DIY crafts on the theme of winter in kindergarten for the competition: step by step photos. Crafts and figures from snow in kindergarten: a photo of how to do it yourself Winter crafts in kindergarten

With the onset of winter, all streets and playgrounds are covered with snow, mountains and dunes are formed in just a night, and the time for winter games comes. Snow is an endless source of fun and entertainment. Kindergarten teachers take snowfall very seriously. Snow time gives them a chance to organize interesting games with children in the fresh air, arrange a whole fairy tale next to the kindergarten. Children are very fond of this task and create amazing figures with their own hands.

The main types of figures

There are several types of snow figures at once that you can build with your own hands. According to the type of modeling, they can be divided into two types:

frameless - created from one snow;
frame - at the heart of such a figure is a frame made of wood.

Preparation for work is quite simple. Before you go outside and start creating a wonderful snow craft in kindergarten, you need to do some preparatory work still in the house.

Frameless snow figurines

Such figures are created exclusively from snow. This method is used when sculpting low figures, no larger than a person’s height, as well as a solid form without separate elements (spread wings or raised arms - this should not be).

If you want to create several figures at once, then the snow for them must be collected in advance. It is necessary to collect for several weeks, for which the snow masses are raked with a special shovel into the formwork or into another container suitable for this. You can collect such snow with the whole group, together with the children. This will help prepare for the upcoming fun. The snow that has been compacted for some time becomes more durable, so it becomes much easier to work with it.

To understand whether snow is suitable as a material for creating figures, one should press on it from above with some kind of sharp object, if the tip easily enters the mass, then this means that the snow is not yet ready for modeling. When creating any snow crafts in the kindergarten area, you must always remember that snow is suitable for it only completely clean, without excess dirt and debris, otherwise the figure will be unattractive, and it will be very difficult to sculpt individual parts on it.

Creating single figures will help to collect snow before the work itself. To do this, as when sculpting a snowman, the snow rolls into large clods, which are then placed on top of each other. Such a game will help captivate the whole class or children from kindergarten. Supplement the constrictions, if necessary, with snow. You can collect it in this way only if it is rather sticky.

If the snow has a crumbly shape, then it can be made sticky, for this you need to pour water on it, quickly shovel it into a pile with a shovel and squeeze it well, in this case the snow mass will quickly seize under the influence of low temperatures and become more dense. Sticky snow can also be raked into the formwork.

When the block is ready for work, they begin to draw it up. For this you need to use small tool - spatula, grater or scraper. If they are not there, then you can use improvised items, you can first take a wooden spatula from the kitchen and a knife from home. If the snow is not very hard, then you can start working with children's sandbox sets, but in this case you need to do everything carefully, if the snow is too hard, then the fragile plastic may break as a result, which will only bring the child experiences and frustration.

At this stage of work, a model of a figure made at home or a painted portrait will be very useful. Sculpt details should be from it, as from a model. To begin with, a general outline of the future figure is created, and then all the main details are completed.

You don’t need to be very upset if something went wrong, since snow is a material that helps to quickly restore the desired part of the figure, as well as redo an accidental defect.

Buildings with a frame

Creating a frame in snow figures from wooden sticks or plywood helps to capture them in different poses and make them more lively and interesting, which helps the child feel like in a real fairy tale.

This work will begin with the creation of the main frame. The frame in this case will serve as a skeleton, that is, the main support for the snow mass. Therefore, all the main parts must be installed precisely on the support, for example, the long neck of a swan will not withstand the load and can quickly break without a special skeleton. To do this, you need to combine all the wooden sticks and individual pieces of plywood in bunches or wire. At the same time, it is very important to give the frame stability and strength.

It is also possible to create a frame so that children use it as a structure for climbing, riding. In this case, it is important that the child does not fall during the game and is not injured.

After installing the frame, you need to fill it inside with snow, and also sculpt the base of the figure from the outside. To give strength to the frame of the figure, it should be lubricated from above with a special “snow dough”, for this the snow is half diluted with water. All parts of the figure are coated with such a mixture; after solidification, the structure becomes especially strong and strong. You also need to remember the importance of rubber gloves for such work. After all parts of the frame are disguised under the snow, and the blank reaches its size, you need to start adding different details to the structure.

At this stage, the work will be more like creating a frameless figure. The only difference will be the higher complexity of creating additional parts.

Ice craft designs

Ice figures are a separate direction in winter constructions. Transparent buildings, shimmering under the rays of the sun or in artificial lighting, look like real illuminations made of valuable glass.

It is not easy to create them, since ice is a very hard material, difficult to work with. At the same time, it is impossible to restore the breakaway section of the structure, so such work will require special skill and training.

To form such a figure, you need to use natural ice taken from a glacier or a reservoir. If you try to freeze tap water on your own, then it is unlikely to become transparent in color, and the figure will not look aesthetically pleasing. But for training, you can use this method.

Decoration of received structures

A simple sculpted figure is rather uninteresting, especially for a small child. The whole class will be happy to decorate the resulting work. They will be able to make the overall picture of the figure more vivid and attractive. With a brush, you can draw small details: mouth, nose and eyes. For coloring the building, you need to use only paints that are safe for the child, for example, watercolor. Gouache can also work, but after the snow figurine has melted, it will begin to paint heavily and can stain children.

Also, to decorate buildings, you can use colored figures that need to be prepared in advance by freezing water tinted with paint in special molds. Children can do this work on their own.

It is also good to decorate a snow structure with a cloth. To do this, you can use colored canvases or small shreds. In order for the fabric to be able to fix well on the figure, you need to use it wet, then, having frozen on the street, it will continue to retain its shape. Small patches can be attached to the structure with snow dough. You can also ask the children to bring such a fabric from home. It is good to use individual threads left after knitting, they will help attach unusual extensions to the sculpture.

Natural materials can also be used to decorate figures: hawthorn or mountain ash berries, as well as simple cones. Such decorations can also be prepared in advance.

How to make a doggy

Before starting to create, you need to accurately determine the size of the body and the location in space of the desired design, think through all the details of the appearance of the snow dog and in advance create a layout of a building on a piece of paper.

