Quite simple in execution, but neat, comfortable and cute, a crocheted hat with ears will warm the baby and protect against cold and colds. The loops are calculated for a head circumference of 52-54 cm.

What to take:

Hook number 3
Yarn "Romance" No. 005 beige (Kamteks) 100 gr.
Yarn "Romance" № 063 chocolate 50 gr.
Two large wooden beads

Crochet hat with ears, master class

The general rules for knitting any hat are quite simple. According to the chosen scheme with or without a certain pattern, you need to tie a circle with a diameter of twelve centimeters. After that, rows with and without increments are knitted in turn until the product equals the girth of the head. Then the loops are no longer added, there is an even canvas. In order to knit a hat for a boy "Coffee with milk" you need to focus on the same system.

Work begins as follows:

Five air loops are recruited, connected into a ring, tied with eleven double crochets. From the next row, the number of loops is constantly increasing. The seventh row is already performed without adding loops. Here's what should happen:

For a head with a girth of 52-54 cm, further increases are not needed. If the size is larger, then the eighth row should be done with an increase in every sixth loop of the base, and the ninth row should be knitted without changes. And so it is repeated until the desired size of the cap is reached. For the size taken here, without addition, six more rows are performed. Everything, the base for the cap is ready, its diameter is seventy-nine loops:

Now you need to take any thread of a contrasting color and outline the boundaries of the future visor. This is twenty-five loops.

If the visor and ears are planned to be made in the same color as the hat itself, then not one, but two skeins of yarn should be taken, that is, 200 gr. If they are contrasting, you can pick up any thread of the same thickness. The visor is made according to the following scheme:

In this hat, the first two rows are made with the main color yarn. The next two will be connected with a darker shade.

In order to tie the ears, you need to step back from the visor in each direction, four loops of the base. Fourteen loops are made with single crochets. The first two rows go without changes, in the third you need to reduce the number by knitting together two columns in the middle of the eyelet and from the far edge. As a result, the part will turn out to be slightly beveled, so that it is more convenient to tie it, and nothing is bulging anywhere. In the fourth and fifth rows, three columns are tied together from the edge, in the middle there are still two. Ready-made ears, a visor and a hat are tied with half-columns without a crochet.

Here is what the product looks like:

For ties, it is enough to tie two chains of air loops, having previously threaded a bead onto the thread:

Almost finished thread:

To prevent the bead from falling, two or three knots are tied on the tail.

If desired, you can leave the fringe. Here is the hat:

In principle, you can leave it like this or add a pom-pom made of dark-colored yarn (see how to do it):

The finished hat for a boy is knitted quite quickly thanks to the thick yarn and the size of the hook, it is very practical, comfortable and beautiful.

How to crochet a hat

With the help of threads and a hook, in addition to the mass of other various products, it is quite possible to create hats of almost any model and shape. It doesn't matter if it's a sports hat for men, or a classic women's hat, or a funny and fancy hat for a child.

Knitting this will be very easy, perfect for all crochet fans if they can master some specific little tricks and secrets involved in making such a wonderful piece. So crochet.

Basic crochet: the process of knitting from the crown, separate motifs or wedges. And also from the bottom of the future product itself. Crocheting a hat for all beginners is recommended to be done from the top of the head, precisely for the reason that in this case, trying on everything will be much easier to do.

In addition, the workflow itself will be much easier. But the knitting of such a hat from the rim must be carried out in an extremely careful manner, while strictly adhering to special calculations and a special scheme, so as not to eventually deform the product.

Obviously, before crocheting a hat, it would be best to make a pattern for the future product, having previously taken each necessary measurement. The list of these measurements will include the girth of the head in order to calculate the width of the future product, the length along a special line running from the beginning of the neck to the forehead, in a special way for the depth of this product. A couple of centimeters should be added to fit the width of the product freely.

Actually, for a simple hat without ears, the rim should be crocheted one size smaller than for the entire other part. For all hats that will be up to the middle of the ear, you need to add a total of exactly two centimeters.

Well, if the product is tied to the lobe according to the plan, then you will need to add three centimeters. In order to create a crochet hat from the crown, you should, first of all, learn. If the method of knitting the hat from the bottom up was chosen, it would be best to take a pattern that will be easier to do.

