From satin ribbons 2.5 cm wide with buds on a cord.
For the manufacture of gum you will need materials:
- satin ribbons 2.5 cm wide dark and light Pink colour.
- scissors.
- glue gun.
- a needle with a thread in the color of the ribbons.
- a satin ribbon 1 cm wide in green.
- hair tie medium size.
- three shiny beads.
- two wooden balls with a large hole.
- a large needle for ribbons with a large eye.
- a little thick fabric to match the colors.
- lighter.
The decoration consists of two roses with a diameter of 5 cm and two buds hanging on cords, and they are 3 cm in diameter. Let's start with the bud. We take a dark pink satin ribbon and cut off 5 strips of 5 cm each. But the ribbons Green colour we take 4 strips of 5 cm each. And for the cord we cut 30 cm. For it, you can use a tape 0.5 cm wide.
We take a pink strip, expand it along the length, face down. We bend a little of the upper edge towards ourselves, press it with a needle. Now we need a large needle, we place it on the upper corner with a hem, at an angle of 45 degrees.
And starting from the very corner, we scroll the tape along the needle until the upper corner of the twist is in the middle of the strip. We take out a large needle, and a small one in the color of the tape, fasten the twist along the bottom edge with small stitches. In the opposite corner we do the same twist.
Pulling the thread, we slightly connect the resulting two bundles to each other, fix it.
We unfold the resulting petal on the front side and straighten it a little.
In this way we sew 4 petals for a rosebud.
We twist the fifth petal in a different way. We arrange the strip along the length from the wrong side. And we bend the upper edge towards us along the entire diagonal of the strip.
And we twist along the entire length, and fix the resulting tube.
We use such a tube-shaped blank as the base-middle of the flower. And with a needle and thread, we begin to assemble the bud. We apply one petal to the middle and fix it.
Alternately, we continue to connect the petals, placing them in a circle, fixing with a needle and thread.
But do not forget that our decoration has two buds.
Now let's start working on the roses. For one flower, we take 2.5 cm ribbons, but you will need 10 pieces 5 cm long, 5 pieces each of a dark and light shade of pink. We twist them in the same way as petals for buds. We make the middle tube dark.
We start assembly. We will use the tube and 4 petals of a dark shade first. And then sew the rest of the light petals.
In this way, two roses were obtained.
It's time for green ribbons. For two buds, the mode is 8 strips 5 cm long. And for two roses there will be 8 pieces of 6 cm each. First, we make individual leaves in the kanzashi style. Take a strip and fold it in half, right side inside.
We place the fold of the strip on the left side of ourselves, and we will start cutting on the right side. We start from the bottom corner, directing to the opposite upper corner, not reaching the 3 mm fold. And we connect this section with a lighter.
We turn it right side out and get a bag with a small hole in the bottom corner.
Now we fasten 4 leaves together at the bottom of the bag with a thread in the color of the tape.
And on the wrong side, we sew the side edges of the bags of neighboring leaves.
It turns out a blank sewn in the middle on the wrong side and with four sharp corners.
We take a bud and connect it with a leaf blank with a thread, leave a tail on the front side for further work.
We also make a lace for the bud. We take a thin ribbon 30 cm long and a wooden bead.
With a ribbon needle we wrap the bead with a green ribbon, leaving two tails in one direction.
Alternately, each piece of tape is twisted with your fingers in one direction. Then we connect both twists together, relax a little and they twist together with each other, making a beautiful tourniquet.
We sew this blank to a bud with leaves left with a thread. Now the bud on the cord is completely ready, but do not forget that we have two buds.
Now we take an elastic band for hair and sew a small strip of dense red fabric to it.
For the complete assembly of the decoration, all blanks are assembled. It remains to add 2 circles of dense red fabric with a diameter of 3.5 cm. And three more shiny beads, as well as a few triangles cut off from the green ribbon for the leaves.
Let's start the assembly. We take one red circle and with the help of a glue gun we fix two buds to it by the edges of the cords. And the places of gluing are closed with green corners.