If you want to create a dog lying on the ground, then:

pile up the snow to design a lying dog;
moisten the collected mass from a watering can;
roll up a small ball and place it in the place where the planned head of the snow animal will be;
give the figures the features of a dog, special attention should be paid to the ears.

There are two ways to sculpt large snow structures. This:

from wet snow;
by rolling into small balls.

The second method is most suitable for sculptors who are not well versed in the modeling itself. For this you need roll two balls and process the design to give it common features with the dog.

When using the first method, before sculpting, you need to carefully process the material:

create a mountain of snow and moisten with water;
let the mass lie down for several days in the cold;
repeat the steps until the structure reaches the desired height;
remove excess snow and create dog features;
you can add additional colors or highlight the details of the exterior in a different way. For example, insert eyes in the form of coals.

Building a snow house

There are different types of snow houses. Of these, we can distinguish:

lock;
hut;
fortress;
needle;
a place for children's fun and active play;
decorative decoration for the site.

There are two main sculpting methods: pitched balls and cut out squares. Each of these methods uses wet snow.

To build a snow house, you need:

If the house was created for children's games, then it should be insulated inside with polyethylene. To do this, the material must be laid on the floor and attached to the walls of the building.

Snow mass minions

Making such figures from snow will be easy and fast. To do this, use a rectangle shape with rounded corners on top. Hair can be made from twigs, and hands can replace rigid plastic pipes, at the ends of which gloves can be attached. The main and interesting part of creating minions is coloring the finished structure.

An excellent stimulant is the needlework competitions held in kindergartens, in which the child must certainly take an active part.

The task of parents is to help the child complete crafts on the theme "winter" in kindergarten. In addition, by personal example, parents will be able to interest the child as much as possible by following a detailed step-by-step description of the process. This selection will allow you to choose the interesting crafts you like, which you will do with your child with great pleasure.

DIY winter crafts for children - the best master classes

The world of children's crafts is huge, the most successful craftsmen in this business sincerely share a detailed description of the manufacturing process with others. Our task is to choose the most interesting options for creativity and provide them for your convenience, which we did with great pleasure.

Santa's house

We will need:

white foam ceiling tiles with an interesting pattern - 1 pc.;
scissors;
glue gun;
finishing strip on an adhesive basis;
pliers;
ruler;
pencil;
New Year's silver tinsel.

Step by step:

On the reverse side of the foam tile, we set aside two times 15 cm horizontally from below, measure a height of 20 cm from these points and draw vertical lines.
At a height of 20 cm, we measure horizontally the middle of the resulting rectangles and set aside up 7 cm.
We draw roof lines on two parts of the house, then we draw a window, from the bottom it will be at a distance of 6 cm, as seen in the video.

On the free places of the foam tiles, we draw the side walls of the house, for which we draw two rectangles measuring 20 cm * 15 cm.
On one side surface we draw exactly the same window as on the front wall, setting aside 6 cm from the bottom, the window should be positioned, taking into account that there will be a door nearby.
We draw the door from three sides, the fourth side remains and is subsequently further strengthened.

We cut through the windows and the door using any tool at hand, glue the prepared decorative foam tape on an adhesive basis.

Using a glue gun, we glue all the parts of the craft on the theme of winter. We cut out two more rectangles for the roof of the house, 22 cm * 12 cm in size, glue the parts together, decorate the house with tinsel.

We use the remaining foam plastic as a stand for the composition, and also cut out, glue and install a table in the house with household items glued to it, a chair and a picture on the wall.

We cut and glue a bright “carpet” from a paper serving napkin on the floor, decorate the space in front of the house with tinsel, set up a Christmas tree and Santa Claus, previously printed and glued from paper.

Santa Claus from a fairy tale

We will need:

foam cone;
wire of medium thickness;
two types of fabric, a knitted piece for a hat and any other for a fur coat;
glue gun;
scissors;
a piece of faux fur;
decor elements.

Step by step:

We insert the wire into the upper part of the cone with our own hands, as shown in the photo.

We cut out a trapezoid from the main fabric, the dimensions of which will completely cover the surface of the cone, glue it.

From the knitted fabric, we cut out and cut out another trapezoid, a size that allows you to close half of the cone and plus the length of the wire, which will be the frame for the long narrow hat of the stylized Santa Claus.

We glue the "hat" by making a lapel. We attach any element of decor, a bell, a pompom, etc., to the very top of a narrow hat, and we also decorate the hat from below.

We cut out a long beard and mustache from faux fur, having previously drawn a stencil, which is very simple to do.

We glue the fur parts in the places of crafts in kindergarten, glue the eyes - beads and nose (the smaller part of the container from the Kinder Surprise toy).

You can make several of these figures to get a large company of the main characters of the New Year.

Original DIY crafts on the theme "Winter" for the kindergarten

It is safe to say that all handmade crafts are original. However, there really are those that are simply impossible to look at without a pleasant surprise.

Piggy bank from a plastic bottle

We will need:

plastic bottle 1.5 l;
acrylic paint white and pink;
scissors;
scotch;
glue gun;
tassel;
acrylic lacquer;
leg bushings.

Step by step:

From a plastic bottle we cut off the upper part and the lower part, connect them together with adhesive tape.

On one side of the bottle we glue 4 legs from any material at hand, small foam balls, large beads or lids from the Kinder Surprise toy container.

With a sharp knife or soldering iron, we make a hole for the coins, and also cut out slots for the ears.

We cut out the ears according to the stencil prepared in advance from a plastic bottle, insert it in place and fix it with glue.

We wind a thin strip from a plastic bottle on a thin stick, we get a tail, which we also insert into a pre-made hole, fix it with glue.

We cover the piggy bank first with white acrylic paint, and then pink, let it dry and cover with acrylic varnish.

We draw eyes and nostrils with a black marker, additionally decorate, a craft on the theme of winter in kindergarten is ready, we make a photo as a keepsake.

Snowman

We will need:

foam balls of various diameters;
glue gun;
felt of any color;
orange or yellow felt (small cut) or orange sisal and foam cone;
scissors;
a piece of thin foam;
semi-beaded eyes.