Various crochet hats

Crochet baby hat with ears

It is possible to knit this hat for the smallest children, under the age of one year old, or for children who have just been born. For example, as a special kit for their discharge from the maternity hospital. And for this product, it is worth preparing a 2.5 hook and cotton yarn. This hat should be knitted from the crown, and after that a rim and ears are imposed on it, in accordance with the following scheme:

Children's hat with ears scheme

Description of the workflow

First you will need to knit a circle for the crown. In a special way for this, you need to knit 15 s / n in a ring from a chain that consists of five loops, make 3 ch at the start of each of the rows. especially for lifting, and in the end, make a connecting type loop.
Second row. In each of the loops you need to knit 2 tbsp. s / n.
The third row, in which it will be necessary to repeat (in each of the loops 2 st. s / n., 1 st. s / n, then one convex relief column, 1 st. s / n., 1 convex relief column from one next loop ) exactly seven times, and finish row 2 tbsp. s / n.
Fourth row. In this series, as in all the following, up to the eighth of Art. s / n., will have to knit Art. s / n., and from the relief pillars 1 tbsp. s / n., one convex embossed.
From the ninth to the eleventh row. Above st. s / n. should be knitted. s / n above the columns of the relief type, namely the relief ones.
Twelfth row. Two relief pillars should be repeated, skipping the loop of st. s / n, two vp, art. s / n twice (exactly two loops of st. s / n, 2 vp st. s / n) skip the loop) eight times.
Thirteenth row. It is necessary to repeat (two relief columns, skip one loop, three times 4 tbsp. S / n in an arc of two loops) eight times.
From the fourteenth to the fifteenth row. It is necessary over st. s / n knit st. s / n, above the columns of a relief type, the same relief. And at the next stage, you need to knit in turn, the ears. It is necessary to count exactly nineteen loops, starting, moreover, from the middle of the circle, and exactly from twenty loops, begin to knit this part of the entire product. At the start of each of the rows, you need to do 3 ch.

We knit ears

First row. It is necessary to knit 17 tbsp from each loop. s/n
Second row. Starting from the second loop, you need to repeat knitting (st. s / n, ch, st. s / n skip two loops) four times, and the last of the loops cannot be knitted.
Third row. It is necessary to knit four times from all the arcs of the previous rows exactly 4 tbsp. s / n, and in the last of the lifting loops, make 1 tbsp. s / n.
From the fourth to the seventh row. At the beginning and at the end of the row, decrease by knitting 2 tbsp. s / n together Art. s / n, and knit the remaining loops st. s / n. At the very last step, you need to attach special laces to your ears, which were connected precisely from air loops.
The edge of the hat with ears should be tied with a crustacean step. Immediately after these manipulations, the hat will be completely connected.

baby hat

For all those who are not too well versed in the process of crocheting stitches, there is a special plate with a good example of a description of the process of creating a crochet stitch, as well as a half stitch and an embossed or connecting stitch.

How to make columns

Another example of knitting a baby hat and also a detailed description of the process for creating it is discussed in the video below:

Crocheted men's hat

This model must be knitted using separate wedges. The main advantage of this method is that in a situation where the product turns out to be too large or, conversely, small in its own volume, it will be enough to tie up only one or a pair of wedges, and not redo the entire cap as a whole.

Crochet men's hat

However, for this feature, the header will be divided into more individual sectors. And the main stages of such a workflow will be such stages as:

Creation of a special sample for calculating the volume and height of the product itself;

Calculation of the volume and height of the product

Calculation of the required number of loops and scars using special formulas:
Number of stitches in knitted swatch x head height/horizontal length of swatch = number of stitches for total fabric.
Number of scars in sample x value related to head circumference/total vertical length of sample = total number of scars.
After all this, it is necessary to determine the number of wedges from which the product will subsequently be created, and the calculation of the width of these same wedges. And for this you need the total number of loops, divided by the number of wedges.
The next stage is marked by the transition directly to, according to the following scheme:

Parts diagram

The very first row. You need to dial the required number of loops and make one loop in a special way to lift the row. And in each of the loops of the chain, you need to knit exactly one column.

The second row, exactly like all subsequent even rows, also needs to be started with a lifting loop and knitted to the floor with columns, but up to the penultimate of the loops.

The third row, like all odd rows, must be knitted in exactly the same way as the very first of the rows.

So, the wedges are knitted to the desired height, and the floor columns are knitted along the edge of the untied loops.

And at the final stage, all the wedges must be interconnected by means of a special hidden seam, and the product must be neatly pulled together along the edge of the crown.

