How to weave an angel from colored rubber bands?
Very cute Christmas angels will turn out if you try to weave them from rubber bands.
An angel (angel) made of rubber bands. To weave this figurine of an angel, you will need rubber bands of white and golden color, a machine. Such figurines will be a good decoration for Christmas days.
You can also see:
How to make a Christmas angel from beads, from salt dough, from paper.
How to weave cartoon characters from rubber bands - Smurfs, SpongeBob, Patrick, Pokemon Pikachu, Peppa pig and others.
How to weave from elastic bands - a boat, an airplane, a typewriter.
How to weave from elastic bands - a fish, a dolphin, a chicken, a giraffe, a dove, an owl, a swan, a parrot, a snake, a panda, a dog (puppy), a cat (kitten), a bunny (rabbit), Angry Birds.
How to weave from elastic bands - a dragonfly, a ladybug, a bee, a butterfly, doll figures.
How to weave from elastic bands - a wallet, a handbag, a bracelet with a name.
How to make crafts for the New Year from rubber bands on the machine.
To weave a cute little angel, you need to approach weaving with some knowledge already. If you have learned how to work with a crochet and loom for weaving, then, perhaps, you just have to follow the instructions on the video and the result will be a cute angel figurine with small wings.
Such a figurine will be an excellent decoration on the Christmas tree, will give joy and a smile to everyone around.
You can see in detail and learn how to weave an angel figurine from colored rubber bands in several ways, you can in the video below - a flat version of a braided rubber toy or a bulky one, both look very beautiful.
A variant of weaving a three-dimensional angel from colored rubber bands
A variant of weaving a flat angel from colored rubber bands
To weave an angel figure from rubber bands, you will need rubber bands of three colors:
This video shows how to weave an angel:
An angel made of rubber bands will be a great Christmas gift that you can make yourself!
An angel figurine, gossiped with one's own hand, can become a wonderful decoration for the New Year and Christmas decorations. Of course, this is not the easiest craft, but the result is worth the effort. Even if you are a beginner in this type of needlework, you will definitely succeed in this figure if you sharpen such qualities as attentiveness, accuracy and perseverance.
A very cute and kind rubber band angel can easily replenish your collection of rubber band figurines. This gentle angel will be just a wonderful gift for Christmas, Valentine's Day or any other holiday. We invite you to familiarize yourself with the process of weaving an angel on the machine:
To make an Angel out of colored rubber bands, you need a pack of Rainbow Loom rubber bands of different colors and a machine to braid the rubber bands, as well as small sticks with a hook: one of the two sticks is smaller and the other is large.
You also need to have some skill on how to make crafts from rubber bands, or at least watch videos on how to do it. After studying the technique, you can independently try to make an angel out of rubber bands. Usually made from white rubber bands, although you can take a different color. And you can show the wings of an angel so that it is completely realistic. Such an angel can be made for Christmas and hung on a Christmas tree.
We take the machine - a slingshot and one black elastic band. Black color acts as the main color in this bracelet. We collect it on both sides of the machine and make one turn so that we get a figure eight.
Next, we prepare ourselves six blue elastic bands, six raspberry and six red elastic bands. The first color we'll start with will be tits (these will be our first hearts). We collect one blue elastic band on both sides of the slingshot and remove a black loop on them from the right side to the center. Then we remove the newly typed gum from the left side and throw it to the right side.
Thus, we got two blue loops on both sides.
We collect a black elastic band and remove on both sides along the first blue loop.
We collect the last blue gum. With the help of a hook, we remove the black loop from the right side to the center, from the left side we remove the blue elastic band that we just dialed and throw it to the left side.
Then we collect one black elastic band, to the center of weaving we throw the two upper blue elastic bands and the two lowest blue elastic bands. We got the first heart of blue. 
Next, we continue to pick up red rubber bands as we did, with blue. With raspberry elastic bands, the same weaving occurs
Weave the bracelet until it is the right size. Then we proceed to fixing. For this, you should have two loops left on both sides. We remove the last loop to the center, and the loop on the right side, throw it on the left and fasten the clip.