Step by step:

We make flat cuts on the foam balls for fastening, coat with glue and connect. On the large lower ball, we also make a flat cut from below for the stability of the figure.

We cut out small rounded parts from foam - handles.

We cut out a long strip from felt, cut a fringe at the ends, tie the resulting ball to a snowman for a competition in kindergarten.

We also cut out a rectangle from the same piece of felt, the length of which is equal to the circumference of the upper foam ball, cut a fringe from one edge, glue the cap and glue it in place.

We also cut out gloves from felt on the handles, glue them to the “handles”, which, in turn, are also glued in place.

From orange felt we make a nose - a carrot and glue it, we also glue the eyes - beads. If you prepared sisal and a small foam cone for the nose, then glue it first with yellow sisal, then glue it in place.

We finish the mouth with a black marker, cover the cheeks with a blush, using shavings from the lead of a red pencil. A do-it-yourself craft on the theme of winter in the kindergarten, as shown in the step-by-step photos, is ready.

You can put any additional items into the snowman's handles: Christmas toys, a box with a gift, a whisk, all this should be done additionally, which is not difficult at all.

Winter application - senior group

For senior kindergarten age, it is quite possible to offer for the manufacture of those applications that are supposed to be performed by primary school students. So it will be much more interesting for children, especially since the creative process is under the control of parents.

Father Frost

We will need:

colored paper: red, pink, black, white;
scissors;
stapler;
glue.

Step by step:

We fold the red paper with an accordion, determine the width of the strips yourself, make two such parts, glue the extreme sides.

We collect the accordion in a strip, tie it in the middle and unfold it, glue the sides of the accordion on both sides, we get a circle for crafts on the theme of winter.

We do the same again, only now we glue one red accordion and the other pink, cut off the ends of the resulting two-color strip to get a circle of smaller diameter.

We connect the two circles with a stapler, the pink side in the middle.

From white paper we cut out the edge for the cap, pompom, mustache and beard, glue it in place.

From large oval parts and small black balls we glue the eyes of Santa Claus, glue them in place.

From red paper we cut out and glue the nose - a small circle and the mouth - a semicircle, which we glue on the border between the mustache and beard.

Cut out a circle from black paper - a button for a suit, which we glue in the center of the red circle.

Glue a black strip below the center - a belt with a white buckle cut out of white paper. It turned out to be a very cute craft for kindergarten.

Application - postcard "Christmas tree"

We will need:

colored paper: white, blue, green, brown;
pencil glue;
scissors;
colored rhinestones on an adhesive basis;
red foil or shiny paper for gifts;
two colors of paper for gifts, stripes for decor.

Cut out all the elements for the application:

from green paper - three strips, sizes: 12, 10, 8 cm * 2.5 cm, crown;
cut out a trunk from brown paper - a cone for a Christmas tree;
from red foil - a star;
from the other two colors of gift wrapping paper - two rectangles of different sizes - gifts under the Christmas tree.

Step by step:

We make the postcard itself, for which we glue half a sheet of blue paper on the front side, cut off at the edges by 1 cm, on a double-folded sheet of white paper.

We glue the trunk of the Christmas tree on the postcard, glue the star on the top, continue the process of making crafts on the theme of winter in kindergarten.

For all green stripes, we bend the edges by 7 mm, glue them along the folded edges, placing them in the place of the crown of the Christmas tree.

We glue two gifts under the Christmas tree, having previously decorated them with ribbons and a bow.

We glue multi-colored rhinestones on green stripes.

Interesting! DIY: Beautiful voluminous paper snowflakes for the New Year 2019

Application - postcard "hare"

We will need:

white paper, blue, pink, black;
pompom;
double sided tape;
braid;
scissors;
figured hole punch;
glue.

Step by step:

We make the postcard itself in the same way as in the previous description, with the only difference being that figured holes are pre-punched on the blue paper along the edges, if there is no such hole punch, you can decorate the edges in a different way.
From pink paper we cut out a circle with a diameter of 8 cm, glue it in the center of the card, in the middle of the circle we glue two white circles - a muzzle.

We glue the ears on crafts in kindergarten for the competition, first large ones cut out of white paper, we glue the same ones on them, but small ones made of pink paper.
We glue the eyes: white circles, in the center of which we place small black circles.

We make a mustache from a strip of black paper, cutting a strip on both sides with thin oblong threads. We give the strip a bent shape and glue it in place.

Glue the pom-pom and ribbon bow onto double-sided tape.

Christmas tree 2

We will need:

colored cardboard yellow;
brown colored paper cone;
green paper;
double sided tape;
snowflakes;
red foil circle;
sequins;
scissors.

Step by step:

We cut out 2 circles from green paper, with diameters of 8 cm, 6 cm, 4 cm, bend each in half and glue it to each other at an angle.

On yellow cardboard, cut to the desired size of the postcard, we glue the pre-made trunk, then place on it and glue three levels of the crown from glued green circles.

From above, on a craft in a kindergarten on the theme of winter, made for the new year with our own hands, we glue a circle, glue rhinestones on green circles.

We glue snowflakes at our discretion on double-sided tape.

If desired, all postcards - applications can be decorated additionally.

Winter application - middle group, step-by-step execution with photo

We offer several master classes of applications for kindergarten, which are most interesting for this age group.

Application "Herringbone" from cells of egg trays

We will need:

cardboard egg tray;
colored cardboard;
PVA glue;
green paint;
tassel;
corrugated cardboard;
small foam balls;
scissors;
gold and silver cardboard.

Step by step:

We cut the tray into strips of cells, cut out 4 cells, 3 cells, 2 cells and one cell.

We paint the cells green, let it dry, while making a star at this time.

The star will consist of glued three stars of different sizes in descending order, the two extreme ones are cut out of golden cardboard, and the middle star is cut out of silver cardboard.

From corrugated cardboard we cut out the trunk of the Christmas tree, a small rectangle.

We glue all the details in place on colored cardboard, decorate free places with foam balls, which we also glue to simulate snow.

We decorate the Christmas tree for the competition in kindergarten with any shiny or multi-colored decor elements.

Christmas tree in the window

We will need:

colored cardboard yellow, red;
colored paper;
double sided tape;
scissors;
black marker;
glue;
buttons are white.