Product tightening

Crochet summer women's hat

For the summer, as a wonderful addition to a light wardrobe and a wonderful entertaining accessory for all little girls and adult girls, it is quite possible to knit this hat:

flight cap

Knitting is best done with thin yarn. For example, mercerized cotton. For those girls whose head circumference is 53 ± 2 cm, you will need approximately fifty grams of the named yarn. And the product itself will be created precisely from the rim from the bottom up from a certain combination of a simple pattern from Art. b / n and also a “shell” pattern, which is knitted according to this pattern:

Summer hat pattern

1 needs to be repeated (3 tbsp. b / n., 3 ch., skip three loops);
Row 2, exactly like all other even rows, must be repeated (3 st. s / n., 1 ch., 3 st. s / n.) in the same arc that refers to the previous row;
3 and all other odd rows, it will be necessary to repeat the pattern: (3 ch, 3 st. s / n.) In an arc of exactly 1 ch. previous row.

Knitting a ring from 130 v.p.
Knitting one row of the shell pattern and, starting from the second, repeating in accordance with a certain pattern, the pattern in a circle for fourteen rows. So, the canvas of the product should raise to a height of exactly nine centimeters.
After these actions, the pattern should be changed to a simple one. In a special way, for this, in the very first row of the transition, you need to knit in single crochet stitches without double crochet, and in an arc of three loops, 2 tbsp. b/n. As a result, in the next row it should turn out exactly one hundred and thirty loops.
Starting from the next row, you should begin the process of forming the crown by performing special reductions. It is for this that in this row, it will be necessary to find the thirteenth loop from the beginning of the row and knit it with the next loop together with art. b/n.
After that, the decrease of exactly one loop must be done through the row, exactly above the decrease of the previous row. And all decreases must be done exactly until ten loops remain in the row. And the next row needs to be knitted two loops together, getting five loops, which in a neat way, need to be collected and pulled together using a working thread and a hook.
Especially so that the hat does not begin to wrap around the edge, you should tie it with columns without making a crochet.

It is often believed that in the wardrobe of any woman, there should be at least three different models of different hats designed for each of the seasons of the year. And the kids, moreover, also need hats to change. For this reason, learning to crochet a hat will not interfere with any woman in this life.

Knitted amigurumi toys are a great way to entertain your child and teach him to knit. In technology or modeling lessons in schools, descriptions on knitting amigurumi toys may also come in handy.

In order to crochet any amigurumi toy - a kitten, a dog, a fish, an owlet and others, you will need to learn how to crochet a ball, knit triangular, oval or semi-shape ears, knit paws. That, perhaps, is the whole science. We talked about how to tie a ball earlier. Now let's take a closer look at the technology for making knitted ears for amigurumi toys.

So, how to crochet amigurumi toys

Triangular ears for crochet amigurumi toys

1. Perform 8 air loops.

2. Knit 2 lifting air loops and a row of half-columns.

3. In each subsequent row, decrease loops at the beginning and end of the row

How to crochet stitches:

1) At the beginning of the row: knit at the end of the previous row instead of a half-column 1 lifting air loop. And the last loop of the next row - in the 1st half-column of the previous one.

2) In the middle of the row: work from 2 loops of the previous row 1 half-column, then yarn over and pull it through all the loops.

3) In the middle of the row: work from 2 loops of the previous row 1 half-column, then yarn over and pull it through all the loops.

Other crochet techniques, including decreasing, adding loops, reading patterns, many master classes and video tutorials, you will find on our website in the section

4. After the 5th row, knit a circular row of connecting posts on all sides.

5. Tie the second ear in the same way.

Knitted amigurumi toys: pattern for triangular knitted ears

Knitted oval ears for knitted toys amigroomi with a description

1. Perform 5 air loops and lock them into a ring.

2. In the 1st circular row, knit 2 lifting air loops and 9 half-columns in a chain of air loops.

3. In the 2nd circular row, knit 2 half-columns in the 1st, 4th and 7th loops, 1 half-column in the remaining loops.

Knitted amigurumi toys: pattern for oval knitted ears

Semi-oval knitted ears for crochet amigurumi toys

1. Perform 7 air loops.

2. Knit 2 incline stitches for the 1st half-column and 1 half-column in the next 5 chain loops. Knit 5 chain stitches in the last air loop and tie the second side of the chain of air loops with 5 half-columns. 3. Knit 2 lifting air loops, turn the work, knit on the next 5 half-columns of the previous row, 1 half-column, then 5 times 2 half-columns in an air loop, 6 times 1 half-column in an air loop.

Round knitted ears for knitted toys amigurumi knit according to the pattern

According to the same scheme, the eyes of amigurumi toys are knitted.

Having studied in detail the techniques of knitting amigroomi, you can easily make various knitted amigroomi toys with a description that usually provides general information on knitting these little toys. Knitted amigurumi toys are not only toys for children and didactic material for knitting lessons, but also excellent souvenir gifts for relatives and friends for various holidays.