For girls with long hair An elastic band made of satin ribbons will be a wonderful accessory. With their own hands, mothers can create many of these accessories. It is not difficult if you delve into the basics of several techniques for working with fittings. From the article you will learn how to make an elastic band from satin ribbons using the kanzashi technique, how to make a lush American bow. You will learn the intricacies of working with fittings by studying the master class. Elastic bands from satin ribbons do not happen much! Keep it up, you will succeed!
Satin Ribbons for Beginners
In this master class, we'll talk about how to make 2 elastic bands with bows for young princesses. To create a product you need:
- 2 satin ribbons 2.5 cm wide and 1 m long.
- Two satin ribbons 0.8 cm wide and 1 meter long.
- A piece of satin ribbon 8 mm wide and 0.5 m long.
- Decor for the middle of the bow.
Cut out two 6cm x 8cm U-shaped pieces of cardboard. Cut off the end of the large ribbon so that it becomes sharp.
Wrap it around the template so that the end and two folds are at each edge of the cardboard blank.
Fix the tape in the center with needles and sew. Use a forward needle stitch for this.
From thinner ribbons, fold two bows, connecting them into a ring. Lay one on top of the other and fasten. Do the same with the second piece. Wrap the middle with a thin ribbon, attaching an elastic band at the back. Glue.
Elastic band on a bunch of satin ribbons
In this master class, you will see how to create an elastic band from satin ribbons. With your own hands, you can make a hair bun decoration. This accessory is especially relevant for little girls who are engaged in rhythmic gymnastics and dancing.
An easy option for beginners
In order to understand the principle of sewing such an accessory, we recommend starting with a simple decor. Prepare 5 small bows, following the recommendations of the previous master class.
Take a rubber band. It is convenient to use a blank with perforation. You can sew a button to it to adjust the size of the product depending on the thickness of the beam.
Cut out 6 circles from felt. Make 2 cuts in them for threading the elastic.
At the back we will have a large bow, decorated with a cabochon and rhinestones. For this element take:
- 2 pieces of satin ribbon measuring 5 by 28 cm.
- 2 satin ribbons 2.5 cm wide and 23 cm long.
Form two bows. Put the small one on top of the big one and fix it.
For the elegant ends of the bow, prepare two pieces of satin ribbon 5 by 10 cm. Cut the corners of the blanks obliquely so that the ends look symmetrical.
Gather the top of the ribbons. Sew the blanks together. Glue the ends to the back of the bow. Decorate them with rhinestones, rhinestone ribbon or lace.
Take a small piece of thin satin ribbon and wrap it around the bow, while grabbing the elastic in the middle. This way you will attach the largest bow to the base. You can decorate the middle of the decor with a cabochon or a small flower made of fabric or foamiran.
All parts on the elastic band for the beam are movable. You can disassemble the product and use the bows separately, putting them on the hairpins.
In a similar way, you can attach more complex decorations to the elastic band, for example, flowers with leaves created using the kanzashi technique. So we figured out how to make an elastic band from satin ribbons.
American satin ribbon bow
Prepare for work:
- Two satin ribbons 5 cm wide and 60 cm long.
- 2 ribbons 0.5 m long and 2.5 cm wide.
- Six grosgrain ribbons 12 cm long and 2.5 cm wide
- Four ribbons of grosgrain fabric, 35 cm long and 1 cm wide.
- Two rubber bands.
- 2 mugs made of felt or foamiran.
- Decor for the middle of the bows.
Tools that will be needed for work:
- sharp scissors;
- candle;
- needles and threads;
- glue gun or Moment Crystal glue
Scheme of work in stages
Take the two widest blanks and melt their ends over the candle. Close their edges into a ring. Make a bow from the blanks by sewing two pieces in the middle. Pull the thread and hide it. Do the same for the decor of the second gum.
Melt the edges of the rep ribbons as well. Sew a bow from the blanks.
Making flags
Now you need to add the resulting bows. Take six blanks and cut the edges as shown in the photo. Treat the corners with a lighter. The thinnest blanks are folded into loops.
All parts of the bow are ready. You can proceed to the assembly of the product. This must be done strictly in a certain sequence. Attach flags to a large bow. Sew the blank with threads for reliability.