Step by step:

On yellow cardboard, draw two curved lines on top - the location of the future garland.

We cut out a window from red cardboard, having previously drawn it with a pencil.

We also cut out two strips of yellow paper 5 cm wide, and the length of the strips should match the length of your red cardboard window.

We fold the strips with an accordion, for which we bend them in half along the length, and then, turn each half in half again, iron the creases.

We prepare the layout of the Christmas tree, cut out a cone from green cardboard, place a red circle on top and glue the brown trunk. We choose the size of the Christmas tree so that it is commensurate with the window and all can be seen through it.

On the Christmas tree we glue multi-colored balls, previously cut out of colored paper.

We are preparing squares and rectangles - gifts made of shiny cardboard and decorated with colored ribbons and bows cut out of paper.

We stick all gifts on a strip of cardboard using double-sided tape.

We cut small circles from multi-colored paper, stick them on the drawn lines for the garland.

We glue the corrugated strips along the edges of the yellow cardboard.

We glue the Christmas tree and gifts to the cardboard on double-sided tape, glue the window on top, the voluminous craft is ready.

Application "Winter Forest"

We will need:

colored cardboard blue;
White paper;
shiny little stars or sequins;
white yarn;
pencil glue;
PVA glue;
scissors;
pencil.

Step by step:

On paper we draw a very simple landscape of a winter forest, three spruce trees of different sizes, large snowdrifts, a bunny. If drawing does not work out at all, then you can download such a landscape from the Internet.

We coat the white paper template with glue and glue it on the blue cardboard from below.

We cut the yarn into separate threads, collect them in a small bundle and cut them very finely with scissors.

Lubricate the entire winter picture with PVA glue using a brush.

Sprinkle the drawing, smeared with glue, chopped yarn, lightly press down, shake off the excess.

We decorate all the free space on the cardboard with shiny stars or sequins. If desired, you can additionally decorate the application with other elements.

Winter application - junior group

Applications for this age group are the easiest to make, excessive complexity should not scare the child away from the creative process. However, it is still necessary to make with the child that craft that interested him, we offer several interesting options.

winter city

We will need:

colored cardboard;
colored multi-colored paper;
scissors;
glue;
cotton pads.

Step by step:

We cut strips from colored paper in such a way that we get 4 long strips, the length of which coincides with the length of the cardboard - the base, and the width is calculated so that when they are glued to the cardboard, there are gaps of 2 - 3 cm between them.

We coat the long strips with glue and glue them, between them we glue shorter multi-colored strips of different lengths and widths, sticking them on long strips.

We cut the cotton pads in half and glue them on the roofs of the "houses", then we glue the pre-cut squares and rectangles of multi-colored paper - the windows of the houses.

At the bottom of the crafts for the kindergarten competition, we also glue halves of cotton pads - city snowdrifts.

Application "Pig"

Required:

pink and brown colored paper;
colored cardboard light pink;
part templates;
colored pencils and markers;
glue;
scissors.

Step by step:

We cut out the printed templates from paper: the body of a pig, a dress, ruffles, a piglet and a flower for decoration.

We put the pig's body template on cardboard, circle it and cut it out.

From pink paper we cut out a dress and a patch, and from brown paper we cut out ruffles and a flower.

On the details of the ruffle with a felt-tip pen we draw pink peas, we draw exactly the same pea on the flower.

We glue the dress to the body of the pig, glue ruffles and a patch on the muzzle from below.

With a pink felt-tip pen we draw hooves, holes on the nose and ears.

Draw a smile and eyes with a black felt-tip pen, apply blush on the cheeks with a light pink pencil.

We glue a decoration on the head of the pig - a flower, the application is ready.

Such an application can be presented to a kindergarten in its original form, or you can stick it on colored cardboard of any shape and decorate it with New Year's decor elements.

2667

DIY winter crafts for kindergarten. Crafts from paper, from snow and cones. Master classes with photos.

Origami

herringbone

What do children associate with winter? Of course, the green beauty is a Christmas tree! This tree is a symbol of the New Year holidays and a good cheerful mood. You can make crafts in the form of a Christmas tree in various ways and from various materials. For the youngest children, you can offer the option of making a wonderful spruce tree out of paper.

For crafts you will need:

1 sheet of cardboard
green paper,
glue,
scissors.

First of all, you need to roll a cone out of cardboard and glue it so that it holds its shape. It is best if one of the adults helps at this stage so that the base for the Christmas tree is even and neat.

Next, you need to cut out many circles of the same diameter from a sheet of green paper. It will be faster and easier to cope with this task if you fold the sheet into several additions, draw a circle and carefully cut along the contour.

Starting from the bottom, glue the cardboard cone evenly with green circles.

The result is a beautiful green Christmas tree, which can serve as a table decoration or become part of a large New Year's composition.

You can add decorative items to decorate the Christmas tree. For example, make small bows from thin satin ribbons and glue them in the form of toys. You can cut out small circles from colored paper of different colors and glue holiday balls on the Christmas tree, and make a decoration in the form of a red star on top. Another option for decorating a festive Christmas tree can be a string of beads, which will turn into a garland: one end must be fixed at the top and evenly wrapped with a string of beads around the cone to the bottom, where the thread should also be fixed.

Christmas trees in 5 minutes from tanush.livejournal.

Lovely winter applications made of paper and felt.

Snowman

In many kindergartens, walking time is reduced in winter, and sometimes, due to bad weather on the street, it is necessary to completely cancel access to fresh air. It would be a good idea to make a group application that will serve as an excellent decoration for the room and at the same time will allow you to develop the skills of working in one team, friendly mutual assistance.

The composition "snowman" is perfect for this, because an unlimited number of children aged 3 years and over can participate in its creation. Such work is also useful in that it is aimed at developing fine motor skills of hands in children. Actively working with their hands, kids activate the work of the brain, which affects the improvement of logical thinking and speech.

To create a snowman you will need:

sheets of white paper,
black, orange and blue paper,
scissors,
pencils,
glue.