Also with the help of amigurumi you can change the bored interior. Arrange or hang these cute little animals around the room and you will have an updated children's room. If this summer you did not plan repairs in the apartment, but you still want to update something, then this method of interior changes will certainly suit you.

Hat with crochet ears

crochet hat with ears

Knitting notes. No. 1 Hat with closed ears

It is very easy to crochet this hat. Even for those who just took up the hook. I hope these notes help someone.

The main knitting techniques in our case are air loops, single crochets, double crochets, connecting posts.
1. Air loop (abbreviated - V. P.)

2. Single crochet (abbreviated RLS) .

3. Double crochet

4. Connecting post (loop)

First you need to pick up the yarn, having thought in advance how the colors and patterns will be arranged.

I knit with Pekhorka Romantic yarn (100% cotton) 100g per 200m. Here is such.

It is thinner than the yarn from which the hats in the photo are knitted, and what is the difference - notice for yourself

So let's start
Chain 4-6 stitches (this depends on the thickness of your chosen yarn)
Close the chain into a ring with a connecting loop
Next, knit in a circle, according to the selected pattern. Before starting each new row, perform lifting loops. For a row with RLS - 1 air loop, for a row with CH - 3 in. n. End each row with a connecting loop.
On the first scheme - knitting RLS, on the second - CH.

Thus, you need to tie a circle with a diameter of 12 cm, making increases in each row, then increase through the row until the circumference is equal to the desired size of the head for which you are trying

After this, you do not need to make an increase, knit a hat in a circle to the last (bottom row). Gradually, your circle will turn into a cap.

Fantasize, play with color, patterns.
After the cap is ready, mark the edges of the lugs with a contrasting thread.
The width and height of the ears is a matter of taste.
After attaching the thread, knit the first row of the eyelet, turn the product over, make lifting loops and knit the next row. Make decreases according to the desired size of the ear, for example, this diagram.

And here's what happened to me

Having finished with the ears, we make the binding of the edge. I chose fan tying for this hat.

Often use reception with single crochets.
Next, we make strings, we stretch the threads to the lower edges of the ear and weave a pigtail, fasten it with a knot and cut the ends

Comments

Hat with closed ears crochet
Hat with closed ears Knitting such a hat is very simple. Even for those who just took up the hook. I hope these notes help someone. The main knitting techniques in our case are air loops, single crochets, ...
Beanie with closed ears.M.K.internet
http://www.stranamam.ru/post/1208950/ From the diary of MonikaPetrovnaIt is very easy to knit such a hat. Even for those who just took up the hook. I hope these notes help someone. The main knitting techniques in our case are air loops, single crochets, stitches with ...
Beanie with closed ears
The main knitting techniques in our case are air loops, single crochets, double crochets, connecting posts. 1. Air loop (abbreviated as ce) 2. Single crochet (abbreviated RLS). 3. Double crochet stitch 4. Connecting stitch (loop) For...
Crochet hat for girls (diagram and description)
Head circumference: 50 cm. Yarn: "Ivushka" Semenovskaya yarn (50% cotton, 50% viscose, 430 m/100 g). Hook: No. 1.5 Description: Crochet hat for a girl We start knitting a hat from the crown. To do this, fold the thread into a ring. 1...

On the eve of the holidays, mothers and fathers, grandparents are often puzzled by the question of where to get costume for a child for the new year? Are you familiar with this? I think yes, if the child goes to kindergarten or school. But what if you yourself want to look unusual at some theme evening? One of the most common costumes is the cat costume. The thought immediately arises where to buy cat ears? But ears after all can be made by yourself! The next question is “How to make cat ears?” Since we are learning to knit, the ears will be knitted.

So, today we will do handmade cat ears And not just ears, but also in the form of a rim. 😉

Complexity: knitting for beginners.

We will need:

- hook number 2.5;

- pink and white (gray) yarn. I have a Soufflé of Semenovskaya yarn and the rest of the yarn is a little thinner than Semenovskaya, it is better to use the same ones;

- a bezel that suits you in size, preferably thin with serrations;

- a needle with a wide eye;

- scissors.

1. We start with the pink part of the ear, do

3. Yarn over and into fourth st from hook

8. We knit a column with one crochet not to the end, we make a crochet

11. We stretch the working thread through three loops on the hook. Thus, we performed a decrease at the end of the row

14. We perform the reduction in the next two columns. The third and last column of the previous row is left. Thus, we will perform a decrease at the beginning of the previous row

A simple hat with crochet ears. Hat with crochet ears, diagram and description