautiful flower beads.

Time for work: half an hour-2 hours, depending on the painstaking work.