Each child takes a sheet of white paper, a pencil and scissors. It is necessary to put your left hand on the paper, circle it with a pencil to get an image similar to a glove.

Now you need to carefully cut the resulting images out of paper. This will be the basis from which the snowman's body will be formed in the future.

It's time to use the glue. The resulting paper "hands" must be connected in the form of circles to make large, medium and small. To simplify the task, you can use a ready-made base in the form of a circle made of white paper, on which elements cut out by children are glued.

By connecting three circles together, you get a snowman. Now you need to add his eyes, nose and buttons. From black paper, you need to cut out eyes and eyebrows for a snowman, orange paper will serve to make a “carrot nose”. Buttons for a snowman can be made from beautiful carved snowflakes. It remains to add a warm bucket hat and a wonderful snowman is ready!

Snow crafts

Clearing the paths in the courtyard of the kindergarten and dumping all the snow into one big snowdrift, you can show creativity and imagination, turn an ordinary pile of snow into a Christmas tree! To do this, you need to lightly compact the top layer of snow so that the Christmas tree turns out to be even and beautiful from all sides.

You can already decorate a wonderful Christmas tree with your children, for this you need to dissolve green gouache in water, and then draw branches with a thick brush.

You can add different decorations to the Christmas tree, for example, holiday balls. To do this, it is necessary to cut out circles from bright pieces of matter. Attaching them to a snow spruce is very simple, it is enough to wet the fabric well in water and put it on the snow. At sub-zero temperatures outside, the water will quickly turn into ice and securely attach the balls to the snow.

snow caterpillar

A cheerful caterpillar can become an original decoration for a playground in a kindergarten. In order not to freeze on walks, young children need to move more, spend time outdoors actively.

The task of rolling up snow globes will be to the liking of many children, for such an active activity, time will fly by unnoticed. When the snow globes are ready, they need to be laid out in a curved line to make a caterpillar.

The first snowball will be a muzzle. Eyes, nose and mouth are conveniently made from plastic bottle caps.

You can decorate a cheerful caterpillar with paint dissolved in water, it is good to use gouache or food coloring. Such water not only allows you to color the snow crafts, but also perfectly fastens the snow balls together and gives the whole structure strength.

Crafts from cones

little people

Cones serve as an excellent natural material for making crafts.

To make funny little people from cones you will need:

cones,
wire in a soft winding - chenille wire,
plasticine,
paints,
plastic spoons,
ready-made eyes for making toys,
Double-sided tape,
cork from a plastic bottle,
universal glue,
scissors.

First of all, it is necessary to paint the cone well, for this, each scale on the cone is carefully painted over with a brush. Before work, the bump must be well dried so that the paint does not stain your hands during work.

Using glue, fix the cone in a vertical position in a plastic cover. When the glue has dried and the cone is well kept in the lid, the upper part of the cone is cut off with scissors, and the resulting recess is filled with plasticine.

From a white plastic spoon, you need to cut off the handle, leaving about 1 cm in length so that you can stick this part into the plasticine. Thus, the little man should have a face.

The next step is to work with the wire. To make hands for a little man, you need to cut two small pieces of wire about 5 cm long and attach them to the cone with plasticine. A warm hat for a little man can also be made from wire in a soft winding, for this you need to wind a piece of wire about 10 cm long in a spiral in the shape of a cone.

It is necessary to revive the little man, for this, the eyes are fixed with the help of small pieces of double-sided tape, drawn with felt-tip pens, or small balls of plasticine in the form of a mouth and nose are glued.

You can additionally decorate the little man with shiny snowflakes or stars, add a scarf around his neck. The result should be a cheerful little man who will bring a good mood and a charge of positive emotions for the whole winter!

When winter finally comes into its own, it falls asleep and covers all corners with snow, erects dunes and mountains in one night, the most fun time for the kids comes. Snow is an endless source of play and entertainment.

Kindergarten teachers take winter especially seriously. The snowy period makes it possible to organize excellent games with children on the street, arrange a whole fairy-tale land on the site near the kindergarten, make a whole entertainment complex only by the efforts of children and educators. Children are very enthusiastic about this task. They build amazing things with their own hands, which then become a place to play all winter long.

The easiest way to get a beautiful front lawn
Of course, you have seen the perfect lawn in the movies, on the alley, and perhaps on the neighbor's lawn. Those who have ever tried to grow a green area in their area will no doubt say that this is a huge job. The lawn requires careful planting, care, fertilization, watering. However, only inexperienced gardeners think so, professionals have long known about the innovative tool - liquid turf AquaGrazz.

frameless - consist only of snow;
frame - a wooden frame is installed at the base of the figure.

Preparing for work is easy. Before you go outside and start building a figure, you need to do some preparatory work indoors.

Come up with and draw a future creation on a piece of paper, drawing all the details as much as possible: nose, eyes, beard, braid, clothes. If these are animals or animated characters, then tails, wings, beaks, etc. You can ask the class at the drawing lesson to draw pictures of the characters they would like to make out of snow with their own hands, and offer them a specific topic for work. Or hold such a game with a garden group.
You need to draw not only the shape, for example, of the tail, but also how this tail will be located in space.
Then it is necessary to make small models of figures from plasticine. Such work will also captivate the whole, and not only the first, class and children will be happy to do it with their own hands.
If it is planned to create a whole composition from snow, then it is necessary to recreate with the help of layouts how these figures will be located in relation to each other.
When planning not only decorative elements, but also functional ones, such as a slide, a maze or a magic house that children can climb on, it is necessary to accurately calculate the dimensions of the future structure so that it is comfortable and safe.
To create wireframe figures, you need to draw their schemes.

Frameless figures

Such figures are completely composed of snow. This method is used to create low snow figures, no larger than human height, having a solid shape without separate elements (raised arms, spread wings, etc.).

If it is planned to make many figures, the snow for them must be collected in advance, within a few weeks, for which the snow is raked with a shovel and placed in a formwork or other container of an acceptable size. The whole class can collect such snow with their own hands, preparing for the upcoming fun. The snow that has been compacted over time becomes durable and easier to work with. To check whether the snow is suitable as a material for creating figures, you need to press on it from above with a sharp object, if the object easily enters the thickness of the snow, then the snow is not ready. When making any figures from snow, it must be remembered that only clean snow is suitable for them, without dirt and debris, otherwise the figure will be ugly and it will be difficult to fashion details on it.