Every girl wants to be stylish and fashionable. And for this, she needs to have a lot of different accessories in order to select them for each outfit. And bracelets made of rubber bands in this case will be most welcome. Now we will teach you how to weave a beautiful openwork bracelet "Angel Heart". At first glance, it seems that it consists of rubber bands simply twisted together. But if you look closely, you will notice a lot of small hearts. That is why the bracelet got its name. In this lesson, you will learn the technique of weaving "Angel Heart" on a slingshot and learn how to weave a stylish bracelet in the shape of an angel's heart out of small rubber bands.
How to weave a bracelet "Angel Heart" from rubber bands with your own hands
As we have already said, the Angel Heart bracelet is woven on a slingshot. But what if you don't have it? you can, following the same principle, weave a bracelet on your fingers or on a fork.
Particular attention should be paid to the selection of colors. Since this bracelet consists of two layers: inner and outer, it will look beautiful only when the colors complement each other. And if the colors merge, then these layers will become invisible. Therefore, it is best to choose contrasting colors, such as pink and blue, white and black, blue and yellow. A bracelet made of rubber bands of different shades of the same color will look good. For example, dark and light pink. The main thing is that the color difference is clearly visible.
So, we will need:
- Rubber bands in two colors (for the outer layer about 50, for the inner layer - 25)
- Plastic hook from the kit or crochet hook (No. 4)
- S-shaped clasp
- Slingshot.
For example, to weave a bracelet 17 cm long, you will need 22 elastic bands of one color and 42 of another.
Now you can start weaving.
Progress.The pattern of weaving this bracelet is not complicated. Follow the photo instructions and you will succeed.
You need to hold the slingshot so that the open parts of the columns are turned towards you. Also, before starting weaving, you need to decide what color the core of the bracelet will be, since we will start weaving from it.
We take the first gum, we will have it white. We put it on a slingshot with a figure eight. We will not twist the rest of the gum.
Now in the usual way we put on a pink elastic band.
Now we hook the white elastic band on the left column and remove it to the center.
And we transfer the pink rubber band from the right column to the left, as shown in the photo.
Again we throw a pink iris on the columns.
We remove the white rubber band from the right column to the center through the pink rubber band.
We put a white rubber band on the slingshot.
From two columns we remove the upper pink loops to the center.
We put one pink elastic band on the slingshot.
Crochet the lower pink loop on the left column and remove it to the center.
We transfer the upper elastic band of pink color from the right column to the left.
We put on the pink gum again.
We remove the lower elastic band of pink color from the right column.
We will throw the upper loop from the left column to the right. Compare the result with the photo.
Now we will throw a white rubber band on the posts.
From two columns we throw off the upper pink loops to the center.
Now we repeat the main stage again. When the bracelet is the required length, it is necessary to finish weaving and fasten the lock. This is done in the following way. Remove all pink loops from the posts. Two white loops are transferred to one column and we cling to the fastener for them.
You have learned how to weave an Angel Heart bracelet without a loom. It's very simple. Such openwork bracelets look beautiful on the hand. They are very light and almost not felt. Now the bracelet can be worn or given to a friend.
"Heart of an angel" on the machine.On the machine, the bracelet is woven in the same way as on the slingshot. For weaving, you need only two columns. Therefore, the third row of columns can be removed from the machine. Lay the machine with the open sides of the posts facing you and start weaving, as indicated above.
You can weave several of these bracelets using different elastic bands, and you will get accessories for any outfit. After you have learned the Angel Heart weaving technique, be sure to learn other techniques, such as Dragon Scale.
Educational video on the topic of the article
Although weaving such a bracelet is not difficult, but if you are a beginner, you can easily get confused in the sequence of actions. If you have any difficulties during weaving, or you just like to learn from videos more, then watch the following selection of video lessons. They will help you master the Angel Heart technique.
In just a few minutes, you can create a stylish "Angel Heart" rubber band bracelet with a beautiful pattern! The product is very voluminous, and the surface of the bracelet is decorated with openwork hearts! In the manufacture of an accessory with such a pattern, it is best to use contrasting shades of rubber bands so that the inner chain does not merge with the hearts themselves!
The pattern of weaving such an ornament is quite interesting and uncomplicated.
And so, it is worth preparing such materials:
- rubber bands in two different colors;
- any hook for weaving;
- small machine "Slingshot";
- S-shaped clasp.