Next, lay the loops of thin tape and also quilt with a needle. Lay the ribbon bow last. Sew and glue the product for reliability. Fix the decor in the middle of the bow.
Attach an elastic band to it, dropping a little glue, and close it with a felt base for reliability.
Lilac flowers in kanzashi technique
At the end of spring, we hide the hats of our daughters on the mezzanine. I want to decorate their heads with something cute. We suggest you make lilac flowers using the kanzashi technique for decorating rubber bands.
Making petals
Cut the satin ribbon 4 cm wide into squares. Take one and fold it in half to form a triangle.
We bend the lower and upper parts to the center to form such a figure as a rhombus. We bend it in half and get a petal. The edge of the workpiece must be compressed and melted over a candle or processed with a soldering iron.
Everyone knows that lilacs have four petals, but you can make those flowers that you were looking for for good luck - lilacs from five elements. Collect the elements with a thread and a needle. Glue in the middle of the rhinestone.
In order to shade the white lilac, we will make some green petals. Cut a 4 cm wide satin ribbon into rectangles. Their length should be 6 cm. Fold the element in half horizontally. On one side, cut off the tip with scissors and melt. Before singeing the edges, connect them together. The blank should come out as in the photo. Wrap the remaining tips in the opposite direction to the center. Melt and pin the end.
Glue a few leaves to the back of the lilac flower. Using a hot gun or instant glue, secure the elastic to the decor. Cover it with a circle of felt. Here we have such an elastic band made of satin ribbons. With your own hands, you can make headbands, hairpins, bandages with such decor. Hats, caps, belts, dresses are also decorated with flowers using the kanzashi technique, brooches are made from them, decor for caskets, mirrors, soft covers of wedding albums.
Small flower "Flower-semitsvetik" for gum
For very young girls whose hair is not yet very thick, voluminous decor does not fit rubber bands. Mom for her crumbs can make accessories with small delicate and simple flowers.
Following the title, we will make a flower with seven petals. cook thin tapes seven different shades. For each petal, we need to cut pieces equal to 2, 3 and 4 cm. Melt the edges of the blanks with a lighter.
We sew blanks
Fold each piece into a loop. Insert all three parts into each other and sew. Similarly, collect all seven multi-colored petals. Straighten the workpiece. Tighten and hide the thread.
Cut out two circles from felt or foamiran. Stick one on back flower. Put a drop of glue, attach an elastic band and close it with a second piece of felt. Similar flowers will also be an excellent decor for hairpins.
Hair bands made of satin ribbons are accessories that will come in handy in any situation. Girls should have a lot of them. Now you can independently decorate such an accessory as an elastic band from satin ribbons. With your own hands, create jewelry for every day and delight yourself and your daughters.
Spring has finally come, we are cleaning outerwear and hats, and it will be possible to make different hairstyles for hair, as well as decorate them with beautiful hairpins, rubber bands, headbands, etc.
Let's try to make a chic elastic band decorated with satin ribbons and rhinestones.
In contact with
How to make an elastic band from satin ribbons: a master class
Before work, we need to collect the following materials:
- a simple rubber band for green or white hair;
- sharp scissors;
- glue gun;
- thread and needle;
- ribbons of lilac and light green satin two centimeters wide;
- a thin satin ribbon of a light green shade 0.5 cm wide;
- green satin ribbon 5 centimeters wide;
- various rhinestones and beads for decoration;
- lighter;
- oblique inlay of snow-white color;
- green organza ribbon with a width of 2.5 cm.
Satin ribbon gum master class, description
First, we create the main detail for decorating the rubber band - this is satin ribbon flower. We divide the ribbon of a lilac shade into segments six centimeters long. In total, ten such pieces will be needed. We solder the edges a little with a lighter so that they do not crumble. Fold the piece in half along the length and sew all open edges with a basting seam (we will not touch the fold line). We stretch the thread, thereby collecting the material with an accordion, and fix the thread. In this way, a petal is obtained.
Let's do the same with other segments and start collecting the flower. We roll the first petal with a tube and fix it with a thread with a needle. We will glue the other parts in turn with our gun. We cut a thin satin ribbon of a light green shade into pieces six centimeters long. You will need eight pieces in total. Fold in half and glue the edges together.