Creating single figures allows you to collect snow immediately before work. For this, as well as for sculpting a snowman, snow is rolled into huge snowballs, which are then stacked on top of each other. Such a game will also captivate the entire class or group of kindergarten. Supplement narrowing points, if necessary, with snow. Collecting snow in this way will only work if it is sufficiently sticky. If the snow is crumbly, you can make it sticky, pour it with water and then quickly rake it into a pile with a shovel and compact it well, in which case the snow will quickly set in the cold and the workpiece will turn out to be dense. You can shovel into the formwork and sticky snow.

When a block sufficient for work is ready, proceed to its design. This will require a small tool. Suitable construction tools: spatula, scraper, grater. If they are not available, improvised means are quite suitable, you can first take a knife and a wooden spatula from the kitchen from home. If the snow is not very hard, you can work with a children's sandbox kit, but you need to be careful with it, if the snow is hard, brittle plastic can easily break, which will cause a huge upset to the child.

At this stage of work, a model of a figure made at home and a painted portrait will be required. You need to sculpt details from it, as from a model. First, a general outline is created, then the details are drawn.

The photo shows a figurine that still needs to be decorated.

It’s not worth being upset if something went wrong, snow is the material that makes it easy to restore and redo the resulting defect.

Wireframe figures

Creating a frame from plywood and wooden sticks helps to capture the figures in different poses and make them seem alive, allows you to embody the complex theme of any fairy tale with their help.. An example is visible in the photo.

Such work begins with the creation and installation of the frame. The frame performs the function of the skeleton of the figure, that is, the support for the snow. Therefore, all distant parts must be reflected in it, since, for example, the long neck of a swan will not withstand the load and will quickly break without a skeleton. To do this, you need to connect wooden sticks and pieces of plywood with wire or clusters. It is important to make the frame strong and stable.

It is also necessary to complete the frame for parts that can be used in children's climbing games so that the snow partitions do not collapse during the game and do not injure the child.

After installing the frame, it is filled with snow inside and molded outside. For greater strength of the frame figures, they are recommended to be smeared on top with the so-called “snow dough”, when the snow is half diluted with water and the whole figure is smeared with such a dough, after solidification the figure will acquire ice strength. Do not forget about the need for rubber gloves for this part of the work. After all parts of the skeleton are hidden with their own hands under a layer of snow, and the blank has reached the required size, it is worth starting to complete the details, as shown in the photo.

At this stage, the process is similar to working with a frameless figure, the only difference is the higher complexity of the parts being performed.

ice figures

Ice figures are a separate art. Transparent figurines, shimmering in the sun or in the rays of artificial lighting, look like an imitation of expensive stones or valuable glass (see photo).

It is quite difficult to create them, since ice is a very hard material and it is not easy to work with it. In addition, it is impossible to restore a section that has broken off incorrectly, so the work requires training and skills.

Ice to create such figures requires natural, taken from a reservoir or glacier. If you try to freeze tap water yourself, it is unlikely to turn out transparent, and the figure will not have the appropriate appearance. Although this option is also suitable for training.

The video shows how to make ice sculptures:

figure decoration

Just a white figure made of snow is boring, especially for children. The entire first class will be happy to join the game on the design of the resulting work. They will help make the winter picture brighter. Small details should be applied with a brush: eyes, nose, mouth. Larger areas are best painted with a spray gun. For coloring, use child-safe paints, such as watercolors. Gouache can also be used, but after the figure has melted, it will be painted more and can stain the whole class in the spring.

Colored ice figures are suitable for decoration, which must be prepared in advance by freezing water tinted with paint in molds. Children can also do this with their own hands. See photos for examples of figurines.

A good way to decorate is fabric, you can use colored shreds or whole canvases. In order for the fabric to be well fixed on the figure, you need to use it wet, then, freezing in the cold, it will keep its shape. Small shreds are glued to the figure using snow dough. You can ask the class to bring such scraps from home. Useless knitting threads will also come in handy, they will allow you to make original hairstyles for the sculptures.

Natural materials are also suitable for decoration: cones, rowan and hawthorn berries. The class can also collect such decorations in advance.

Joint creativity with a child allows him to discover his talents, love needlework, or even improve relations with his parents if they have deteriorated. Winter time contributes to this: you can create many interesting crafts, collages, drawings. It is not uncommon for children to be instructed by a teacher to bring something they have made with their own hands. This article is a cheat sheet for parents and children, what kind of winter crafts to make, how to implement it with your own hands and at the same time arouse interest in the child.

One of the most popular topics that are chosen to create thematic crafts is the "Winter's Tale". It is close to both children and adults, because on the eve of the New Year, I sincerely want to believe in miracles.

The winter fairy tale is associated with a decorated Christmas tree, snow-covered landscapes, gifts and lanterns - garlands. All this can be brought to life as part of a winter craft.

winter fairy tale in a jar

Everyone is familiar with the New Year's souvenir - a ball, in the middle of which there is a Christmas tree or other thematic attribute. When shaken, snowflakes or sparkles begin to spin. You can recreate a winter fairy tale in such a craft.

The process will not take much time, and the necessary material will not result in a round sum. Therefore, such crafts can be considered budgetary and spectacular.

What will the young creator and his parents need:

a glass transparent jar (can be from under baby food) with a tightly screwed lid;
small souvenir Christmas trees, a snowman, etc.;
sparkles or artificial snow;
glycerin, water;
hot glue.

The jar must be selected in size so that the tree, for example, can easily fit there.

Detailed description of the process:

First you need to do a fitting: put the Christmas tree in a jar, tighten the lid, make sure that the craft looks beautiful.
Now pour a little glue on the bottom of the lid and glue a Christmas tree or some kind of winter character. You can use the symbol of the coming new year. Let it grab.
Pour water and glycerin into a jar in a ratio of 1: 1 and mix.
Add glitter or fake snow.
Put a little glue on the threads of the neck of the jar.
Screw on the lid (herringbone looks upside down).