To begin with, it is worth deciding on the shades used and preparing them. In this case, the main chain will be green, and the outer hearts will be yellow! On a slingshot, put on an elastic band twisted by a figure eight.
Almost every weaving of bracelets begins in this way. Add another one on top, put it on both columns of the machine in the usual way.
Throw off the lower one on the left side, placing it in the center.
But the top one on the right, gently grab and move it back to the left column of the machine.
From this side of the slingshot, you need to perform the same steps.
To the elastic in the center, in the future you will need to hook the clip.
After that, another gum is added, but already green, for two columns at once!
The second loops on the posts (yellow) must be dropped to the center between the two "horns" of the machine.
As necessary, lower the product down the posts to make room for adding new rubber bands. Then, on both columns of the machine, you should add a yellow elastic band.
Crocheting the lower elastic band on the left, remove.
Throwing the upper right loop on the side of the machine from which the lower one was removed!
You need to move very carefully so as not to confuse the top and bottom loops. To do this, you can hold them with your finger until the next removal. With the next thrown rubber band, it is worth doing the same steps.
As a result, three elastic bands remain on the machine on each side.
Add after that, it is necessary, green.
Remove the first yellow one from the column.
Insert a hook under the remaining yellow elastic band and hook the last one.
After, reset it to the center. Do the same on the opposite side.
These actions are the main ones in weaving the "Angel Heart" pattern. By doing them, in a short time, your jewelry will gain the desired length, suitable for your wrist.
You need to finish weaving in the following, very simple way. When two rubber bands remain on the machine, discard the lower one from the "horns"!
Throw all four loops on one column.
Then, fix the clip on them!
Now it remains only to find the first rubber band at the beginning of the product and, in the same way, attach an S-shaped fastener to it.
Here is a bracelet, it turned out in the end!
Final view. Photo 1.
Final view. Photo 2.
Final view. Photo 3.
We also published a detailed master class on how to make a rubber band weaving machine on your own, which is functionally no different from the factory ones.
In order to weave such a charming bracelet made of colored Rainbow Loom rubber bands called "Angel Heart", we need:
- two colors of rubber bands, in our case it is purple and orange;
- slingshot;
- auxiliary hook;
- plastic clasp for bracelet.
Weaving stages
1. To begin with, we should decide which of the two types of rubber bands will be the main one, and from which hearts themselves will be formed in the bracelet. In our case, they will be orange, so we take the elastic band of the main color - purple, cross it in the form of a figure eight and put it on the slingshot, after turning it forward with the recesses in the columns. 
2. Next, take an orange elastic band, and put it on top of the slingshot. 
3. Now, with the help of a hook, we remove the lower purple rubber band from the left column of the slingshot to the middle. 
4. After that, from the right column of the slingshot we transfer the orange rubber band to the left. 
5. We throw another orange elastic band on the slingshot. 
6. And we remove a purple rubber band from the right column of the slingshot. 
7. Then from the left column we transfer the orange rubber band to the right one. 
8. The next step is to put the elastic band of the main purple color on the slingshot. 
9. And remove the top orange rubber bands on both sides of it. 
10. From above we throw another orange gum. 
11. We remove the lowest orange rubber band from the left column of the slingshot. 
12. Then, from the right side, we transfer the upper orange rubber band to the left side of the slingshot. 
13. We throw on another orange gum. 
14. This time, remove the lower orange rubber band from the right column of the slingshot. 
15. Now from the left column we transfer the upper orange elastic band to the right one. 
16. From above we throw another purple rubber band. 
17. We throw off the top orange ones on the purple elastic band from both columns, thus forming the first heart. 
18. Then we carefully remove the orange elastic band on the left column and stretch the lowest purple one through it, and drop it to the center of the upper one. 
19. We do the same with the right column. 
20. We throw another orange rubber band on the slingshot. 
21. Remove the lower orange gum from the left column. 
22. Then, from the right column, we transfer the upper orange rubber band to the left column. 
23. Again we throw an orange elastic band on both parts of the slingshot. 
24. We throw off the lower orange rubber band from the right column to the upper orange one, and then from the left we transfer it to the upper right orange. 