Glue all the elements to the back of the flower. From a satin ribbon of a dark green hue, cut out squares, the sides of which are equal to five centimeters (five pieces). We fold them diagonally so that at the end we get a triangle. Once again, fold everything in half and secure with a needle. Now fold the side edges to the middle on top of each other and sew together. Glue the leaves to the flower. We divide the organza ribbon into four pieces ten centimeters long. Fold the pieces in half and sew two together.
Let's glue everything. Then we take a piece of light green ribbon (two and a half centimeters wide) twenty centimeters long, we outline one of its edges along the length. Gather the ribbon with an accordion and sew the two open edges together. Glue to workpiece. Glue a rubber band in the middle. From a white oblique inlay, cut a piece five centimeters long. Glue the edges to the light green ribbon, passing through the elastic. In some places we add rhinestones and beads, and a great do-it-yourself scrunchie is ready for use !!!
Do-it-yourself ordinary rubber bands from satin ribbons: a master class
For a pair of elastic bands, we will need the following materials:
- white ribbon with black polka dots 2.5 cm wide - 1.5 m;
- black ribbon with white polka dots 2.5 cm wide - 1.1 m;
- lighter;
- silicone glue and a special gun;
- four mugs of felt with a diameter of 3.5 cm and a small strip of felt;
- two rubber bands for hair;
- two centers for flowers.
For the middle of our flowers, you can take small beads or oval buttons. You can use rhinestones or sweets.
- Master class, description
First you need to do it yourself flower petals. A black and white palette is always popular, although you can choose a solid ribbon or two bright colors.
Two flowers will require 1.1 m of black polka dot ribbon and 1.5 m of white polka dot. It must be cut into segments of 6.5 cm.
For one flower, you need to create eight petals from a black ribbon with white polka dots and eleven pieces from a white ribbon with polka dots. It turns out that the segments should also be the same.
To create a petal, you need to lay out the tape in a certain way. Then bend again to make a uniform triangle at the top. To fix the ribbon, it will be necessary to draw a lighter along the base of the petal. Since the fire will melt the ribbon, it will hold together well. Then the second. Petals will be enough a large number of. We collect the flower on a felt circle. The first layer is made from dark petals. After that there are two layers of light parts. To tightly attach the flower to the accessories, that is, to the hair band, we need a circle of felt.
It will be necessary to make two small cuts on the felt and fix the rubber band using glue and a felt strip. And it remains only to glue the flower and the base. Elastic bands flowers from satin ribbons made by hand. Such cute and, most importantly, good hair bands can be made quickly and without much loss of money. So that the products do not lose their splendor, it is recommended to spray them with hairspray. Then the do-it-yourself flowers will become a little tougher and, accordingly, will last much longer. So we have finished our master class on creating beautiful rubber bands. You can also make gummies out of candy, but that's another story.
DIY hair bands
Evgenia Smirnova
To send light into the depths of the human heart - this is the purpose of the artist
Content
Modern needlewomen make such skillful jewelry that one can only be surprised. They are able to make a hair ornament that will emphasize the beauty of the hairstyle, in a few different techniques. Satin ribbons for elastic bands are considered a convenient material, because you can create from them from a flower to a decoration for a beam using simple techniques.
How to make rubber bands from satin ribbons
Craftswomen are able to make rubber bands with their own hands from ribbons in several techniques, which, upon careful consideration, become quite simple. The main thing in this business is to learn the basic skills, follow the schemes and master classes and use your imagination to get a beautiful decoration that is distinguished by its individuality and spectacular appearance.
The basis of the manufacture of elastic bands is the technique of weaving, folding and collecting elements into one large pattern. It is better for beginner craftswomen to take basic skills as a basis, learn them, and then start to complicate. Even simple rubber bands can look spectacular on a girl's hair if they are skillfully decorated. Options for decorating finished products are embroidery, weaving, beads, beads, sequins. You can try the most different variants decorations to make beautiful decorations.