Let the craft stand for a while so that the glue glues the surface of the lid and jar well. Now you can shake the container and enjoy the winter fairy tale.

A similar craft can be done without liquid. If you use a beautiful container for storing bulk products, you will also get a good option.

For this, in addition to the container, you will need sugar and decor. The algorithm of actions is very simple:

pour some sugar into a container;
carefully lay out the figures;
close the lid.

The creative process will take no more than 15 minutes, and the result will surely please others.

winter fairy tale on cardboard

You can make a beautiful craft with the help of simple improvised means: cardboard, glue and cotton wool. The advantage of this option is that it gives a wide scope for creativity. The child can build a composition himself, choose the main characters, etc.

What is useful for work:

PVA glue and for plastic;
cotton wool;
any decor to your liking;
New Year's rain;
scissors;
brush for applying glue.

First you need to find a suitable cardboard base. To do this, you can use the bottom of a cardboard box.

Approximately compare where the decor will be located.

Lubricate the surface well with glue and spread the cotton wool evenly. It will be snow. You do not need to stick it only where you plan to place the figures.

Apply more “strong” glue to the bottom surface of the figures (Christmas tree, snowman, penguin, etc.) and stick to the cardboard.

Tear the rain into small pieces and sprinkle the craft. Lay out the paths from the beads.

You can also use special effects - candles. You need to place a few pieces around the perimeter of the craft and light them. Why not a winter fairy tale?

winter fairy tale and cones

Cones can often be found in winter crafts. They are easy to manage, they will fit well into any idea.

You can convey a winter fairy tale if you make snow-covered Christmas trees from cones.

For this you need to prepare:

corks from open bottles;
cones;
white paint and brush;
polystyrene or cardboard;
glue.

The craft is very simple:

A little glue is poured onto the cork and a bump is glued.
White paint is taken and a bump is painted so that it resembles snow. You can sprinkle with glitter.
A star is cut out of foam or cardboard and glued to the "crown".

You can make several of these Christmas trees and stick them on a plank. Such a composition will be a wonderful decor in the interior.

Crafts for children winter fairy tale, pictures

The theme "Winter's Tale" gives a great opportunity to choose a creative direction. Choose the appropriate option should be based on the skills of the child. After all, it is the child who should do most of the work. The task of parents is to help him and remove the shortcomings.

Several options for interesting crafts "Winter's Tale":

cardboard craft is suitable for older children

craft - appliqué from materials of different textures looks very impressive

pasta can also be part of the composition

Skating rink and fun, why not a winter fairy tale for many children?

Crafts from cotton pads are in every direction of creativity.

A winter fairy tale can also be embodied with the help of plasticine.

To develop creative talents in a child, you should try several techniques and make several different crafts.

Application winter fun, detailed with photo

The application "Winter fun" is especially liked by the kids. This is because they can portray what they especially like to do in winter: play snowballs, build a snowman, skate or ski.

There are many ideas for such creative work. Let's highlight two of them.

The advantage of such an application is that several techniques are used, and this option also involves cutting out small details. That is why it is suitable for the middle and senior group in kindergarten.

For work you will need:

And also cotton wool to realistically make snow.

The process will be time-consuming, because you need to cut out a lot of small parts and glue them. First you need to cut out all the elements that will be on the canvas. In this case, trees, children, birds and a snowman.

Then it follows, without using glue, to attach everything to the sheet in order to understand how to make a beautiful composition.

After that, you need to pour a little glue into some kind of container and take a brush. This is necessary so that there is no excess glue, because the elements are all small.

Glue all characters to paper. Where the snow will be located, also spread with glue. Pinch off the cotton wool and lay it out evenly.

The craft is ready. The most difficult thing is the preparatory stage, when you need to cut out the decor. And then the creative process will go faster.

Another version of the application on a given topic:

Here the base should first be painted with paints. For this, blue watercolor is taken and the background is drawn. At the top you can draw the sun and clouds.

Then comes the turn of the application. As usual, you can't do without colored paper, glue and scissors.

You will also need a few pieces of cotton pads and dry leaves that need to be torn into small pieces.

The most difficult thing in this application is to make a boy on skis. To simplify the task, you can cut it out of a magazine or print it first, and then cut it out and just stick it on.

Then you need to take care of the trees. To do this, the surface is smeared with glue and dry leaves are poured out.

Finely chop the cotton pads and lay out the mountain along which the skier rides.

The composition is at an angle. This is important to observe in order to get the effect of descent.

Application winter landscape, step by step

Application is impossible without the child's personal vision of the object of work. The theme "Winter Landscape" makes you appreciate the beauty of this time, highlight the important for yourself, and then transfer it to paper.

The child must choose for himself what he wants to portray: an urban winter landscape, a rural, snow-covered grove or mountains.

Below is an option in the style of "Urban winter landscape":

This application is based on cotton pads and colored paper. It is also suitable for children of the younger group of the kindergarten, because it does not have too small details and all the shapes are correct.

For the creative process you will need:

First, preparatory work precedes: you need to cut out larger multi-colored rectangles from colored paper - these are at home. And also smaller - these are windows and doors.

You also need to cut out snowflakes and cut cotton pads in half (but not all).

Now comes the crucial moment - you need to glue everything. It is better to take cardboard as a basis, so the craft will last longer in its entirety.

Then lower the brush into the glue and alternately smear each element and glue it in its place.

You can see the process in more detail in the following video:

Application winter sports, step by step

Many people associate winter sports with figure skating. The application in the form of skates will be an excellent souvenir for the New Year holiday, and can also turn into a Christmas tree decoration.

The master's set is small:

glue;
colored paper;
scissors;
paperclips.

Beads, sparkles, etc. can also be used for decoration.

First you need to make a blank: draw a sketch of skates on paper. Then cut them out.

The paper must be folded in half so that later you can attach paper clips.

Now you can do the decor and decorate the skates as you see fit. After that, a paper clip is taken and one edge is threaded between two layers of paper.

Such an application can arouse interest in the winter sport - figure skating.

Winter application senior group, step by step

In the older group of the kindergarten, children can already use scissors well, they understand how to correctly compose a composition, what technique to use in a particular case.