The materials for the manufacture of rubber bands are satin ribbons of different colors and shades, beads, beads, decor elements. Of the auxiliary tools, you will need textile glue, scissors, a glue gun, a fire source (lighter candle) and skillful hands. Sometimes craftswomen take a ready-made rubber band bought in a regular store and decorate it in their own way. In this case, you will need a base where the elements will be attached - cardboard, metal hairpins, plastic crabs.
Elastic bands from ribbons using the kanzashi technique
A well-known technique for creating elastic bands from satin ribbons is the Japanese art of kanzashi. To make a beautiful children's hair accessory that resembles a dahlia or chamomile, girls need to follow the master class:
- From a satin or silk cut, make 16 square patches 5 * 5 cm in size, run along the edges with a lighter so that the threads do not come out. Repeat for the other color (inner petals).
- For the outer row of petals, bend each square diagonally, repeat, fire over the corner. For the inner row of petals, the squares are bent diagonally three times.
- Fold the smaller workpiece inside the large one, glue it.
- Make 12 single-layer blanks for additional decoration.
- From thick cardboard cut out 2 circles with a diameter of 3.5 cm and 2.5 cm, glue over with a cloth.
- Glue each two-layer petal to a large base in a circle. Repeat for the second tier. Glue single-layer petals to a smaller base. Glue 2 bases together.
- Decorate with beads, glue the resulting flower on a hairpin or crab.
Elastic bands for hair from ribbons of different widths
Do-it-yourself rubber bands from satin ribbons, made of material of different widths, are spectacular and voluminous. There is a master class for making an accessory:
- Cut out a rectangular blank 9 * 16 cm from cardboard, draw a horizontal line in the middle. Wrap ribbon around it.
- Remove the skein without damaging the coils, stitch the middle, pull it off until a bow is formed.
- Repeat the technology for making a bow from a different material and a narrower ribbon.
- From a fabric of a contrasting color, cut out pieces of the same length and width as the resulting bow, singe the edges.
- Collect all the elements on a string.
- Cut out a cardboard circle, cover with a cloth, sew to the rubber band.
- Use a glue gun to glue a bow on a circle, decorate with small beads, rhinestones, buttons or pebbles.
Elastic band on a bunch of satin ribbons
To make rubber bands from satin ribbons with your own hands, decorating a bun-bun, girls will need to follow the step-by-step instructions
- Cut 6 pieces of green ribbon 4 * 2.5 cm into a dome, singe from 2 sides to create a wave - these will be leaves. Bend the bottom edge in two places, glue in the center to get a concave even part.
- Cut 12 pieces of white ribbon 4*2.5 cm and 5 pieces 3.5*2.5 cm in a semicircle, singe, glue into a droplet.
- Glue 5 blanks together by overlapping each other, decorate with stamens.
- Repeat for 14 rose petals from 4.5 x 2.5 cm pieces.
- Round off the first layer of white details, glue the remaining petals, make the second layer around the circle from pink elements. Glue on the leaves.
- Make 5 similar blanks.
- Bend 4 pink segments 10 * 5 in half, glue the ends with a fold, connect with a bow. Repeat for 2 white blanks 9 * 5 cm.
- Fasten 2 white ribbons 8.5 * 5 cm and pink 9 * 5 cm with a white overlay on the pink layer, form a fold, decorate the bottom with beads. Glue the bow, masking the middle.
- Glue felt circles with a diameter of 3.5 and 2.5 cm to the back of the bow and flowers, sew all the elements onto the sewn lace elastic. Decorate the bun.
Ribbon bands with bows
Bow decorations look spectacular on the hair, which can be made by following the instructions:
- Take 2 ribbons 2.5 and 0.8 cm wide, 1 meter long; 1 ribbon 8 mm wide and 50 cm long.
- Make 2 cardboard templates in the form of the letter P, 6 and 8 cm in size, cut off the edge of the wide ribbon along the oblique, lay it on a large template so that the cut and 2 folds are from each edge.
- Fasten the ribbon in the center with pins, sew a “needle forward” seam, assemble, fasten.
- Repeat for the second bow, sew together, attach a bead in the middle.
Check out the tutorials on how to make.