Teachers should teach children:

correctly place objects of different shapes on a sheet;
in parallel, select synonyms for the subjects with which the child will work;
new terms in the field of drawing;
must go through the process of socialization, so the heroes of the application should not be alone.

Considering that children in the older group can independently decide what to take as the basis for their application, the older ones can only remotely correct.

This option combines several methods for creating an application, so it will be useful for children to make it.

To implement the plan, you need to prepare:

peas;
glue;
cotton pads;
colored paper;
white paint for drawing;
tassel.

First you need to cut out elements of a snowman and a tree from colored paper. Then take a blue sheet of paper and glue the trunk. Put a Christmas tree of peas on top. To do this, each pea must be dipped in glue. The Christmas tree should be decorated with a star.

Then you should cut the cotton pads in half. Lay out a snowman from whole and cropped disks. Complete it with colored paper elements.

From cotton pads you need to make snow around. Use paint and a brush to create a snowfall effect.

The hardest part of this application is to make a Christmas tree, because the peas do not stick to the paper the first time.

Winter application preparatory group, step by step with a photo

Children in the preparatory group also have high creative skills, they can choose the technique and theme of the application themselves.

It is important to improve your skills, so light applications should be postponed and a complex complex option should be chosen.

This option is multi-level. The elements are arranged at an angle, which creates the effect of realism.

If you place objects incorrectly, you will get chaos. This is just a task for children from the preparatory group.

Few materials are needed: only glue and colored paper.

It is important to cut trees beautifully, because they set the tone for the work. To do this, use the snowflake cutting technique: fold the paper in half and make cuts on one side.

If the child is unable to do this, then you can use ready-made templates. One has only to cut them out and attach them to colored paper, circle and also cut them out.

When the trees are ready, you need to cut out the elements of the house, fence, clouds. The main canvas will consist of two colors - blue on top and blue on the bottom. This will also visually differentiate the application.

Lay out the elements in the correct order at the right angle and glue.

Winter application middle group, step by step with photo

Creating a winter application in the middle group is a mandatory activity. This develops the aesthetic perception of the child, teaches the correct combination of colors and shapes, to observe the measure.

You can take this option as a basis:

It combines the correct forms and carved, different textures. But at the same time, the application has one level, which makes it easier for the child.

Also on this option it is easy to get acquainted with the process of gluing not only paper, but also cotton pads, which is a more difficult task.

To create an application, you need to buy:

colored paper;
cotton pads (2 - 3 pieces);
glue and scissors;
eyes with a bead in the middle or can be glued from paper.

The algorithm of actions will be as follows:

Step by step execution will avoid mistakes.

Winter applique junior group, step by step with photo

Winter application in the younger group is impossible without the help of educators. Often it is based on a blank (for example, a tree trunk), and children only need to complete it.

At the age of 3 - 4 years, it is preferable for children to deal with plasticine than with scissors. Therefore, the option presented below will be the most optimal for this age category.

Necessary materials:

colored cardboard:
plasticine of different colors;
cotton wool

Step by step action:

Use colored cardboard as a base.
From plasticine, make details for the application (man, tree, slide).
Decorate the tree with "snow" (cotton wool).
Also, do not forget about the snowfall. White plasticine will help to realize this idea.

Such work also develops hand motor skills, which is very useful for brain development.

Winter tree applique, step by step with photo

A winter tree in the understanding of a child can be different: with a bunch of snow on the branches or, conversely, depressingly standing without foliage. It is difficult to imagine a more “winter” tree than spruce or pine. In festive attire, these trees are a symbol of winter, holiday, fun.

The algorithm of work will be as follows:

cut out two Christmas trees (larger and smaller) of different colors from colored paper;
glue a large template on the base first, and then a small one on it;
cut a star and glue it on the top of the Christmas tree;
take buttons, apply glue to them and stick them on a small Christmas tree;
Rhinestones can be glued around the perimeter of a large Christmas tree.

When a child works with buttons and other small objects, an adult must be nearby so that the child does not swallow these elements.

The process of creating such an application is presented in the video:

Volumetric craft winter forest, step by step with a photo

The voluminous craft "Winter Forest" will take a lot of time. But this is a good opportunity to develop a child's vision of three-dimensional details, to teach them how to properly arrange them in space, and measure them in size.

For example, you can take this work:

There are two options for creating it:

simplified (if there are ready-made figures of Santa Claus and the Snow Maiden, souvenir Christmas trees and a house);
more complex (all elements must be done manually).

To implement the first option, you need to take a cardboard base. Prepare all the elements that will be located on it and glue one by one. Larger objects, such as a house, will require more adhesive.

All the space that remains free, also smear with glue and lay out cotton wool - this will be an imitation of snow.

The fence can be made of cardboard, ice cream sticks or candles. The last option is very interesting in that they can be lit and the craft will look spectacular. But do not forget that it is dangerous. Vata can quickly catch fire, so you need to do this only in the presence of adults.

How to attach candles to the base? You can make small cuts in the cardboard and carefully place the candles there.

If there is no ready-made decor at hand, then Christmas trees can be made from plasticine.

And the house is made of matchboxes, as in this video:

Winter applications from cotton pads, detailed with photo

Cotton pads are frequent "guests" of winter applications. They are very reminiscent of drifts of snow, they are easy to shape, and you can also easily decorate with paints in the desired color.

A large selection of possible crafts is sure to inspire your unique creation.

Example #1:

All elements on this application (except snowflakes) are made of cotton pads:

the sun and clouds are carved out of them;
to create a snowman, you need to take a full-fledged cotton pad, as well as cut out smaller circles;
to make a Christmas tree, you need to twist the disks.

This application combines cotton pads and colored paper:

the face of Santa Claus, his hat, eyes and nose are cut out of colored paper;
the beard and pompom are made from cotton pads.

Everything is held together with glue.

A similar technique is used in this application:

You can see the creative process in more detail in the video:

Creative works develop the potential of the child, help him to see the beautiful. Whatever type of creativity is chosen, it should please the child, bring pleasure and reveal his talents. It is also important to show that a child can do beautiful things with his own hands.